วีดีโอ

I'm disappointed

Trolling motor

I love my little Taurus 856 Ulta Light. It is the perfect pocket gun. It's safe, reliable and looks pretty cool. I have the FDE color one.

You have no right to worry about other people's problems Keep up the good work . Enjoy life have fun with the machine . I take my swimming . Working on a pond ..😅

Good information, will unload my used trencher today,just purchased

I love mine! I’ve had it about six years. -added a thumb…. Yes, I did have to reweld one of the out riggers after working outside of its weight class. It has more than paid for itself. I use it with a MucTruck and can get into areas that I could never access with a full sized machine. We cut and clear a lot of riding trails through the woods. I did break one of the hydraulic lines, but it was my fault. It caught on a limb while I was towing it. Getting ready to use it on the back of a John Deere tractor. I’ll upgrade the hitch to a 2”. My only complaint is that the hydraulic dipstick would not fully seat when I first got it. Harbor Freight sent me a replacement very quickly.

Absolutely Brilliant 👍🏾👍🏾👍🏾doing mine soon as scupper arrives👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾🙏🏽🙏🏽🙏🏽

Did you use minimal expansion foam

Nice mods! 👍 some good ideas there

Just like people breaking screw drivers as pry bars

Appreciate the video! I like the rod hold modifications and will implement them on my bass raider. Thanks for sharing!!

I definitely like the rod holder attached to the seats. I'll be looking forward to watching your drainage plug video. Great job looks awesome 👍🏾💯

Very very well thought out, great job!

2:10. Biden, or any President, has nothing to do with corporate greed. Pitiful.

I've had one of those unloaders on my trailer for awhile now and it works great. If you put a cheap plastic tarp under it, you will have a clean trailer when you're done!

For one thing your analogy is wrong. This is a mini Excavator Cheap at best yet if you have hard ground it's not the best

You said made in Japan. I'm rushing to the store first thing in the morning.

I like the modification. but I wonder it might have been easier to use a removable pin secured with a cotter pit. Yes, another part to lose, but it does handle the ramp shifting and eliminates the welding work.

Seperinya tidak terlalu berat mesin nya bos

A set of 22x11-10 high load 4ply atv tires on 10x10 4on4 lug rims really helps on uneven/muddy/soft ground to reduce wheel sinking and getting stuck

until the grass that the tires flatten pops up.....

I have a power Kraft towable so far 75 foot water line and 250 feet of leach lines a burn pit several other projects love mine I am 92 and it is so easy to use.

Great video. Just ordered mine from HF and before it arrives I wanted to find someone who has owned one for more than a year like yourself who could shed some light on important mods that may need doing from the get go. Really appreciate the feedback.

Too late on the patent, I've been using that parts cleaner for years except mine is is an orange bucket with Dawn soap and HOT water, or not.

It's also cheaper to make the part out of hollow round stock and welding a cap on the end than machining an end cap out of solid round bar stock, or not.

It's mostly keeping dirt from going in... Or not.

Heck no , of it works with a pin in it just leave it and save the money. If you already have a welder and enjoy it like myself I might take the time to reweld it just for fun unless it keeps breaking them I would just leave it. Thanks for the video.

I think they welded the end caps to make it easier to install the cotter pins. I don't think the pins needed replacement or it would hurt to run with the old pins as long as the cotter pins are in place.

Great point about the cotter key actually keeps the whole pin together. A thought I've had about doing to mine... Drilling a small centered bore hole through the pin and only halfway into the pin, then drill the same size hole at the center point of the pin, but only drill it halfway through to where it will meet up with centered bore hole. Then tap the centered bore hole just enough to thread in a grease fitting into it. Being able to grease the pin that way will allow the grease to thoroughly lubricate the moving parts of the pin. And, it will make it way easier to grease that joint because it sure is aggravating to reach the grease fitting through the joint at the top of the boom. And, I love your new parts washer. 😂

I replaced all three of my main pins. I just re-welded my old pins for backup. If you’ve seen any of my older videos, I broke multiple pins because my hydraulic ram was egg shaped inside. Enjoy your videos!

Love it😂. That parts washer is awesome, please, please forward the pattern as soon as possible. Lol...... have a great day

LOL…every time I watch one of your videos, I chuckle a lot. You have such a way of presenting, and that voice? It’s great! The new “invention” of the “parts washer” cinched it for me. 😂So many times it puts me in mind of Mr. Haney, from the old Green Acres tv show. (He, and Hank Kimball were my favorites!😂) If they’d ever do a remake of the show, you could be the new Haney-I think you could do it…LOL 😅 l love your videos on the trencher-always good information, suggestions, questions, etc. If…I can ever get caught up with so many other things I’m having to work on, I’ll be looking to make some of your improvements to mine…looking forward to more. 😊

Great sense of humor 😂!

I don't see why the welds are necessary other than keys coming out. Replace the keys every year or two. I like latch pins myself but cotter pins come out harder and are very hard steel. Haven't had one come loose but I will watch for them every startup.

I bought this safe from my uncle years ago and have been trying to find the serial number on it. Does yours have a label located anywhere? Also, what kind of batteries does it take?

I hate having heatstroke for lunch.

Hang on to the pins packed with mud. Let them soak for a long time in hot/warm water and then try to blow them out with air compressor.

On any heavy-duty equipment, grease all fittings at the end of the job or at the end of the day while everything is still warm. To force all the accumulated water, dirt, and grit out of the joint or bearing and to do a good grease job. You don't need to force a lot of grease out, just enough to see clean grease. Wipe excess off with a rag, it will hold the dirt and grit you want to get rid of.

I need land! I want to be like Henry when I grow up... darnit.. I'm 60

I've been a fan of these machines for a long time but I've never been able to justify buying one. I enjoyed your video very much! The TH-cam machine suggested your video for me tonight and I subscribed. I like your style and wish I could give you more than one thumbs up.

Guess What? Today $499. 😅

I'msorry you "lost" the video. That's a bummer; for both of us. I would have liked to see a guy wrestling with all those pins and joints. I put my trencher together by myself, and it took a fair amount of both strength and ingenuity. I would have liked to see a potentially, better way of manipulating everything. At any rate, this is a good video. Thanks for sharing it.

And the Oscar award goes to Henry for all his informative and interesting videos. Keep up the great work for all us hf trencher owners. I also ordered pins and thought 3 would be good, replace 1 and 2 for spares. Well I got 6 new pins. You are right, it's a great little machine. Have a great day

I’m sure that corrupt video was probably one of ur best🤣😂

I later realized the pins with broken welds couldn't spin independently because of cotter pins!🤣 Also the other video was "corrupted", according to my computer.😁

Put a bigger hydraulic pump on it and it’s faster and better… but I have a design that will keep the front on the ground and less of a chance of it coming up… but I’m not telling you my design…

Poor man’s backhoe …. The only reason I would buy one is to mount it to a tractor and skip the 7-10,000 dollar one for the tractor… just upgrade what you need to mount and use it on a tractor will still be cheaper than buying 7-10 grand for one…

Those crappy balancers don't work. Completely garbage.

Thanks for making this video

I hope you learned how to aim a camera better so what you are Tring show on the video is in view so everone knows what you are talking about !