วีดีโอ

Super filmik 💪👍

I'm going to make one for my SA233. Question - Why not use Swivel Casters on all 4 wheels?

Thank you, Jaybird I made my dollie after watching your video and “DYI My Way” video. I have Yanmar 324 10.5” clearance. Had to use Harbor Freight 5” wheels like yours. I couldn’t put a 2x10 under the backhoe, so I put 2x8 to the outside of the backhoe. Front ant back. Creating a notch for the backhoe bucket on the front and a notch for the outriggers on the back. Easy to line up dollie under tractor. Thank you very much. My life just got easier

That must have been a christian tree! It built it self on the rock. If you know what I mean. Very nice tractor.

As if removing a stump with a small tractor isn't already a pain let's throw in some massive rocks right in the way lol.

What tooth bar and thumb are you running?

try a tire to pull up

With a couple pulleys and a tail hold setup you can get 4x pulling power, I keep notes on this in my truck since FIL showed me. Well you rock, thanks Jay. Interested in the same model. I used my Dodge Cummins last time I did this work.

Turn up your volume. at 100% still cant hear you.

Another thing I have done is fill the hole with water and let sit a while . Also the pull of the back hoe is stronger than the tractor pull . Just some of my experience. Enjoyed your Video. I have the exact same Tractor setup

Get a Sierra Blaster and bust those rocks up, Fun❗

Nice job rigging! I probably wouldn't have thought of that trick, despite having all that rigging in my off-road truck. I'll remember it now; good video!

Check Hinomoto HM255 a great Tractor 2022, with Yanmar engine

I have a SA324 and love it. I used your basic design for my backhoe dolly. Bought my wheels from Amazon a good bit cheaper than HF, easy to move around and it works really well. Good job!

If you will turn your phone sideways it takes a much better shot of what you filming instead of up and down. Great video too. I have a 2015 SA424 TLB I bought in 2016 and I love, love, love it.

Great video. I have one of those in the works as well, just for a smaller backhoe.

Solid video. Own the exact same set up. I’ve learned to never underestimate the 424. It never ceases to amaze me. Love it. Backhoe is a must in my opinion.

Thanks for posting.The Yanmar SA series tractors are really very capable machines. You get a lot of tractor for the money and you can't beat the 10 year warranty.

It's good to see ya back on TH-cam. I thought I was gonna see a new SIM driving rig. Lol

Thanks for the great video. I have been waiting 8 weeks for my BXpanded and now after watching I have decided to build my own.

Hey Jaybird, I have the same tractor and am building the same dolly. What was your measurement between the 4x6's and the measurement of the 2x10'S?

Where did u get the bucket teeth I have same tractor and would like to get a set for mine. Thanks.

THANK YOU!

Hello, I had that problem too. It is a defective MosFet that causes the error. This is an approx. 5x5mm large component, which has 8 Pins. Usually it is near the loading exit - mostly. The best is looking for discoloration or damage to such components. The type designation is printed on the black body. After replacing, the charger will work again! Has worked with all my defective chargers!

I see this is 2yrs old but hope you see this I lucky have a ace hardware close by only ones that carry those products Im making all my crawlers cage and frame and other parts with same way brazing and all all welds are strong and it way cheaper and looks better than store bought parts

Same problem ;) as me

So by installing the castle bec can i now use 3s lipo? Im only been using 2s i dont wanna fry my esc.

What's bec mean??

Very informative, thank you!!!

Well done. I have been looking for an option like this. Any plans to record the process in action soon? Be good to see you heat it up and such. No flux involved?

Thumbs Up!! Great video and thanks for the lesson on BEC... More videos on this rig please. Cheers!!

Dude! thank you SOOOO much for making this video, i just got my CC BEC today(exact one you show) and i was confused on where to plug things in and what to remove. i watched 3 other vid's and all they did was confuse me even further. Its always better when someone with common sense explains things in plain english. Great Video again.

man i was wondering what was wrong with my rc..thank you so much for the help..i just had to sub your channel to keep myself informed. peace.

Quick heads up .. I have the same receiver ( for dx4s ) and you should plug into bind port ( also batt port ) because if you have it plugged into aux 2 and acidently shut that channel off bec will go off..!

I have a SCX10 and I was to run 11.1v. Do I need a BEC to do this? I also bought a Hitec HS625MG servo (apparently they are not power hungry). But anyway, to run 11.1v on a stock SCX10, will I blow up the stock ESC? Is that something I need to change or will a BEC help?

Sorry. I should throw up a vid of the finished product. The finished TJ will be for sale soon!

any update on the truck? nice tutorial..... i'm waiting for a new video..

Yes, a BEC will definitely help your electronics with accessory items in use!

Will a bec help as i have the ae-2 esc,stock servo, 10 leds and a winch running from my 2s lipo. Thanks

had the same problem with my stock servo so looks like I need to go get a BEC let ask this I upgraded to a novak eiger which has a 3 amp built in bec do you think that'll take care of the problem as I'm waiting for it to arrive?? thanks for the info

I think yes since the bec will allow you to do so

can you run 3s lipo by installing that bec on stock axial esc

They have a pretty simple process online. You'll have to check with their tech support center to request an RM a. Print the RMA and put it in the box when you ship it back, and they will automatically credit your account the money. The bad thing is that you do not get the refund back to your PayPal or credit card, you only get it as credit towards future Hobby King purchases.

That doesn't work either, tried everything. Charger is a P.O.S.

Running into the same problem jkabee. I have 4 chargers and 3 out of 4 do this. I tried all different cables and configurations. I even tried plugging battery into it first. What does it take to return these to HK after you email them a video or photos? Thanks

Not it. This thing had issues Tim. Anyway, it had been returned and I have my refund.

you must plug in the battery first then power up the charger!!

I have returned the charger to HobbyKing and am waiting for my refund.

Not yet. I have an open ticket wit HobbyKing technical support. The reason for the video is that they wanted me to send "evidence" of the issue. Surely they know this is a common issue though, because I've seen others comment with the same problem. Thanks for posting!