วีดีโอ

real cool video

Thanks Jeremy. I also make crosses (wood) and give them away to strangers mostly. Take up your cross and follwo me! Jesus MIke Boyle

Thanks Jeremy i believe this will help me fix my neighbors car it’s a 2000 Avalon with the same code and well he’s an older cat and can’t see or do this on his own so i help him out as much as i can

Does anyone know if it’s about the same for the V6 Camry?

i can see your problem... you dont follow the instructions as they are given.

You are good bro

Thank you for sharing

Not a fan of this video presentation. I'm a DIYer with an '08 Yaris and today is the third time I've replaced the bulbs. I always replace both at the same time even though only one was out. We all know why, right? I actually lower the bumper and pull the entire head lamp out. There are only 3 screws securing each lamp, 1 pop clip on each side bumper and 5 pop clips attaching it to the main frame. I remove these and the bumper lowers beautifully. I can then remove the head lamp, turn it over, pull the connector off, remove the rubber and attach the new bulb. It took about 5 minutes to replace both bulbs and about the same time to reattach the bumper. This has always worked well for me on all 3 of my vehicles. Not bad for a chick, eh?

Esta en español Por favor...

Great video! Thanks man!👍

Hi, my Toyota Camry 1999 model won't move while in drive. Could it be the same problem

I missed the part that shows you actually putting it back on.

Just the review I need. Thanks so much.

I have a 99 Toyota Camry and in heavy stop and go traffic in Baton Rouge this car’s RPM will drop and shut off. It doesn’t do it for any mechanic or anybody else but me in traffic. I changed everything related to air intake and fuel. So now I’m thinking it’s the camshaft. Did your car do this in heavy stop and go traffic?

"Straight Up" solution and demonstration...achieving a very useful serrated blade...thanks.

🙏🙏🙏💝🙏👍

Cat os catallic convertor buddy

I put selonoid from ebay but still sai not ready 3 week now

Maybe you need something like libinput-gestures? Most of the touchpad gestures never worked for me otherwise even on my laptop touchpad. Only ones that's supported are scrolling, zoom, tap, two finger tap, everything else i use libinput-gestures for.

Thank you for sharing a great video clip on how to install an alternator belt!

Hi, is it the same up top install on 2001 3 liter camry?

ty I don't wana lose my camry 1.8

All of today’s appliances and fixtures are rated out over 100 psi. So you could take it up to 80 psi. I like a lot of pressure when I take a shower.

Thanks bro 😊

Why can I not find videos about replacing the tensioner pulley of a 08 Toyota Yaris?

Vey helpful !!!

The machete cutting after was fairly impressive. Wish you would have had a before sharpening demo.

god

I replaced part and after 40 miles. It came back on. I reset it and see what happens. Has this happen to anyone else

Sorry, it was the camshaft sensor.

I used this video as a guide to replace my crankshaft sensor. My timing belt broke on my 99 Camry 4 cyl. Replaced timing belt and code P0340 with check engine came on. Repeatedly cleared codes, but code immediately came on instantaneous to clearing. Found crankshaft sensor to be really dirty. Cleaned, re-installed and code doesn’t come up. Hope the car continues without issues. I am unsure if I had this code prior to the timing belt breaking. There was a code but I did not check it. Thank you for posting this video!

I have to agree with all the positive comments; your lighting and attention to detail is commendable. Your calm demeanor is very welcome particulary in my case; I'm studying your video because despite ample pb overnite saturation the head of the lower bolt sheared off. I'm to the point where removing enough material from starter to isolate bolt or bolt small portion of starter, in order to remove inaccessible portion of lower bolt in tranaxle housing. Ironicall the upper bolt was fairly easy, as was the bottom. By the way I agree with disconnecting both battery terminals. Thanks for the great video video of this freskishly clean rig.

If u want stop cut💔 and bleding use gloves 😅😢🙏

get you hand out of the way

Great video

The Perixx 504 is for Windows only. It works very well on Win 10 & 11 from my experience. I was a bit disappointed that it didn't work on any of my Linux, but you can't help bad luck.

I’m slowly becoming a TH-cam mechanic hahaha

HI Jeremy my code is P0770 should I replace that solenoid you did?

🙏💝

This is great. I want to try making one now!

Is there a hole for the metal cylindrical part to go into or does it just snug tight?

Thanks for sharing this I have had a hell of a time trying to find where this was located I have a delayed shift issue where my transmission isn't timing properly and my rpms will climb and won't shift until I let off the accelerator.

the japanese hate’s mechanics

After changing the alternator it still has a whine. What is causing the whine if not the alternator

you are using the magic touchpad wrong. it has force touch and you have to keep it on a firm surface. also there are drivers for it. driver can turn off tap and use clicks like a mouse. once i got used to it, it was really great to use.

You need to read the instructions or watch the entire video buddy.

hi these are fab, I have been searching for a cross to make from natural materials, ideally the same wood as the original, but seeing yrs I think woulb be a better option. My question is if I cover costs obvs! would you be willing to send to UK I wouldn't necessarily want them strung as I bought some thin leather strings to use, I'm assuming they can be sent as airmail letter? Let me know if this u r willing to do this and how many you can send as cost efficeintly as poss inc. all costs, I will transfer by paypal if youn have it? btw they are going to be donated to a local hospice that provides end of life care, my son works there as a nurse and last year Husband climbed Kilimanjaro Mountain and raised over £10k for them, they have high st donation shops, that it would be a dream to mstock the crosses in, but my initial thought was to gift them to the clients at the hospice, let me know what you think. TIA here's the www of the charity; www.isabelhospice.org.uk/

Where can I get a template?

You did not remove the old bluing so it’s not going to work right

Thank you for sharing this experience....My 1998 Camry, 4 cylinder just showed the P0770 code with shift solenoid E problem... Your video is exactly what I need to watch....Your step by step instructions are so clear, and you made it so easy for me to follow....Thank you so much....Take care and have a great day.