วีดีโอ

What fork oil did you use

Hey thank you for this! I have 06 250cr with gnarly/powercore 2 and vforce reeds. It runs great and doesnt bog down at all BUT i have stock jetting on. Whats your opinion what way should i go with jets or just leave them? IT runs great no problems on/off/on throtling picks up great etc. Maybe little detonations on low rpm (needle jet Area) on Deacleration. Add. Detonation is only way i can deacribe it with my Limited english haha 🤣 like like punch before it should bang. Doesnt do it on every roation just like 1-2 times before Idle.

Thank you for this video

Is it normal to have a tiny whole in the bottom of the crankcase for oil/blowby to purposely leak out? My crankcase has a tiny whole where just a small bit of oil drips out when the bike is running more or less. I just bought this bike, and like yours mine has been somewhat neglected/abused, but physically and cosmetically not nearly as bad as your bike was. A project bike it will be lol. Ty

Great idea about the foam at the front of the intake did not know that the air would circulate from other areas ,will be getting this done 👍

Our place is just North of Tomahawk. I'm about to ride it on my new to me 300 xcw. Had to throw my old boots in the trash. It was hard. I guess it's time to get a new pair. I do like the new knee pad shin guards i have. Looking forward to riding! Not looking forward to breaking in new boots but gota do it!

I just bought the S&B pumper. Game changer for us. I have been scared to get it wet; glad to hear that it is safe to get wet. Hope you are still getting good performance after a few years now.

Being the only one out gives you no reason to abuse the laws.

I have used these for years, they have saved me a few times, Trees do not move!! I won't ride the woods without them.

Great I already bought it. My hands severely painfully fall asleep. And was praying this will help. Thanks for the heads up! Great vid and info!! Hopefully it needs to go through a little break in period!! 😢

How many times did you guys bang in there🤣🤣🤣🤣😇😇😇😇🫠🫠🫠🫠

Do you know if you can pair 2 of them ?

Very helpful to see those. Thanks. Cycra doesn't appear to care to explain anything about their handguards.

Do you think end of September would be to cold to visit ? Was hoping to see the fall foliage

I have a rm80 and need help with a carburetor

just picked up a 02 rm85 and its not in that bad of shape but now i wanna do this to it

How much was the total cost in parts?

I hope you don’t take this as an insult, but man with my eyes closed, you sound exactly like Dana white. I want this size box for the front of my xt1000r outlander. Cheers dude.

Those trails are practically paved... I wouldn't expect to feel a difference.

Fasst Flex Bars might be a better option, they come in many different bends/sweep and also have different durometer. I used them on a buzzy thumper, quite effective but didn’t totally eliminate vibration. Fasst also do good Bar end dampeners if you want to spend less

My friend just put one on his krx it took thirty minutes and a beer brake 😂

Thanks really good video

I know I’m late but I just stumbled upon your video and I can definitely use a set up like that for 2023 maverick x3. Are you still able to get a discounted price on that setup?

Thanks for being honest

To bad you didn’t do a before and after video. Other then that great video 👍

Nice bike! I’ve got the opportunity to buy a 2022 300rX for a killer price but I’m not a motorcrosser. I’m researching on whether it would be worth it make some suspension changes, power valve changes/ adjustments, 18” rear wheel, etc. can a 300 RX be made into single track, trail bike? I’m not really a racer just an enthusiast. Thanks

Hey boss did your sound system go on safety mode ?

Last time I was in BRF was February 1984 on a JDX8 Snowmobile.

My wife and I stop offroading or boating from 5pm friday until daybreak on monday because of the drunks and newbies acting and driving like ASSHOLES!

I thought it was illegal in Wisconsin to have posession of liquor "in an offroad vehicle"?

Does the battery cover still fit on after the battery is installed??

Hey, my name is Darcy I bought one just like you did and I couldn’t figure out what that plate was in that silver piece you take that black piece of steel the three holes in it and you put it on the inside of the box and if you look at the bottom of your box, there is two little holes where they want you to drill through you take that silver piece that strange silver hooky piece and you pointed front towards the front and you screw it in and you get a hole there on your rig that when you set the box down, you push it forward and it hooks into that one hole then you pushed the front box down and you latch the two left and right corners it’s a crappy system, but it does work

Awesome so I see it's been bout 3 years how do you like them now?

What’s the first cover for ??? 6:22??

So they still use metal frames? I thought the frame was supposed to be high density plastic

so in this video there’s a bridge you were standing on where is this is it right by long cliff falls where you were at??

Do you still use the helmet pumper? If yes how’s it doing after 2 more years?

Don't know what it does but I know it makes power

How much do you spend on this bike I'm trying to buy 2003 rm 85 and I'm planning to rebuild like u did

THIS MAY BE HELPFUL: th-cam.com/video/tHxNSHb0J5k/w-d-xo.html

Did the feel improve over time or no ?

Will a rear windshields fit with that center bar?

I know this is a couple years old but what model X3 are you running and what year? The reason I ask it there is a big difference in horsepower stock depending on what you have which a tune would make a huge difference. For example all 2017 model were 154 HP. 2018 base model was 120 and the turbo R was 172. Newer ones like the 2021, The base X3 DS Turbo puts out a respectable 120 hp, and the DS Turbo R ups that to 172 hp. The X3 X DS Turbo RR has a bigger turbo and beefier pistons and puts out 195 hp. I have a 2018 XDS turbo R that stock puts out 172hp. I changed the pressure on my waste gate to 8 instread of 6 and it now runs right at 16 psi of boost VS 14. Based on everything I've read that should be around 192-195HP. it is a beast and will smoke the 32" SuperATV Warrior tires I'm running like crazy... So much fun.👍 Awesome video by the way.

I have an 02 CR250R. Just rebuilt the top end and the motor hesitates at about 3/4 throttle and doesn’t want to climb… not a crisp clean acceleration all through the rpm band. Bottom end power is great. Could it be due to me putting the power valve back together incorrectly when I rebuilt it?

nice pressure wash and some degreaser and looks like she'll be mint!

It’s funny different tastes he doesn’t personally like the look. I actually prefer Cycra guards on vs no guards and bare handles.

Sir. I will buy that Rockford Fosgate system right now if you still have the contact. Send me his info please.

Nice vid! How has this bumper held up? Do you recall the weight offhand?

Great vid man, thanks for your work