วีดีโอ

Very good... thank you...

Great video. Will probably check out the TP-Link Omada APs

Hi, can you get a notification when motion is detected and view the camera feed?

doesn’t have that on gen 1

How would you setup access to a computer on the local network you're connecting to through the openvpn so you can access a shared folder? or will it just automatically be available by navigating to either the PC name or by it's IP address i.e. \\LTS-fileshare\

muito obrigado

I have 3 ubiquiti unifi 6 ceiling mounts in my house I used the second 2 as wall mounts as they are hid and don’t care wat they looked like .. because the wall mounts in unifi 6 were discontinued and the WiFi 7 were twice the price so that’s why I used the ceiling mounts on the walls they do the same job .. but I wanted to change the names on the units actually only one in particular the one upstairs in the music studio.. I just want to rename it UPSTAIRS STUDIO.. so do I have to download the ubiquity app to access wat you are doing here .. thanks my friend you have some great information on your channel is much appreciated thanks my man and cheers from Ireland 🇮🇪.. 👍👍

can you export a current cloud key setup into this without having to reset and re-addopt all pieces of hardware?

Can you assign multiple devices to each entry? I'm going to set this up as a gate access intercom at a personal residence and want the directory to show: Main House, Guest House and Shop, each of which will have an access viewer, but I'd love it if it also pushed a notification to the owners iphone Access app, so if a delivery arrives when he is not home, he can answer it through the app and open the gate. Is that possible? (So when someone pushed Main House, it would simultaneously ring the main house access viewer and the owners access app on mobile)

Great video! One question for you. Are your Hikvision cameras directly connected to a unifi POE switch? Or are they still being run through a Hikvision NVR? Thanks in advance!

Subscribed, great video, easy to follow, thanks!

Hello. Do you know if this amp will support Tidal Connect? Or just Spotify? It look nice, but I think if some features will not be available, the Wiim Amp Pro will beat it in almost every situation. Thanks!

perfect, thanks :)

Thanks for the video. So helpful! Can you point me in the direction of a video that explains how I can mesh across multiple WAPs. I have 3 WAPs in my house and I would like devices (phones) to jump across points as I move through the house. Is this possible? Thanks again…

dream rootah

Will this link to Spotify and play?

Hi great video. With your phone demo does the phone needs to be on the same network as the door access? Or can the phone connect to other private network and just have internet access to login to Unifi account?

Great video. Ubiquiti needs to fix the issue with requiring door attendants to be admins. This is an obvious oversight on their part.

For commercial use my hope is they'll come out with a 70v version.

What does it do can you explain please

Thank you, with my Reolink camera I had to navigate to the camera's Reolink ui via IP: Settings > Network > Advanced > server Settings > I had to enable http and onvif. Then it showed up like magic :D The same quality as a Ubiquiti £150 for £40 from Reolink :D I did buy their cloud key 2 + ... so they still got my money :D

I think it's as good start, looks nice enough, but lacks in features as others have commented. In this price range it would also be nice to see some bass management for the sub out, a high pass filter at least.

Thanks so much! This had all the info I needed, including that annoying notifcation thing. Really appreciate it

Gave this a go and it took 3 hours to install for the first time. You would think Yale would make it easy to install. But not they make it difficult so you pay an expert to come in and install it. Once set up its working perfectly now. Found putting the barrel in difficult and all the screws and juggling it to match up and fit.

What gage wire are you using to connect all the electrical connections?

How to connect if your TV don't have Ethernet space?

Can the access point be two floors up and connected wirelessly?

Excellent video thanks easy to follow and well explained. Ill stick with VPN!

Does this model have a cloud storage via the app? I have seen this under a Which? Best Buy and they state it does, but other publications say not. Thanks.

I have a question. Can you use face and/or animal recognition of the AI Pro to inform the Unify system that it doesn’t need to send notifications in the app? For example, when I’m working in my garden, it could recognize that it’s me and not send a gazillion messages every time I move, like my G4 Pro does. The same goes for our dogs/ chickens in the garden.

Great overview!! I just ordered one :D Any idea what the antenna beam form is on these or from experience how they do if mounted higher? If I mounted one at chest height would it give me any issues with coverage for things on a desk etc? Trying to get above some furniture in a home and I have wall access but not ceiling access. I'm pretty experienced with Unifi stuff just haven't used one of these.

How does management of the AMP work after initial install? Can I control what users have access to it? What if someone steps onto the network with the app, can they hijack the amp or is it locked to authorized users after install?

This is exactly why a video can be completely misleading, out of the box the U6+ is configured with 40MHz channel width on 5 GHz band, I know that for sure because I have installed a few, I bet the others are on the 80MHz spectrum, and that is exactly why you have the difference in speeds.

I'm currently running 1 AI Pro, 1 AI bullet, G4 Doorbell Pro POE, and 5 G5 Bullets with one of them monitoring the garage. After my fence is erected. I'll plan on expanding the system in the future.

Can the users be managed (NFC, PIN, Token) without using Ubiquiti Identity Enterprise?

For this VLAN TAG - you took this at random ?

how i can go back to bypass mode without login ?!!??!?!

I wish they had a setup for intercom system. I work in education and I'd love to replace our existing dinosaur intercom system with one powered by Unify

This amp is garbage for the price, use Bluesound Powernode, Denon Home. Sonos is garbage as well. .. I'm an audio file custom integrator I tried this amp once it was horrible I had to return it and went back to my blue sound. The rest of the network is running ubiquities so I thought I'd give this amp a try the sound quality is garbage.

awesome news !

If you need to reconfigure often, keystone. Otherwise use punch down. Punch down has lower insertion losses, and easier and quicker to install.

My intercom is connected to the camera via cable. I m connected to the intercom via wifi. Basically i m not connected to the camera. This method is then not working for me since you use ip adress of the camera which is not in my network. In other hand this rtsp method works for hikvision dvr connecting to different cameras from vlc for me. Both my dvr and intercom connected to same router, and camera intercom to intercom by rj45 (as i said). Is there a way to add intercom camera to dvr for recording. And dvr cameras to intercom display for displaying them or am i obliged to connect intercom camera to same router Thank you very much

Thanks for your review- just ordered 4 of these to replace my very troublesome arlo cams

Have you had a chance to look at the 2K AI Bullet ? The plastic UI use sometimes can discolour, like most do, but it doesn't deteriorate and remains solid long term. I've had a couple of G3 bullets in full sun for a few years. The plastic did discolour a bit, but was always solid and not physically deteriorated. As a note, all Protect cameras in the G4 and G5 range with a microphone do the audio detection. I have G5 Flex's that do it. It depends how you have it configured in the Protect UI as to how long it needs to go for. In the Protect UI it shows it as an alarm symbol now, not sure if that was the same 3 months ago. If it goes for long enough to just not be a nuisance alarm or a quick test it works reliably and very well. I am guessing you didn't let your alarm go for long enough that first time when it went off. I had to let mine go for about 10 seconds before it would pick it up each time. Your smoke alarm uses the temporal tones that the Protect system picks up. I am in Australia and never had an issue with it detecting the smoke alarm testing, but I do have to let it run for at least 10 seconds. I think the issue may be you are not letting the alarms go off long enough

Have you tried this recently? I used those settings with an AX11000. No joy. I’m suspecting the DOH used by Win11 bypasses it all.

Thank you for the review! though i do have a question if you dont mind? does unifi g4 instant camera compatible with amazon alexa? TIA

can you import users with existing cards? Or do you have to make each one every time?

Thanks for the video. Very helpful. I like the ease of use of the AirCube plus it has PoE options.

so with this connection, you have both wifi and ethernet?

The US doesn't have a "standard" sound for smoke alarms. I've heard ones that sound just like yours, though.