วีดีโอ

LOL !! There are not many hi-tech products out there that do not interface to a computer !! The consolation is that the computer is only needed for servicing, updating and for a home studio interface !! After that, no computer needed for performing ...

Glad I could be of help!! Thanks for watching

I do have it on my computer in my studio ... how can I best get it to you ??

You can use the write command to copy/paste and re-arrange memories, but it may be somewhat tedious ... You can absolutely do this on a computer, using file explorers or the RC600 Editor program ...

Wow I just saw this message now, it's been 11 days ... I'm sure you've solved it by now, what I would do is just pull the power plug and force a shutdown ... Depending on what happens when powering up again, will determine the next steps ...

You are very welcome!! Thanks for watching & for commenting !!!

It now randomly worked, but sometimes it stopped at 64, sometimes at 32 bars. Maybe it's simply "too busy", It showed that message a lot with this song.

I will look into this, it is possible that the 32 measure storage was involving a stereo take, and reached a limit sooner ?? I have not experimented with duration limitations during a bounce. .. With the full songs I did work with, they were short songs & I did not count to know how many measures ... Sorry, I will have to look into it

Thank you for watching & commenting and for subscribing !! I do like to hear back if my efforts were worthwhile !!

@@the_michaelsphere Nice. Of course - I'll get in touch - when I get into looper and SY a bit. It takes some time and patience. I signed up with you on Facebook, and it's a cool group. So, see you soon and thanks again

I will add - because it is important. It is fashionable to speak quickly now, in Poland we call it word-flow - and it is good in many light topics. However, updating the firmware is responsible, because an error later costs time and money and the trouble of sending the equipment to the service. That happened to me 10 years ago - when I updated the software in a guitar processor for over $1000 - and suddenly the power went out. In the whole area. Although the equipment was under warranty - it died - and the importer's service in Poland did not help - they sent the equipment to Denmark _ TC electronics. There they replaced some integrated circuit - and it cost me 20% of the equipment's value - time, trouble, and stress. Since then, when upgrading, I connect the equipment to a UPS. This gives me some chance for uninterrupted operation. So your precise, unhurried and maybe non-commercial - haha ​​- in the form of instructions - is the best and provided in an ideal form. Great!!!!

@@AZZA9012 Wow I'm sorry that happened for you ... I will stress the importance of this in a future video ... If any interruption or power outage happens while updating system firmware, you will very possibly be unable to recover the machine, no mater what Machine it is, they are all similar this way ... what we call this is the machine is 'Bricked' - meaning unrepairable by anyone other than manufacturer... Only the factory can can fix it, and will take very long time to get it back, if at all, and will cost a lot. I may try to make a more 'generic' video next time, that can apply to any/all hardware, as the process is usually very similar... Cheers, my friend !!

Thanks for watching!!!

Just updated the replacement unit to V 1.40. So far, so good.

I would love to hear you explain midi connection with the rc600! I'm about to buy a GX100 too and I would absolutely love to learn more about connecting configurations between them both!

Thanks for watching !! I have many more videos to make & hope some of those are helpful as well !!

Midi is a big topic and seems very daunting at first, until you know what Midi can & can't do. .. Cheers to you & thanks for watching !!!

Hey there!! I probably cautioned against the version WITHOUT the 4K printed on the front ... it should not be updated with the 4K firmware ... If your camera does say 4K then you are good to update !! But, it only improves the Webcam function, as far as I know ...

You're welcome and thanks for watching !!

You're welcome! Thanks for watching !!

You're welcome & thank you so much for watching!!

Thank you for watching and for subscribing !! I know this machine comes with a giant learning curve, but the initial confusion is the worst part ... it gets easier !!

The built in drums exist outside of the tracks, and so will not be part of the fade out. You could however, capture those drums along with the bounced tracks during the capture process, but then you should include yet another Assign to 'shut off' th drums once the bounced track starts ... otherwise you'd maybe have the common issue of having a part being played from two sources, and would sum up to be much louder that expected ... By doing this, the drums are now part of the fade out track & all would be able to fade out together !!

LOL !! We've all been there with this machine!! It's so involved that we'll be in discovery mode well into the 2030's !! I suspect that the CEO of Boss has put every effort into ensuring that this machine would be his 'gift' to the world of music before he retired .. He seems to have seen to it that nearly everything is possible somehow with this looper ... But with that comes a hurdle that can seem impossible ... we have an incredible amount of experimenting & learning to do ... and even have to re-think how we loop in general !! What is currently seen by many as a faulty & flawed machine, is slowly being proven to be largely human error and wrong approach to the problems we've seen... There's no way around it, we'll all need to dig in & do lots of homework to 'get' this machine ... Don't give up on it, Cheers!!

You're welcome!

You're very welcome!! I'm happy you've found my channel hope I can make many more videos soon!!! Thanks for watching...

You're welcome!

You're welcome!! Thanks for tuning in & hopefully I can get back in my studios very soon & continue with some way-overdue new videos!!

I have a video showing how to do a Partial Backup and I think you'll find all the info you're looking for there ... search my channel for 'Partial Backup' ... or browse the Videos list & you should find it there !! It's an easy process, once you've seen how. .. I'll try to make more videos to elaborate on variations of processes ...

@@the_michaelsphere there is supposed to be a way of having it show up as a six channel interface in your DAW of choice

@@jimorgain63 Yes ... after downloading & installing the appropriate drivers & software to your computer, go in the RC's USB submenu, switch to 'Vendor' mode. Re-boot the RC & connect the USB cable to the computer. (There may be some setup required in Mac settings) Open the DAW and in it's setup/config menus, there should be something allowing you to select the RC for input/output ... It does get involved and some more advanced configuration may be required... You might look into making an 'Aggregate Device' if you're using a Mac ...

Thank you! Very happy you've found my page helpful, thanks for watching !!

Glad you've found my page!! Thanks for watching

So glad you've found my channel helpful !! Please stay tuned for loads more hopefully useful content on the way !!!

You're so welcome! Please stay tuned for lots more content coming soon !!

Thank you so much for your positive feedback!! I may need to relocate my studio again, as the space next to mine has been taken over by some loud rock bands, and they've been rehearsing almost every evening. I've been unable to find time suitable for my purposes ...

Thank you so much for feedback!! I have hit a snag, in that a handful very loud rock bands have moved into the rehearsal studio next to mine, leaving me almost no time suitable to make my videos ... I may once again need to relocate ...

Hi there & sorry for slow response ... Absolutely I will continue with many more videos, hopefully soon. A very loud band has occupied the studio next to mine, and they leave very little time to work on new videos, as they rehease almost constantly .. I may need to relocate, or just hope for time when they are not around. Sadly, my current studio is one of many within a band rehearsal facility ... it was a good option at the time but has become almost worthless for my purposes. ..

@@the_michaelsphere thnx

Thank you so much!! Glad it was helpful, and looks like you are doing an excellant job as well !!

I've been testing cameras with shorter focal ranges and various lighting setups to get a clearer closup without losing resolution .. this setup did not acheive the best results .. apologies !!

If you can capture a video of this, and post it to our FB Group, you will likely have a good chance at finding the cause & resolving this issue ... Link to the group is in the descriptiion ...

@@the_michaelsphere thanx Michael

Thank you so much !! I always worry maybe I need more action, less talking ... I do like feedback like this !!

You're welccome ! Thanks for watching !!

Hi & thanks for watching!! If I am understanding correctly, you wish to have a different set of Fx become active for each track, when they are played back? I believe yes, this is possible, at least partially, using Assigns behind the scenes ... There would be some difficult obsticles and limitations, however ... and likely might require external effects chains and/or midi-capable MultiFx processors alongside the RC . .

Vous êtes les ! bienvenus

Wow Thank you so much!! I am very happy if someone finds my efforts helpful & worthwhile!! Maybe I should keep at it !!

Merci d'avoir regardé !! Je sais que Traduire est un excellent outil et ne fonctionne correctement que si l'on parle de cette façon... la plupart des gens se dépêchent et parlent trop vite et ne peuvent pas être traduits correctement. J’apprécie beaucoup votre contribution ! Merci!! M.

Mode 3 will likely change everything, but I have to first address the many requests for examples, sounds and demonstrations of what I have so far ... so I will re-arrange my setup for this purpose for the next few videos ... then resume with the next mode ... Thanks so much for watching !!

I would absolutely advise using two dual footswitches, it can add loads of options !! Boss makes FS6, FS7, or you could use FS5u's instead. .. and move them apart!! And absolutely, using the CurrentTrack setup this way opens up all kinds of extra functionality ... If you're new with it tho, I might advise first learning lots of basics before committing to this kind of setup ...

Thanks for watching!! I know, I am well overdue for showing off some playing & sampkes of all this stuff... it is coming in the next few videos !!

Yes ... The program design team is looking to cover all the bases and be a true All Encompassing editor !! Well worth the $$ !!

This 'Small Beast' of a machine has so many possible configurations and uses available to it, no multi-instrumentalist or solo performer should be without one (or two) !!

Once any configuration adjustments are made, or whenever you've recorded any tracks you wish to keep for future use ... then you should always save the memory !!