วีดีโอ

It's Nylon. Small parts are ok without the enclosure shut but big parts will fail and warp badly.

Yeah it gets rough from there. There's a nice write up on printables by a user that helps a lot. Check it out. Goes by the name YELL on discord.

No I would not recommend the V2 nor the KLP1 at this point. The KLP1 I got was the first generation and it was very bad no matter how much I worked on it. The V2 was a good concept but it also suffered some quality control issues on the belt path and my cantilever rail was loose and wouldn't tighten up so my bed level wandered from print to print. There are better alternatives for my money. I can pick up a refurbished Creality K1 for same money and it's enclosed.

Haha you are clueless. The laser moves on this device, then table relocates for additional scans. That may be sub-optimal but that's HOW IT WORKS, so telling me I'm using it wrong just makes you seem ignorant.

SERIOUSLY??? LOL Calm down. I can't believe you even posted this video OR replied to rather then asking forgiveness for posting it. Look at your video. The target is NOT rotating 360 degree while the laser is fixed on it. In fact the target NEVER rotate 360 degrees. The laser scans the area then target rotates about 5-10 degrees after the laser passes. Then it does the same thing again. As I said you should learn how to use it first - then demonstrate how to use it properly. Out of the two people that commented and over 100 total views you don't have a single thumbs up LOL. I wonder how many thumbs down . . . but you surely know LOL. You should take this video down as it must be embarrassing. So . . . who looks ignorant and clueless now? ROTFLMAO! @@crazynanoman

It seems to like orca slicer more than cura. I still struggle to get first layer repeatedly. It's printing ok. It's the worst print quality of any of my printers but it does function now.

That's 4 thicknesses of paper or a few layers of filament right. Not enough? 0.010" is 10 thousandths...maybe your not saying what you mean.

Can you post some pics of things you printed? The printer does print and print fast, my problem was the layer quality was poor and given many other printers including kingroon KP3s this one had something wrong. It was heavily modified to attempt to fix issues and the issue remained.

it is

It's passive enclosure, but gets up to 50 or so with doors shut and bed turned up. Letting things soak for 20 minutes before a print helps a lot.

@@crazynanoman great 👍 what is the print speed for this gear in video? I'm just creating thermal box for my printer now, very interesting how it can increase print performance for nylon filament printing...

I think print speed was 120-150. I never run my printers wide open and favor quality rather than speed.

@@crazynanoman 120-150?! it is supersonic for nylon print! Cool! 👍

Printed bed supports to stiffen the bed. I posted the files on thingiverse. Search KLP1 support arms to find them.

Which is it over or under or you don't know? It's not filament as I dry it and prints beautiful on other printers. It could be slicer but it's Kingroon's profiles and slicer.

I have no regrets on Siboor kit. It's one of my best workhorse printers.

I'm not sure but my braces help a lot and they changed the bed to make it stiffer. I think my issues are hotend related. I want to try their new improved hot end for it.

@@crazynanoman ic. Thks. I thought it were to do with bed vibration and yeah their gen2 seems to have an all metal hotend. I am tinkering if I should get one for the price. The K1 is more expensive but heard there are some proprietory software issues like one needs a cloud account for the app to work that sort, which is a bit of a concern for me

@@quarkpix K1 is better printer hands down. It's also more $$. The app sucks but I don't use it so not a biggie for me. I don't think I'd buy a KLP1 at this point if I could do it over again. Just doesn't work well and quality issues. If you don't need an enclosure, the V2 is decent and fast.

@@crazynanoman you mean voron as V2? Yeah. True. K1 one can choose not to use the app. Many thanks 👍

That's true for stock printer but I designed support arms that greatly stiffen the bed. They help but don't completely fix the issues.

Great no....not hardly. They are much better but not as good as my other printers including P1P, Voron, Ender 3V2, KP3s S1

@@crazynanoman Should i get a Voron 0.2, or this printer on your opinion?

@@baladdzso depends on your situation. The V0.2 is not a good ONLY printer, but a great second printer. It's fast and works great if setup well. The KLP1 has too many issues for me to recommend at this time. I'm testing a K1 now and it may be a good alternate.

@@crazynanoman Well, it would be my first printer...

@@baladdzso the Voron is a bit small for an ONLY printer but it can print all the parts for a bigger Voron. I just tested the K1 and it's impressive. Cheaper than a Voron, runs Klipper and enclosed.....hmmm.

I would NOT recommend the KLP1 printer at this time. I've had issues from day 1 and although Kingroon has worked to help me and even offer replacement parts, it still doesn't print well.

@@crazynanoman Ahh, it's a shame, it looks like a great printer. I asked kingroon, and they said late july they will re-release the klp1 with 310 hotend and some fixes... I think i'll wait.

@@baladdzso there are pics on AliExpress of the NEW revised KLP1. It looks better but my issue seems to be rigidity related. The new pics do have stiffer bed support bracket so might fix the root issue, not sure.

@@crazynanoman Ohh really? That's great to hear. I think i'll wait till mid august or early September, i hope they fix everything

It has everything in it I cluding some extras. It looked good and fit great. Only had 2 issues and Siboor took care of them right away!! A+++

It's not dead but does seem intermittent and will go many cycles working and then stop working and crash right into the bed.

@@crazynanoman try to adjust height of sensor, it should be 1-2mm higher than nozzle. Max distance to the platform 2mm for LJ8A3-2-Z/BX

@@VAZHURERACING yeah I've done that at 1mm above. It drives right down into the bed until the lead screw pops out of the setscrews in the top bearing. Mine is only held with 1 set screw at the top.

@@crazynanoman I invistigated issue with the Z sensor th-cam.com/users/shortsXH4Gtn1o7sM?feature=share

This is NOT as good as a Voron or Bambu but it also cost much less. I am struggling to get good prints off this printer as it was shipped with damaged components. Kingroon says they will ship replacement parts but have not gotten anything yet. I love my other kingroons printers but this one has issues for now!!!!

@@crazynanoman Thank you for you reply. Are you going to test Creality K1 as well?

​@@sabotage3dI would love to but I have more printers than my farm needs at the moment and getting these first gen models seems to be a bit risky. I'm happy with my Vorons and my Bambu P1P for fast printing, but I do think Klipper is the way forward. I think the Creality K1 looks higher end than the KLP1 but reviews on the build quality are hot or miss right now....hmmmm.

@@crazynanoman I guess we have to wait for revisions on all of these.

@@crazynanoman what problems do you have , in addition to bitwise acrylic and door fasteners , there were no belt fasteners , otherwise it prints well , only of course the configuration is a little unclear , cura is not friends with it normally yet , you need to change a bunch of settings, select by trial and error , tell me what spare parts you requested for replacement, maybe I it's also worth checking them out

Actually Would want bed at highest position to prevent z bearings from hitting before z probe. I cannot make bed higher as it was bent badly from the factory.

@@crazynanoman aha you need fix the bed before 😆

@@s3dprint bed is okay as adjusted flat, but cannot unscrew to make bed higher. If you look in the video you see the nozzle stops bed moving higher and bearings hit to cause noise. Only fix is move probe lower compared to nozzle. I can do that again but it seems the probe is not 100% triggering.