วีดีโอ

@datnotme9921 thank you for stopping by Hillbilly Garage we hope you check out everything we have going on in the garage

Thank you, it's fun sharing what I do with ya'll. We appreciate you for hanging out with us regular.

@heathszenasi5617 Thank you, appreciate you stopping by to visit Hillbilly Garage. We hope you check out everything else we got going on in the shop.

@chuckwhitson654 YES! I chuck 7 or 8 pipe cleaners and a piece of mechanics wire, between my vice and drill. Twist them up pretty tight. With it still in the drill, run it in and out the oil passages with brake clean. Thank you for great advice. Thank you for visiting Hillbilly Garage, please keep stopping by.

@Hillbillygarage1215 well I figured that you would. Alot of younger cats wont think hard on that

@chuckwhitson654 I try to be as thorough as I can cleaning stuff as I go. Especially oil passages, I use oven cleaner, Purple Power, Simple Green, Dawn dish soap, brake clean and pressure washer to get every nook and cranny I can get too.

@jimclarke1108 Thank you for visiting with us here at Hillbilly Garage we look forward to you visiting regular.

Thank you for stopping in and visiting Hillbilly Garage. Hope to see you back regular.

It has been a pretty long time since I did this job. I do not remember the code "number" but the description on my code reader was "misfire cylinder #8". That is all I can remember, sorry.

AMEN Brother! Thank you for your Service! Appreciate you visiting Hillbilly Garage please keep coming back regular.

Thank you, I have tried a couple different options trying to avoid paying a bunch of money for the pans that straddle the bottom leg. This idea just seems to be easier and less expensive yet better in a couple ways. Thank you for visiting with us here at Hillbilly Garage we hope too see you often.

It would be nice if I had them warmed up but it's always stone cold so far. It still helps break it up and I go right over the paint as well. I usually use a needle scaler to knock off loose paint during the cleaning process.

Thank you for visiting Hillbilly Garage

@phillipthethird42 that is what we like to hear. Thank you for tuning in regular.

@Hillbillygarage1215 Just goes to show ya that no matter how old I get, I can still learn something new.

@phillipthethird42 I hope to learn something everyday.

@CommanderAndThief thank you I like doing it this way, I get a sense of accomplishment from it and I thinks it's cool to see my reflection in it. Thanks for visiting Hillbilly Garage please check out the rest of the channel and see how we do it here.

@krisdrinkwine6045 yeh, if you get into them before they spin bearings, they can be revived and run great and be lots of fun for a really long time. Thank you for visiting with us here at Hillbilly Garage. Check out the rest of what all we got going on.

@RonRussell-sj1zf it's kinda rough on the shoulders, but I really get a kick out of how they look when I'm done. Thank you for stopping by Hillbilly Garage. Keep coming back, we will be bringing a video on Magnum cam bearings very soon.

@peted5217 thank you for the tip, keep visiting Hillbilly Garage and check out all we have going on.

@@shitindawoodsbear2798 I spray the driveway off with the pressure washer into the stone around the driveway. It helps keep the weeds from growing up in the stone.

@shitindawoodsbear2798 Thank you for visiting Hillbilly Garage please keep coming around to visit.

@poogy3 Thank you for stopping by Hillbilly Garage please keep visiting

@sherwinstaudt1881 Too funny, thank you stopping in to Hillbilly Garage and we hope you keep coming back. Tell all your friends!

I measure afterwards and adjust bearings if need be.

Appreciate you visiting Hillbilly Garage please keep checking in with us.

Yes, I am really looking forward to getting this one on the run stand to get it fired up and hear it roar! Thank you for visiting Hillbilly Garage

Yes, as long as there ain't no severe scratches they usually clean up real nice without removing much material

Thank you for stopping by Hillbilly Garage hope you check out the rest of the channel.

Thank you, it's pretty satisfying to see the final shine. We appreciate you visiting with us. Please check out the rest of the channel and keep coming back.

I use Brake clean from WalMart and Rural King and I have good results from them. I don't care for most stuff from that channel you mentioned. A lot of what is said seems SUS to me. LOL Thank you for checking out Hillbilly Garage please keep coming back.

@williesweetjr8713 thank you for visiting regular

@@TerryChesney-z9u we really appreciate you stopping by regularly

It sure does thank you for turning in, please keep coming back

@leonardrose-fq8me Wow, this old trick is REALLY old huh? Still works pretty good. Thank you for visiting Hillbilly Garage please keep coming back

@joshchilds1473 that's good with me cause I'm "old school" Thanks for dropping in to Hillbilly Garage we hope you check out all the old school stuff we have going on

@jerryrigsit5400 yes, it works pretty good. Thank you for visiting Hillbilly Garage. We hope you check out everything we have going on currently and in the future.

Definitely worth the stop, Nice people, good food and Bigfoot stickers. How could it get any better. Thank you for riding along with us, please keeping visiting to see how this build goes.

@victorvaldez6684 yep one in the video is a 305. I like reviving a bunch of different engines. Got some MOPARS in the shop now. Stop in and check out what's going on

I'm gonna look for that and try it out. Maybe it will be a good pre-treat or something. Thanks for stopping by Hillbilly Garage

I use wire wheels and rolloc disks for cleaning gasket surfaces

@robertduran1945 well I guess if you knock a few pounds of grime off, it might make more power? LOL Definitely run a degree or two cooler, so you might gain there? Thank you for visiting with us please keep coming back and see what all is going on at Hillbilly Garage

@vyeronicavanwallegham6586 I'm glad you came by to visit. I hope you keep coming back. If you have advice/suggestions, I would like to know how you get things done.

I'm a little older so it makes me a little slower. Thank you for stopping in to Hillbilly Garage. Keep coming back and see what all we got going on here.

@@Doober12082 I have another set of heads I'm gonna work on soon. I plan on cutting the next ones a bit more. I don't have access to a flow bench but they will be better than when they started.

Charles' video series on the heads is very in depth, he does small cuts/blends and measures the differences. He cut the vane down a LOT to get those numbers, and the head was something like 250cc+ by the time he was done.

@shaunwells4173 thats cool, thank you for visiting please keep coming back and check out all that we have going on at Hillbilly Garage

@alleghenyextracts5988 fumeless doesn't cut as good but it helps to do it outside. Thank you for visiting Hillbilly Garage please keep checking in

@phillipthethird42 yes, this winter has started off bigger and colder than the past several years and covering more of the south than normal

I know you're right. Keep visiting Hillbilly Garage to see our efforts to revive a few good power plants

@vernonharvell5620 good tip, thank you. Also thanks for visiting Hillbilly Garage please keep checking in and see what all we got going on.

Yes, I did have two different engines going on in this video. I have rolled the miles back on several engines so far you can check out the full videos at Hillbilly Garage to see how they progress. Thank you

Because you can totally tell the difference between a 305 and a 350 in this video. Yea 2 different motors, but how t f are you guessing on displacement.....

Everything is a conspiracy theory these days 😂😂🎉

You can't tell the difference between a 305 and a 350 from this video only reason you noticed was he went from working on 84 plus heads to working on pre tbi style heads and intake

You noticed the difference in the crank shaft/ shaft's. Joker 😂