วีดีโอ

Will this cause rough running and open loop faults? 2016 RR S/C with P054C.

Good job 👏👏💯. Nice and clean 😊

Think I ordered the wrong belt

Thanks your video helps a lot but thats the dumbest engineering ever seen by dumb bmw german engineers.

Video not bad, music sucks. What makes u think most dyi like rap.

I grind the bracket down a little so that the tool could fully rotate and no need to remove the bolts holding the bracket in place. I used this $3 grind bit with my cheap drill (DEWALT DWA4974 Aluminum Oxide 3/4" x 1-1/4" Hp Grinding Pt)

Definitely would recommend a 17mm Allen socket

It shouldnt be this hard if so called engineer has a common sense to put a belt tensioner or adjustment. This is such a pain in the a

Páresen. De mentiras. Todos. Lol. Que. Risa.

How can i contact you?

Hi, where is that phaser screen for no SC engine?

How long did it take you to do this job from start to finish? We have the first one at work and due to having to order the timing tool it feels like the job is taking way too long to finish.

Short and sweet!!!

❤❤❤❤

How many rotations to get to top dead center mine has a jumping chain and I can seem to line my cam sprockets up

What size socket 😊

It's a damn shame the amount of work it takes and the amount of parts you have to remove when doing work on these modern engines.

I remember when I had to do a timing chain on the Lincoln LS 2001. Man that AC bracket was a pain in the ass. Bit after sitting there and observing for a while I made a easier way to remove it. And those two pumps on each side were kind of hard to but I got it all done. Same platform.

You just convinced me to just scrap out my 98 XJ8. I’m not dropping that kind of cash on any car!😭

Anyone else in CALI does this type of work… ON JAGUARS lol a lot of people are scared to even go near them. I would do it myself but I don’t have the required space nor tools :/

Hey Marc, where do you work in southern Cal, I have a 2013 Jaguar XF 3.0 S/C, 68,000 miles with either a blown head gasket or a cylinder three fuel injector that needs to be replaced. These are the two diagnosis I received by two separate mechanics here in Thousand Oaks, CA. Wondering if you’re nearby to me and if so if you can look at the car and give me a quote on the repair?

Have you done this on a 2015 ML350? Is it pretty much same thing or are those much more complicated?

Light bulb moment when you said the V8 has screens on the oil source to the phasers that gunk up with poor quality oil. I am having intermittent “restricted performance” on a 2013 5.0L LR4. The interesting thing is that sometimes it shows the bank 2 exhaust and sometimes the bank 2 intake as being out of phase on GAP tool. I bought the vehicle after the chains were allegedly replaced and it went about 3k miles before the light popped up. I replaced the camshaft sensors and error resumed, so it’s not the sensors. Tried the same with the vvt solenoid on the exhaust, but that didn’t do anything either. It comes and goes, and the engine WAS idling rough but it hasn’t since I put seafoam in the crank. My hunch is the oil in there is 1- old, 2- low quality. Will do a liquid moly engine flush and put revanol oil in it after in hopes it’ll clear it up. Is there a way I can check timing with the GAP tool? I think it would not be intermittent if the timing skipped/jumped.

How many miles or km did it get ? I have to diagnose mine properly but I think one head gasket broke at 254k km. Im gonna do the job, just love that car so much

I took my turbos out now I’m confused which one goes where lol. Are the oil return lines made for one specific side? Or universal?

Did you put a new alternator and was that the over charging issue ?

How much does a job like this cost for a 2009 w204 c300 ?

Crankshaft key way which direction is facing

excellent work man :)

Great video

I have a question! For the Mercedes 2013 timing tensioner, onece i put it back how do I get it to pup out

Wow

Buen video, gracias por compartir tus conocimientos!!!

how much a job like that cost

What was the total Maitenance hours on this job and price for the labor and parts?🫠 I might need to do this with my jag🤦🏽‍♂️

What size is the wrench to hold the cam and the torx?

What did you charge for this repair? I have the same car and need it done.

Can you leave the filter out for the non supercharged ones. I have done it with other vvt vehicles especially higher mileage ones.

Hasn’t worked for me I have to same tool. Every time I try it the ac pulley goes the other direction that the belt is going.

good video i have a question ?

Got my belt on sat in the groves but soon as i start engine up belt jumps off any idea ive cleaned pullies ect but wont stay on

Awesome video. Thanks for taking the time to make it!

Where did you get the parts?

Performed this job but car is still leaking any advice?

I'm trying to put the cam locks in but on the passenger side the intake phaser looks like it has slipped as the timing mark does not line up with the mark on the phaser and the cam is about 20° off. How do I get the lock in? Do I have to remove the timing chain from that phaser and move the cam back into position to insert the lock? Or do I have to just take the phaser off and turn the cam back into position and insert the lock?

no take out the bolt then use a metric 7 over the ac compressor turn both and the belt goes on no problem your way make it way harder...

VW 2017

VW

What size of wrench do you use?? Thanks

Very easy because of that beautiful garage