- 21
- 292 464
4140Venci
Bulgaria
เข้าร่วมเมื่อ 15 พ.ย. 2009
Audi brake calliper replacement
In this video I'm replacing rear brake calliper on audi a8 d3.
มุมมอง: 970
วีดีโอ
Audi air strut disassembly
มุมมอง 29K3 ปีที่แล้ว
In this video I disassembled air strut of my audi a8 4e to repair air leak from upper bushing, I've used PU sealant to fix air leakage. in video you can see process of dissasemblying front air strut, montage and demontage, instruments used during the process.
Audi a8 d3 oil change
มุมมอง 14K3 ปีที่แล้ว
In this video I've show process of changing the oil, oil filter and air filter on Audi a8 d3 4,2, process is the same with 3.7 engine.
Xiaomi vacuum cleaner battery repair/cells replacement
มุมมอง 23K3 ปีที่แล้ว
In this video I'm completely replacing battery elements with new, welding new batteries with higher capacity using my diy spot welder. also you can see 3d model of battery case here www.thingiverse.com/thing:4710312
Spot welder, diy battery welder
มุมมอง 3933 ปีที่แล้ว
Spot welder is used for welding batteries in battery pack without heating cells with soldering ion and damaging cells.
diy camera slider
มุมมอง 1.2K3 ปีที่แล้ว
I've created this compact camera slider from 3d printer parts and 3d printed parts :) 3d files - here: www.thingiverse.com/thing:4816751
Y7 2019 tear down and display replacement.
มุมมอง 1104 ปีที่แล้ว
Y7 2019 screen replacement. In this video you can see display replacement on Huawei y7 2019 all moments and specific details in the process.
Huawei y6 2018 disassembly and restoration, lcd replacement.
มุมมอง 7634 ปีที่แล้ว
In this video I've replaced Huawei Y6 2018 LCD screen, and I've tried to show process of tear down, display replacement.
Audi a8 control arms bushings replacement
มุมมอง 34K4 ปีที่แล้ว
In this video I'm changing upper control arms bushings on audi a8 4e.
Motorola g6 disassembly and restoration
มุมมอง 1244 ปีที่แล้ว
Motorola g6 disassembly and restoration. Found this phone on a flee market fully smashed and decide it will be a good project for restoration.
Huawei mate 20 lite disassembly and restoration.
มุมมอง 1.4K4 ปีที่แล้ว
In this video you can see the process of disassembling and assembling the phone, changing the display and put all back together. one of the songs in the video: Zombie Rock by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0/) Artist: audionautix.com/
Thinkpad x200 with i5 520m disasembly and upgrade.
มุมมอง 9K4 ปีที่แล้ว
In this video i'm upgrading my old Thinkpad x200 laptop with x201 mainboard
Nokia 3.1 plus disassembly and restoration
มุมมอง 5K4 ปีที่แล้ว
In this video i'm restoring Nokia 3.1plus with broken display
Prestigio multipad 3508 tablet restoration
มุมมอง 6K5 ปีที่แล้ว
Prestigio multipad 3508 tablet restoration
Very interesting! What is the capacity of the capacitor?
1F audio capacitor
I have a Niato robot vacuum cleaner. The battery protector of the vacuum cleaner does not work. What is the solution?
Hello there I have a few urgent quesions. What nominal cell volt is roborock using ? 3.6 x 4 = 14.4v right? wont the ID on the BMS brick itself when you tear down? Does anyone know what max amp The board can handle? Can I use more batteries in paralell? I suppose other BMS boards cant be used when they lack ID/T support
*What nominal cell volt is roborock using ? 3.6 x 4 = 14.4v right? Charged - 4.2 x 4 = 16.8v *wont the ID on the BMS brick itself when you tear down? I haven't that issue. (only blown fuse) *Does anyone know what max amp The board can handle? In my opinion around 5A *Can I use more batteries in paralell? There no room for more batteries if idea is get more capacity use cells with high capacity * I suppose other BMS boards cant be used when they lack ID/T support No idea I've haven't tried .
I have faced with error 14 after changing all the batteries with the new ones. Is there any solution to this
According to Google Error 14: Problems with charging. The battery temperature is too high or too low. Wait until the battery temperature is normal.
Issue can be bms or temp sensor
@@chichovenci I have solved the problem. Before installing the renewed pack, I have tried to charge it by connecting it to my charger. Female connectors has expanded while doing this and when I connect it to robot socket, it didn't sense the battery. I changed the connector and now it is working.
friend, please tell me, does the plastic tube inside the oil filter housing have to stand motionless inside, or is it normal that it is hanging out there?
It moves abit
why mine just doesn't come up.. it feels like it was glued inside
I just bought a D3. Previous owner just did valve cover gaskets, but I still have what appears to be pretty good leaks on both sides, do you suppose it could be because the rubber washers on the bolts maybe weren't replaced?
A good amount of liqid gasket (silicone for engines) will help solve this issue, but you need to reassemble a gasket cover to apply it.
my audi have setup but i can t have in screen can you help me
Access green menu and activate needed features
@@chichovenci i have greem menu or mmi in my car.Do you have phone number if you have can you help me
@@chichovenci i have greem menu or mmi in my car.Do you have phone number if you have can you help me
@@chichovenci my car have green menu or mmi but i can t find how i need help if you have phone number tell me i send photo or i can call you
@@chichovenci i have green menu but i can t find how to activate setup
My vacuum died again and now i had 2 dead batterys laying around. Saw this and figured i might combine all good cells to make 1 good battery out of 2 dead ones. Was my first real soldering job i ever did but i did it and my vacuum works again. Thank you!
My mechanic charged me 5 hours to complete this job. I will get back to him and told that it`s actually 16 min. I feel robbed.
If there is a car lift and impact gun is around 2 hours.
Try 2x playback speed. 😂
bolts could have been siezed who knows what he came up against and both sides would be probly 5 hrs
Did someone know what is the name or number of the oil filter ?
Great job!
this video is cool i can see everything you doing to the strut assembly however, you don't mention the parts being disassembled. I would greatly appreciate it.
I've tried to show all the tools used during disassembly (it was a long time ago, and I don't remember all tools used during disassembly).
No problem i see that the inner part was the air bag cool. I see that it had a strut rather than a shock absorber, strut bushings, strut boot, upper control arm, the strut cap. All I know in those parts its all integrated. Just was doing a research for the difference. Its for the purpose of extended warranty. they definitely don't cover shocks but they do cover struts. Thanks again for your video sorry it was a while back but informative. Happy holidays!
Hello, what kind of soldering tool are you using? Do you have a video on how to build one?
th-cam.com/video/dtgocsUecHg/w-d-xo.htmlsi=ZiXmMXSVzh9-u9b1
So I don’t understand very well with this auxiliary heating . Can set up to heat your car in the morning without starting it??
That's the idea heater starting heating the cabin and engine and stops after the interval you choose 15, 30 .... min. It is not necessary to be around the car (car can be locked on the parking and process starting according to timers)
Buenas tardes! Alguien sabe porque puede ser que mi vacuum comenzó a funcionar lenta de un día al otro. La limpié toda, pero sigue lenta, hace unos días atrás iba mucho más rápido haciendo su limpieza, que podrá ser? Hace 10 meses que la tengo
nice to watch a professional at work when occupational safety has been taken care of in a maximum way. After all, nothing can happen when the jack was still very stable and in good quality for performing such work.
A new battery from Ali costs $20. Is there any point in repairing it?
Waiting two months for it...
Thanks. This is helpful!
Please inform rating of single cell.thanks & regards.
Original cells are lgabb41865 2600 mah
Thank you very much
Please inform can I use higher mah cell?
I've already done this. 2600>2900 mah
Please inform 2900 mah model no. Thanks & regards.
Hello, I have a question. My robot starts cleaning with 100% of battery left and the last 4-5 times when it arrives to 40% it dies suddently. Before when the battery percentage was low it returned to the dock in order to recharge itself and after that it starts again, but now it stops itself in the middle of the room without any voice message. Do you think that could be the battery pack that is damaged and it is necessary to replace it?
Definitely the some of the cells.
I've changed the battery with a new one, but robot doesn' t turn on and at the base the battery % is stuck at 1%. Any ideas?
dude, seriously i am impressed, this is hardcore DIY fixing <3 i pay respect
Это временный ремонт через полгода год элементы опять уйдут в разбаланс, тем более внутреннее сопротивления разные.
смотри мое другое видео ... cells replacemen ... там я заменил все елементи из батарея и она работает до сейчас ( у батарея xiaomi там еест плат баланса елементь )
Please tell MAH per cell?
Original cells are lgabb41865 2600 mah I've replaced all with Panasonic with 2900 mah not sure about exact model.
In fact, in the video, there are subtitles, so you can see the exact model of used batteries.
Thanks for the reply 👍
3400 Mah will work ?
If you replace all
Hi, greagt video. how many MAH Per cell? Thanks
"New one" should be the same specs as the other cells in pack
Thank you for this informative video. I have s5 max and do you think a regular 4s 20A bms works insteadof the original battery pcb? I see there are 4 cables. Two are plus and minus but I couldn't know the two other white and yellow one.
I'm not completely sure, but one of them should be battery temp ... but I haven't any idea about the other one. Try to repair the original board in my case, the issue was fuse located on the board. I've used fuse from donor board - laptop battery
Keep in mind that video is not tutorial it's just for getting an idea what's inside the vacuum cleaner....
Amazing
❤❤❤❤
Viomi Alpha UV(S9) remove all the main screws, on back of the robot vacuum, and then lift the lid from the front to access the battery, as per Xiaomi. Thank you.
Hi Sir, I would like to use 2800 mAh 5C lithiumion batterier (4s2p). is it convenient for xiaomi mi mop pro2+ robot?
Should work ...
Fantastic. However, We do not recommend DIY for wrapped battery packs, as the wrap is for heat installation, when charging. You can buy new battery packs, globally cheap from China for Xiaomi and Viomi brands. Thank you.
Mine has auxiliary heating, but I don't get that. How can I activate it?
Дополнительный подогрев который находится в ногах для задних пассажиров
I like work bro
❤❤
Nice work
If the complete battery pack gives the correct voltage, but, through the connector that goes to the vacuum cleaner (4 pins), it only gives approximately 7v - 8 volts, what do you advise me to check? The cells have just been replaced, the vacuum cleaner only turns on if it is in the base to be charged and the batteries are 100% charged at 4.2v
Check the fuse
Has anyone had problems with air spring causing rattle clunking noise while driving over pit holes
I have the same problem with air spring and its making rattle clunking noises. Do you know what is causing this kind of noises? Thank you for answering!
Same problem🤦🏽♂️
that noise is coming from your upper control arm bushings need to be replaced. Take a visual inspection of it.
Wheres the aux heating at tho , I don't see it on mine
The Aux heater is placed in the right fender
здравейте, май така е по-добре, коментирах, като сложа амортисьора стои под долната част, и не мога да си го наместя. и исках да попитам дали има някакъв метод да го направя. поздравления
if you'r trying to mount whole shock assembly on car ... (it's a bit jerky translation) remove air valve and it will be way easier to mount shock assembly on car.
but if you are trying to assemble air spring with bushing inside this is really difficult, I've used magnet (on flexible stick - don't know the English word for this tool) to put together bushing washer and in the end to tighten everything. In fact this is the hardest part (in my opinion).
First of all, thank you very much for answering and congratulations on your video, it is very helpful. If you look at minute 15 of your video, my air shock is just like yours, but I can't get the bottom zone in.
You need someone to help you with shock cable (to pull it from upside) and to give guidance about directions.
Hola necesito su consejo, no consigo meter amortiguador en la parte inferior
Bulgarian is my native language, be so kind to use at least English
Had my A8 serviced at the dealer till about 70,000 miles. I decided to do the next oil change. The filter was never changed by the dealer in all that time. A heat shield needs to be moved and creases after. It was never moved, and the oil filter was degraded when i fished it out. Guess they can't be bothered. Do it yourself!
That's why I'm doing it by myself.
@@chichovenci Great use of that concrete lift BTW. Back in the day, we used a couple of spare tires placed on the ground and a few bricks as a small ramp. Just drove up on the spares!
No
What did you use to remove it ? With regular bushing removal?
Thank you for detailed explanation! However, when opening the battery case, the component(likely AO4447A) below Thermal fuse(Sefuse D6x) got damaged and lost connection to the circuit board. Can I solder it to the board once again? Or can I replace it? Can you please guide me what can I do further? Your 3d model of battery case attached is very helpful , Thank you!!!
if fuse is "just unsoldered " ... check it with ohmmeter and if is still usable (operational) you can solder it to it's place. otherwise use compatible replacement.
aferin sana
amazing! im surprised theyve made it to be repairable where you can just change parts.
oh shit my new 05 was serviced by jiffy lube. lmao. can you imagine new guy looking for holes. lol.
What!? A real nightmare to change oil filter and to remove drain plug.. audi engineers did this awful!
Drain plug is piece of cake... but oil filter is like nuclear physics...
with that shitty weld that is a potential fire hazzard, burn down a whole house to save 50 bucks, lol