วีดีโอ

Tip: deep wata wash isnt that deep. But bulky sheets has the depest wata level. Bulky sheets wash has the water go to the door seal.

I had mine changed while the Samsung washer was still under warranty. Within 2 months (after warranty expired) the UB errors came back. This top load is crap. I regret buying Samsung.

POS fan just stripped apart on the shaft. So took the oscillating tool to it. I’ll pay the $13 to replace it

I replaced this and after a few weeks it started having the same issues

What if these were replaced about 2 weeks ago but the washer is still constantly going off balance? Tried smaller loads, different settings, changed amount of soap, tried only cold water, nothing matters. Every size, temp, cycle, amount of soap or softener, it still goes off balance every load.

Mine is leaking water. Any suggestions?

Definitely make sure you have plenty of room. This repair does not work well with tight spaces

Friend you just saved me a new washing machine. Thank You!

I would but he dosent

What is the model#. I bought the same. Used but no model #. Thanks .

I just got mines and it’s not even heating …. Wtf

Thank you Sir. Is there any reason why you didn’t check the continuity on the heating element

Do your washer fill with water like a top loader would….. like clothes submerged in

Can u help. The bottom part works fine but top part not freezing food but it's cold....

Throwing it on the ground worked for me thanks man

I have this fridge and replacing the defrost timer fixed everything. If I wasn't able to fix the fridge, my lady was going to want to buy a new $1,800 refrigerator. Thanks for saving me some money.

My Kenmore upright freezer is not staying cold. Light is on , fan is working but coils are not very cold . Any ideas for me ? I really do not want to but a new one if I don't have to.

Just used this video to fix my washer and impress my wife. Thanks! BTW, the piece on the bottom of my washer was white metal, so a lot easier to spot.

THANKS as a recent widow after 55 yrs it is hard learning to do this stuff myself...

Thank you so much for this video. I unplugged for 5 minutes as suggested in other videos. When I plugged back in it still had the error codes blinking but I followed your steps to reset and now it's working fine. If I get the codes again I'll take apart as in your video and clean and coat the contacts. Have a wonderful day.

Thanks for the video. Question. I noticed that there is a spring attached to one my suspension rods and the drum?? Is that correct or needs to be unattached?? It’s only attached to the front right. Washer shakes really bad at the beginning of each rinse cycle. Thank you.

I added the new lid lock and lock relay. Will this method still be the same for that?

I'm a woman and I did this with Jesus and it's successful.😅.

Thanks for the info. I just got the same running boards for my daughters 2020 Ridgeline. I'm going to go to Lowes now and upgrade the bolts, clean out the holes with WD40 and use some Locktite.

Hello. I am still troubleshooting my Amana. It is agitating on the “fill sensing” mode. I have went thru several diagnostic tests, but no error codes are showing up. I replaced the water level switch, but still no luck. Do you have any idea what I should do at this point? 😭😔

Either the Capacitor is starting to fail or the motor is going, in the sensing, it spun up extremly slowly, even with heavy loads it should still spin faster than it did, i think its a bad cap, or cap starting to fail, or motor is starting to fail

How do I get the top piece separated if the clips are plastic? Don’t want to break them while trying to access the control panel.

My question is why you only change the front two rods and not back ones?

I have the same dryer. I already replaced the thermal fuse along with the other 3 pieces. I took it apart and cleaned all vents. I also replaced the interior bulb as it broke went the dryer stopped working. After doing all that, the dryer still won’t start. I just checked the heating element and a coil is broken. I just ordered the part, but can a heating element prevent the dryer from completely starting?

I have a WM2501 H*A (per the cover of the manual) I found out the Motherboard is no longer available from LG

CAn you give us the specs on the fuse?

Our 14 year old LG quit working. Had no idea what to do, but saw your video. Then it all fell into place, and looking at the noise filter revealed an upgrade part number. Definite proof that was what I replaced last time. Oh, I shortcutted by checkig the fuse on the board. Same issue as last time.

Thank you so much for this video! My Maytag was giving me this error and your extremely well made video and clear instructions got it working again. Praise God!

Great video very helpful if you could have used a flashlight or trouble light to to show the part that moved would have helped a great deal. Thanks.

Nice clean washer.l bought this exact one from a used appliance store not realizing there was NO model #info.Now i need some parts but cant order any without#. If you could Please let me know yours im shure it couldn't hurt. Thanks for any help👍

Trying this tommorrow, will let you know how it goes. Remind me of fixing my dryer 10 years ago... th-cam.com/video/JRw_0eGkMAs/w-d-xo.html

My Whirlpool Cabrio washer with the Steam Clean option is working again thanks to this “How To” video. I can only imagine how much $$$ and down time you saved me. I did have to buy the nail polish 😁, but a couple dollars is literally a small price to pay versus a professional repair or a new washer. THANK YOU Josh!! 👍👍

Does It Do A Spray Rinse On The Beginning Of The Final Spin Cycle

I have the same fridge that I just purchased new Oct 23. Last month the freezer was cold, but fridge was 60. Under warranty called for service (reviews were horrible for the service company). Tech pulled back wall of the freezer off to find it frozen. He replaced a motor in there and had me let the freezer defrost for 48 hours. Three weeks later, the freezer went from 0 to 10 and the fridge is 65. I do not want that service company again.

Howdy! How can I unlock a self-locking minusforty frozen food door?

Appreciate you. Great straight forward, no nonsense video. Very well done

Can’t believe it but I really thought mine woukd be one of the five out of forty that wouldn’t work. But I sure as heck worked thanks man great video.

Hey Josh, this looks exactly like what my washer needs however when i searched my model number on the parts page I do not find these parts at all. Here is my model number: WTW4815EWO. Any assistance you can share would be much appreciated!

How do you repair the agitator

I want to watch for dryer doesn't agitate

You're my hero! Exactly what my problem was. Thank you.

I am having this but with a brand new actuator original, kinda frustrated atm ngl Did you remove the transmission to clean it?

replaced rods. still won’t complete spin cycle.

I've seen several videos on this exact repair, and you're the only one who recommended hanging the old rods from the frame and swapping them two at a time. Genius! Much easier than the others with their "drop the entire basket and then struggle to lift it up several times" methodology.

Thank you so much. Was not wanting to go get a new machine altogether