วีดีโอ

Hello! Can I still use this mini fridge? It had a refrigerant leak and it was filled with R134A but the compressor is for R600a. The R134a leaked out and the leak has been repaired. Can I refill with R600 and use it? The compressor still turns on but got heated with the R134a exposure. Thank you, Elsy

Do I have to do that first and then take the gas and then remove it

🎉😊

Bro nobody can hear what you are saying because of the noise, not a single Word understood!!!

You don’t check your high side pressures when charging? And you could un braze the tubing instead of cutting off Have done over 1000 compressors that way

Thanks for video !!! very helpful.

Perez Cynthia Thompson Mary Anderson Amy

Thanks for letting us know 😃

Genius! I hit a wall trying to get the plastic to not strip. Thank you! However I did all this and put in a new motor but now it's not spinning fast and it keeps shutting off ! noooooooooooooooooooo (maybe bought a bad used motor)

134 copresser liter pls tell me

What year is this? I’m trying to figure out what mine is

Might as well replace the pulley and drum glides as well as the belt.

Excellent video

I have the same exact fridge same problem and there it was same thing bad board I looked every where in how to troubleshoot it finally found it little late but you’re right on the money thank you for sharing.

Great 😃 video good job

Thank you for the great directions! This 70 year old Grandmother was able to get her washer running again with your easy to follow instructions

This was so well explained. Thank you for saving me some money....and scoring a few points with my wife.

I have the Whirlpool WTW4900BW0 washing machine, sounds like a jet plane in the laundry room in the spin…

Thank you! Awesome video! I just fixed!

Nice work

your video is correct. I was told the wrong side of the belt on reddit

So to replace a bad r660a compressor with a 134a compressor. Doyou have to change anything else besides the dryer?

Bad video doesn't show him what he's doing inside

Thank you very much. God bless

I live in Long Beach and need to repair a Samsung fridge. Can you help me out?

Does that upgrade device come with the warranty compressor?

I had this compressor replaced bavk in January the fridge is not cooling the freezer is barely getting cold.a technician just left my house and told me the 3 way valve is clogged and its running high.the compressor is very hot to touch.he quoted me a price of 595 for parts and labor what do u recommend me doing there was a blinking red light on the control board yesterday i pressed the rest botton and it went away any advice i have spending huge amount of money every 6 months on those fridge

thanks for the video

Great video, what is the little clamp called that you added to be able to connect gauges and refrigerant?

Very helpful. Thank you for sharing this TH-cam, and your skills! I almost changed the clutch/transmission ($$$$) or the timer ($$$) but was not certain they were the problem. I did a little further search and found your TH-cam. So glad I did. Changing the lid switch ($) was say following your directions. Thank you again. Bonus: I am golden in the eyes of my wife! woot woot woot!

Model Nr is fking 795🤣🤣🤣

I made the same setup but trying to recover refrigerant compressor keeps locking up and trips the internal breaker. It can do vacuum perfectly goes to 30” and builds pressure over 450 psi. But when trying to recover refrigerant it shuts off.

Thank you so much for the video. great help

thank you very much sir for sharing your knowledge.

Thank you,worked like a champ!

This video was very helpful. After purchasing the lid switch from Amazon I was able to apply the part in less than 15 minutes by following this video step by step.

This video definitely help me I laid my completely over on the side while putting the motor back in

Excellent. Thank you

We have a similar Maytag which can only heat only for a few minutes. By watching your video and others, we are able to fix it by replacing the solenoids. Since it is 30 year old, learning how to replace igniter is very helpful Thanks a lot for your help!

You have a new follower. Great video. This was so helpful in fixing my own washer

Did you have to change the capillary tube or not by chance or you can use the same capillary tube that is use for the 134a

Do you have EPA license, how can you release the refrigerant in the air? It's illegal...................

Thank you so much

Please tell me if compressor is on warranty how long does it take to take old out put new in just labor and parts. What would this cost?😂

A few tips for anyone facing this problem on this fridge. All the screws are 1/4 inch hex The door is attached to the slides with 4 screws. Just loosen them up a turn and the door lifts off the slides, which makes the slides easy to work on If you remove the slide holder on the right hand side, the back panel will bend past the light and you can access the parts on the right side. Three screws hold the slide-holder in place. The light will hold the back out of the way. The fan cover has three tabs. Two near the top that push towards the center, and one on the bottom that pushes up. They're easy to break 😞 Fortunately the thing seems to stay in place with two of them broken. There's a foam baffle running midway across the back facing the coils. If the coils are frozen up, it might get stuck in the ice and break. Fortunately the adhesive is good, so it's easy to reattach the pieces. If you need to get the fridge cold while waiting on the parts to come in, you can judiciously use a heat gun to defrost the coils. You don't even need them completely clear. If you get about 2/3 of the way across then plenty of cold air will flow to the fridge. If there's a lot of ice, the catch pan under the fridge will overflow.

Thank you, any ideas what this service should cost typically?

Gracias este vídeo me sirvió mucho de ayuda

Great video

I wonder why you didn't show what you were doing when you evacuated the existing freon from the system. 🤔🤔

Amazing vid. Helped me all these years later. Thanks!