- 25
- 249 439
Tyler Barton
เข้าร่วมเมื่อ 16 ต.ค. 2011
Mini Cooper Headliner Removal and Replacement
This video will help you easily change your drooping headliner or just change it up with a new color.
You Will Need:
Flat Head Screw Driver:
amzn.to/3R8V90w
Phillips Head Screw Driver:
amzn.to/3R8V90w
Power Screw Driver:
amzn.to/3L7zB0H
Wire Brushes:
amzn.to/3LckGSG
Headliner Adhesive:
amzn.to/47X9ROt
Headliner Fabric:
amzn.to/3R3jLbc
You Will Need:
Flat Head Screw Driver:
amzn.to/3R8V90w
Phillips Head Screw Driver:
amzn.to/3R8V90w
Power Screw Driver:
amzn.to/3L7zB0H
Wire Brushes:
amzn.to/3LckGSG
Headliner Adhesive:
amzn.to/47X9ROt
Headliner Fabric:
amzn.to/3R3jLbc
มุมมอง: 29 580
วีดีโอ
Best upgrade for a Mini Cooper
มุมมอง 119K5 ปีที่แล้ว
Adding an auxiliary plug to your Gen 1 Mini Cooper. Fits R50, R52 and R53. Just plug in a Bluetooth receiver to give you Gen 1 Mini Bluetooth music and phone. You will need: T25 Screwdriver amzn.to/3R7Tvwa T40 Screwdriver amzn.to/3sFd4SD Drill amzn.to/45ZgHB3 1/4" Drill Bit amzn.to/45Dvzp3 1/16" Drill Bit amzn.to/45Dvzp3 Radio Adapter Cable: amzn.to/3R5AF9b Auxiliary Cable: amzn.to/3r4trYn Blue...
Honda Shadow Brake Master Cylinder Rebuild
มุมมอง 13K5 ปีที่แล้ว
Step by step guide to rebuilding the front brake master cylinder and bleeding the front brake What you will need: Master Cylinder Rebuild Kit: amzn.to/44DmGuo Phillips Head Screwdriver: amzn.to/3Lb4sJz Flat Head Screwdriver: amzn.to/3Lb4sJz Fluid Extractor: amzn.to/3P4tk6X 12mm Socket: amzn.to/3EtysNk 10mm Socket: amzn.to/3EtysNk #5 Socket: amzn.to/44Dm08k Snap Ring Plyers: amzn.to/3sJ3fTF Brak...
How to Remove the Front Wheel on a Motorcycle
มุมมอง 1.3K6 ปีที่แล้ว
How to video on removing the front wheel on a motorcycle. This video is on a Honda Shadow VT1100C but it is pretty much the same for every motorcycle.
Bose Ear Cup Replacement
มุมมอง 1046 ปีที่แล้ว
Step by step video on replacing the ear cups on Bose headphones. Works the same with QC 2/15/25, Ae2, and Ae2i.
96 Honda Shadow VT1100C Air Filter Replacement and Seat Removal
มุมมอง 17K7 ปีที่แล้ว
This is a how-to video on removing the seat and replacing the air filter
Most People Don't Know This Filter Exists!!
มุมมอง 727 ปีที่แล้ว
This is a how-to video on changing the cabin air filter on a 2013 Hyundai Sonata. However, the process is the same for most cars.
Amazing Peanut Butter Cups That are GOOD for you!
มุมมอง 107 ปีที่แล้ว
These peanut butter cups are very good and are actually good for you! They taste just like Reeses! Ingredients: 2 Scoops Shakeology 1/3 Cup Almond Milk 1/4 Cup Honey 2 tsp. Vanilla Organic Peanut Butter 1/2 Cup Dark Chocolate Chips
How to Build a $10 Steady Cam
มุมมอง 447 ปีที่แล้ว
How to video on building a homemade Steady Cam. All you need is: Old Tripod Leg Roller Blade Wheel Small Amount of Scrap Wood 8" 20mm Bolt 4 20mm Nuts 2 20mm Washers 2 Lag Bolts 2 Lag Bolt Nuts Some Large Washers for Weights Glue 2 Hose Clamps 3 Bearings All the material can be purchased at a local hardware store and cost around $10 Here is a link to the bearings I purchased www.amazon.com/Hear...
Beautiful Sunset Flight in Downtown Lynchburg
มุมมอง 1117 ปีที่แล้ว
Beautiful sunset drone flight over downtown Lynchburg and the James river Prelude No. 7 by Chris Zabriskie is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0/) Source: chriszabriskie.com/preludes/ Artist: chriszabriskie.com/
How to Rebuild Clutch Slave Cylinder on Honda Shadow
มุมมอง 19K7 ปีที่แล้ว
How to Rebuild Clutch Slave Cylinder on Honda Shadow
Best Cheap Tablet Mount Upgrade for DJI Phantom 3 Standard
มุมมอง 3K7 ปีที่แล้ว
Best Cheap Tablet Mount Upgrade for DJI Phantom 3 Standard
Christmas Flight in Florence Phantom 3 Standard
มุมมอง 217 ปีที่แล้ว
Christmas Flight in Florence Phantom 3 Standard
Great video but may I suggest informing the viewers of what tools will be needed for each job AKA The special clutch socket you use and a link to find it????
Wat wrench is that
I know this is an older video but I have a question for anyone here who has the knowledge to answer it. I purchased a Honda shadow same bike, had to do a lot of work to get it running and I go to take off and the bike will not move. I took apart everything in the video and ordered a socket to remove the nut. Now the bike is acting like the clutch is always ingaged. I think the plates are frozen together and that means with the socket on when I go to turn it to remove it just spins. What do I do please help
Hi, it could be something with your clutch slave cylinder or master cylinder. I had an issue where it was having similar troubles and it ended up being a combination of the slave cylinder and the clutch master cylinder needing to be rebuilt. I have both of those videos up on my channel. Hope it that helps!
@@ifly891 would that still apply for my situation? I have the new clutch and a slave cyld rebuild kit. I have everything taken apart but that nut holding it in. The pushrod itself is taken out too. How is the clutch still engaged
Nine times out of 10 the problem is the clutch and related parts. Everything has to be in order. If you want to do the work yourself, I recommend familiarizing yourself with the clutch system. Then take it apart and verify everything is in order. Most common cause would be the clutch slipped. Or the plate is off the assembly.
What is the diameter and size of the key you used to unscrew the clutch basket? translator
Anybody know where I can get a replacement for that clutch spring plate? I can't find it anywhere
Awesome video, really simplified the job by watching your video, the only thing for me was cleaning clutch case gasket surfaces, was very tedious. I noticed you didn't replace it, so did you use a gasket sealer that keeps the gasket intacked. I've had the covers off twice and replace it both times. Thanks again for a great tutorial.
Just use a L and the cover comes off easy no need to remove the kickstand bs
Wow it is amazing!!!
Hai brother i from Indonesia,i want ask size in your use cause i buy not original but equality...thx
Straight forward video, no chit chat in the beginning of the video. No wasting time
What is the appropriate name for the vent cover and where can I buy one?
Thanks for the video reference
Is it possible to take off the old textile and glue that back on? Because mine is perfect and not dirty at all, could I take off the old foam, glue it on and stick it back?
Not recommended, you need to used a foamed fabric. If you do as you wrote it won't fit well. Another tip is using a solvent to clean the roof before gluing the fabric.
What solvent did you use?@@Afmu
@@markthegrea universal solvent did the work
Just get a Bluetooth FM transmitter
Cannot for the life of me figure out how to pry the drivers side knee panel down. Need this in order to access the upper drivers side bolt holding the left pillar. Any suggestions??
Great Video! No talking just doing the work with no gaps in the video. Thanks for the instructions!
whats that socket after the lifter plate?
Hi, it's a special socket. Here is a link to one on ebay. www.ebay.com/itm/115562013534?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=nOfLgDXzT-q&sssrc=2349624&ssuid=3WDl4WOCQIK&var=&widget_ver=artemis&media=COPY
Hey man thank you for posting this video, I have a 94 Honda shadow that I need to do a clutch rebuild on and I couldn't find any videos of my generation shadow. Do you have a link where to buy the rebuild kit? Also will I still be able to get that nut off without getting it into 1st gear? I'am unable to get it into gear at all. Thanks again man 👍
Great video. I want to put the alcantara material on my 2013 and watching this gives me the confidence to tackle the job myself. Thanks for posting this.
What was the noticeable improvement? Break feel? Brake lever slack?
Very helpful.
How the hell did you "remove plate cover" at 3:06!?! If this is a how to video it's not a very good one!! You can't leave key points out!
Where did you get the parts?
Hi, I got it off ebay. Here is a kit that would work. www.ebay.com/itm/401344305789?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JrRin3IFTMq&sssrc=2349624&ssuid=3WDl4WOCQIK&var=&widget_ver=artemis&media=EMAIL
Where did you order your materials and upholstery?
What was the little tool you used to clean off the headliner before adding fabric ?
It was just a stiff bristle brush.
what year shadow was this done on?
It was a 1996 VT1100C
@@ifly891 Great job...helped me out a lot!!!
If only I could borrow that socket
I have done very similar with Woodbex plans designs.
This video is exceptional!! It's by far the easiest and most informative instructional video I've ever come across. I LOVE the fact that the instructor didn't waste his and my time spending half the video flapping his lips trying to explain what his video was going to show us what or how to do it. That's so annoying. It isn't like we won't be seeing what to do essentially.Thank you very much, Tyler Barton for taking the anticipation and anxiety out of what I thought would be a daunting task. A lot of people could learn how to do a video right from you.
Thanks a lot. We'll be trying in the next week or two. This vid helped me feel confident I could do it well.
I did this to my facelift r50 and now the aux option in my radio went missing leaving me with cd and fm only ):
Way late but look at bluetooth fm transmitters, work great in my r52 and it just pops into your cigarette lighter.
How much would this cost me to get done? I can’t do this myself
For people wondering how to get the cylinder out (he moves off camera when he gets it out), i used an air compressor to blow the cylinder out since it was stuck. Just be careful because the brake fluid aerosolizes when you do this, and can spray you EVERYWHERE. wear a respirator and some eye protection.
Rad! Looks like a simple enough job
Thanks for this video it will probably helps a lot of us, did you remember wich type of spray did you use for this?
Hi, yeah it was the 3M headliner adhesive spray.
@@ifly891 thanks mate!
@@dicappa.7298 seems 3M is the most recommended. I'll be using it as well.
Hi buddy nice video 😀 I have exactly the same bike with the same clutch problem, I woul like know where I can buy the replacement kit
Hi here is a link. There are a bunch of options on ebay for different kits that are all about the same. www.ebay.com/itm/HONDA-VT1100C-SHADOW-1992-1996-CLUTCH-SLAVE-CYLINDER-KIT-Made-In-Japan-/382885863174?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
@@ifly891 thanks man appreciate
Thanks man I was struggling with the rear view mirror, you made it all so simple .
I ordered my socket for a 1988 which mine is . An it’s to big do u think the one u used will fit the one I have is to big
This one should fit. www.ebay.com/itm/Honda-VT1100-Shadow-85-86-Clutch-Nut-Socket-Tool-/111586261943?hash=item19fb0f3bb7%3Ag%3A6wMAAOxyDoZSIhZb
I have a 97 and it's exactly the same
what tools is necesary?
Hey man great video..the kit you bought works on a 86 Shadow vt1100?
Do you remember what the dimensions of the material or where you ordered it from?
Here is the one I got www.amazon.com/dp/B06WP5WBXG/ref=cm_sw_r_cp_apa_fabc_ZVMB8FPRWWKNT9Z7R95X?_encoding=UTF8&psc=1 And then I just got the 3m headliner adhesive off Amazon
@@ifly891 Thanks so much!
I found it on Walmart.com For a bit cheaper.
You took all apart and drilled your car??and you didn’t changed stereo?? 🤦🤦🤦🤦🤣🤣🤣🤣 For 30$ on Amazon you can get nice stereo with Bluetooth, mp3, usb, SD card etc.... Sir congrats you are extreme idiot.
Haha thanks.... Sometimes people prefer the look of the factory setup. In my opinion, aftermarket radios do not look good and make the interior look cheap. . Especially $30 ones... But everyone can do what they want 😉
@@ifly891 So idiot
Thank you for your video. I have a mini r50 from 2001. there are things that are little different but it will be very helpful to restore my car . Have a nice day 😁
Thanks so much. Just bought a 2005 mini for $800. Needs work but help when you have videos like this. The right quarter window and back window were broken. That's $800 fix itself, but still worth the car's value.
This is a 1986 shadow right? I've had mine apart and back together 50 times now and I must be doing something wrong. Does your clutch diaphragm spring have pressure against the pack when you tighten the nut down? Mine you can spin with your fingers. I must be doing something wrong. Did your clutch work after this video?
Hi, It is actually for a 1996 shadow but it should be the same. There should be some pressure on the clutch spring. It worked well after the video. Is yours not working? If so, what is it doing?
Don't bother with this adapter, get a second hand or cheap head unit by a reputable brand and you'll transform it's system and add all sorts of features. The factory speakers are big for the size of the car, and had to be artificially restricted by the head unit to help sell the HK upgrade. This means it responds to a head unit upgrade on factory speakers better than any other car I've known.
Hi, can you please explain further and tell me the exact Items I should get. Thank you 👍🏾
I bought a model with an auxiliary port and Bluetooth already. It also has a USB port and 25 GB on board storage for media.
How do we know it Worked
He'll have another video to replace the gasket after it starts leaking
I thought you had a 1986 VT1100C in your other video? Lol Anyway, can you tell me where you got the rebuild kit?
Hi, I got it from ebay. Here is a similar kit www.ebay.com/itm/Honda-VT1100C-Shadow-1100-85-90-92-96-Clutch-Slave-Cylinder-Kit-/292796058127?_trksid=p2349624.m46890.l49292