วีดีโอ

NOTE: After a few months of riding with the steel gear, if you have a high powered BBSHD setup, DO NOT use the steel gear. I personally don't recommend it. Get the PEEK gear that's far more durable and longer lasting in many ways. The steel gear unfortunately will damage the gear on the rotor side of the motor and will be littered with steel shavings. I won't lie, the steel gear is VERY loud bu...

This tutorial covers BBSHD PEEK gear install and what to look for when servicing the BBSHD mid-drive motor for your eBike! This applies to replacing the Nylong gear as well. While this BBSHD has Mr. HV's kit, the disassembly is identical to the stock BBSHD motor. Video sections are down below! 0:45 Taking off the cranks 3:40 The motor is taken off ready to be opened 7:36 The motor opened with s...

Having way too much fun with the recent upgrade! Sometimes, speed and power come at a cost! The powerful BBSHD eBike upgrade kit from Mr. HV here on TH-cam allows the BBSHD to run up to 4,000 watts with ASI's BAC855 controller and 72V battery. More power on this eBike means faster wear and tear or sometimes, certain components simply do not hold up to the task. Song by: Bobo Renthlei - Moving I...

Shimano Cassette can be disassembled with some drilling. It's a lot easier than I thought! I did this as my 10-speed Shimano Cassette was either going into the trash with a bent 32T or salvaging it by taking apart the cassette. Problem #2: With the upgraded BBSHD mid-drive ebike kit and pushing 4000 watts, the torque is causing the cassette to dig into the aluminum hub shell with less than 200 ...

BBSHD can be upgraded using Mr. HV's Kit (High Voltage) using ASI BAC855 controller with 52V/20Ah battery! Better yet, it's designed to take full advantage of the kit and the motor by using a 72V battery to push upwards of 4,000 watts! With low gear at a 1:1 ratio, it can hit 45mph while bringing an insane amount of torque! More power comes with a lot of responsibilities and THIS can happen inc...

A short video of the BBSHD mid-drive upgrade using Mr. HV's upgrade kit with ASI BAC855. My custom 72V is not here yet so testing with a 52V/8Ah battery. It reached 2600W at 40mph top speed. BUT, the torque is absolutely insane 🙀🙀🙀 72V will reach up to 4000W!!! BBSHD Upgrade Kit Questions? Come to the Discord Channel! discord.gg/mtq2jWeNMs

This is my DIY mid-drive e-bike build and hoping to share some build diaries so you too can build your own custom e-bike! I have not decided on the motor but will be at least 1000W; which is considerably more powerful than the 350W rear hub setup I had as my first e-bike. Stay tuned for more videos as my progress continues! Frame: Brand-X HT-01 27.5" hardtail (medium size) Brakes: Magura MT7 hy...