วีดีโอ

Did you try a magnet on both sides of the wheel?

Dejan de gastar dinero y tiempo en diseños que no funcionan ni pueden funcionar. Para hacer un motor magnético primero tienen que encontrar un material que permita hacer que el flujo magnético pase en un sentido y ni en el otro, esto es un DIODO MAGNETICO. Usen todo su dinero, tiempo e imaginación en investigar este tema, el que lo logre ganará mucho dinero, fama y resolverá el problema de la energía para la humanidad.

Dejan de gastar dinero y tiempo en diseños que no funcionan ni pueden funcionar. Para hacer un motor magnético primero tienen que encontrar un material que permita hacer que el flujo magnético pase en un sentido y no en el otro, esto es un DIODO MAGNETICO. Usen todo su dinero, tiempo e imaginación en investigar este tema, el que lo logre ganará mucho dinero, fama y resolverá el problema de la energía para la humanidad.

I ALSO HAD THIS IDEA IN A BRAINSTORM BUT FIGURED THAT THE ATTRACTION WOULD CAUSE A PROBLEM VS THIS SPINNING FOR EVER WITH LITTLE ENERGY TO START OR A CONSTANT LOW VOLT DC TO IT. MAYBE THIS PAIRED WITH A RHODIN COIL AND 1--300 MLV. ANYWAY SOMETHING THAT WOULD SYMCRONIZE/STABALIZE THE MAGNETIC FIELDS ,AND PRODUCE MORE ENERGY THAN BEING INPUT.

Здравствуйте ! Я думаю вам нужен сверхпроводник чтобы экранировать магнитное поле , тогда будет работать. Некоторые люди уже добились хорошие резултаты в этом проекте.

With this theory we can make free energy generator but need big magnet

Could you use magnetic shielding Pete ??? Just an idea fella

Podrías probar intercambiando los polos de los imanes.

Haz in péndulo con imanes. La gravedad podría dar esa parte de ña energía que falta para que se mueva por más tiempo. Primero puedes probar poniendo este círculo en forma vertical. Y con el iman abajo.

Missed all the wiring?

I think you have to make at the other side also a magnet.

Quais as dimensões e o n dos irmãs?

What about placing magnetic shielding where the resistance points are?

Spring load and cam lever . allow it to continue. Then ad #&*÷!#:*€

Show parabéns da p fazer a levitar com 3 imãs redondo do maior ao menor e um imã peão em cima

push and pull create an L shape (N)(S) as it spins it will pull and then push thats the schematic homie from across the pond

Dont use any attracting from the magnets. Only use the magnets to repel. Any magnets that attract to each other will cause it to stop and freeze.angle them so that they will not be able to face each other until its already going to pass it. like on a fan blade that when its going to passby or over it wil be going to fast to do anything but keep going

despite having watched you go through what ppl tested ages ago i still think its possible, better angles and self powered mechanisms are needed, better engineering..

no perpetomobile has ever worked.

Though it may be possible to get this type of set up to run contiguously (a magnetic mobile) it will never create excess (usable) energy. I would suggest the key to success would be replacing the disk with a heavy flywheel. The mass of the flywheel as kinetic mass may help overcome some of the cogging.

You should buy a 3D printer. you will not be disappointed, as long as you research which one to buy.

C MAL CONSTRUIT l'inclinaison dès sur le disque pas assez prononcé la roue doit avoir plus de poids... cette vidéo dénigre une vérité SA FONCTIONNE TRÈS BIEN BIEN MONTÉ

I suggest put the magnet at a steeper angle to the point where they only just meet end to end . Put the push magnet level with the disk and closer to the magnets on the disk place it lower .Maybe even put another push magnet on the opposite side .

Make 2 spinners same poles so they repel one right side up and one upside down. I created free energy when I was 5 years old thought I could create a space ship that didn’t need gas or fuel

Okay now can you remove the bigger magnet and check the number of revolution because of Inertia...it will behave like a fly wheel..just to compare.

Pra começar os externos devem extar alinhados com os internos no mesmo eixo longitudinal e centralizados no mesmo. Você os coloca lá em cima, sem nenhum alinhamento... aí fica difícil já de saída. E mais, é necessário tentar isolar todos os imãs deixando só a face de "empuxo" á mostra, Todos devem estar isolados dentro do possível. Penso num "motor" desses girando vários geradores de fluxo empilhados, todos num mesmo eixo vertical.

This is a good video but if the challenge is to be completed you need to place the magnets the way the other video had them. Yours were not in the correct placement. So I don’t feel your challenge was completed.

Along with the shielding mentioned in other comments, perhaps a Hallbach Array along with it for the outer magnets 🧲 could yield some interesting results.

Not for long.

Why dont you put a non magnetic object where the magnetic field cant travelf through to block the back end. So pretty much create a small window

Make the stable side magnet oscillate in and out in time with the tail of the magnets.

Why is much time and resources still being spent on this nonsense? Until there is understanding of how to 'selectively' re-gauge a permanent magnet's field, 'permanent magnet-only' motors will simply continue to be a waste of time and resources. But, fear not, thanks to the internet, there will be a continuous supply of ignorant individuals who will claim to have figured "IT" out and (gladly) continue to drain, not only their own pockets, but the pockets of crowd-funding patrons and suckers. I'm glad to see that this video made no claims.

the rotation should be increased by a small electric motor. when the revs drop, a small electric motor turns on. the power consumption of the motor should be lower than the current produced by the magnetic wheel. because perpetual motion does not exist.

Try using just 3 magnets on the spinner and hold the push magnet in your hand and moving your wrist up and down to notice how little wrist movement it takes to generate very high rates of spin..then design your holder to imitate your wrist movement by having the spinners centrifugal force carry a small magnet to move the push magnet up and down. Also even if it is not perpetual doesnt mean it's not useful. Imagine a actual bicycle wheel with this setup. Very little leg muscle to yield faster and easier pedaling. EVERYTHING IS IMPOSSIBLE ...UNTIL SOMEONE BELIEVES IT'S NOT. Case in point the ignition research facility at Livermore California. Good luck

How stupid

Remove some of the magnets on one side and use a non-magnetic counterbalance on the other side. You could use led or stainless for the counterweight.

the magnetic field is stopping me from thumbing up this video!

i built a practice unit or 2... found some interesting effort by crowding and not for a strong effect where they were crowded... and a ramping of speed,......

Why i left Christianity th-cam.com/video/I_btCVYm1IA/w-d-xo.htmlsi=QGcon4vNi3omCTUV And th-cam.com/video/SdyyNimjYCs/w-d-xo.htmlsi=vFbcuRhXeHww9yEf

You should also measure how many turns it would make with the same energy input without attached magnets (that adds weight). I’m pretty sure it will be even more or same, so magnets do not add anything

The elastic trigger is big deal. And there isn’t any gain in rotations. As expected. Nice execution. Maybe the pseudo scientists will get the point Perhaps brass screws holding the magnets

Remove the stationary magnet. Make a spring loaded pusher so that the input is repeatable. Then time the freewheeling spin. Bring back the stationary magnet, using the same spring loaded impulse see if it’s longer or shorter runtime.

Try putting the three outer magnets in an arrangement that allows them to rotate away from the disc one by one. Two of the three magnets are not acting on the magnets on the disc at any one time while one magnet simply rotates past the disc causing a push action on the disc based magnets. The setup will require a pulley or gear wheel on each external magnet and three pulleys or gears on the post that holds the disc. You will have to move your bearing to the base of the post instead of on the disc. A string or chain arrangement will join the central post and external magnets.

It's impossible for Nikola Tesla too but his fans John, Lucas, Marcus and Mathew posted his wonders into the internet 70 years later anyways.

What about putting all the magnets on the wheel as negative but the magnets on the stands as positive? Also maybe have longer magnets on the wheel so the plus is nearer the middle and therefore have less effect of pulling it back?

Bro instead make that fixed position into rotaing then the disk will rotate in opposite direction

What if you put a fixed magnet inside like the one outside, but all the other magnets that rotate, so these will be arranged with the magnet outside so that they are repelled, I don't know if I understood, que tal si pones un iman dentro fijo como el q esta afuera, pero todos los demas imanes que giren, asi estos se pondran ordenar con el iman d fuera para q sean repelidos, no se si me di a entender,

Don't suppose you know the rating of the magnets you're using? Would help alot..

I've been trying to get something like that going for 40 years and I still haven't come close. The true force you can never get over on earth is gravity, so a mechanism needs you use gravity as well to propell it, I think.

5:05 just turn on or off the the STATIONARY MAGNET 🧲 AT THE RIGHT TIME 🤯... The magnet wheel 🛞 should produce just enough ⚡ electrical juice with the 90% spin and then turned on or off the STATIONARY MAGNET 🧲... Or just simply INCREASE THE POWER of the STATIONARY MAGNET 🧲 with an electric ⚡ jolt at the RIGHT TIME to push the magnet wheel 🛞 ... Then repeat 🔁