วีดีโอ

Wurde das mit aktiviertem LNA gemessen? Ich bekomme mit den gleichen Einstellungen keine so niedrigen Rauschpegel.

Thanks for your help Best video

Nice and green there Max.

Looks like a great ride out there, great day for it. It’s a nice area. 73 de ZL1TN

Well this wasn’t helpful at all

hello. What the method of 10ghz signal generation you use?

Great shots Harry, looks like you were Johnny on the spot.

whats the conclusion

The apparent resolution of 0.1 dB is due to the fact that the value shown is the result of the average AVER4. Note that both the SI4468 on the ultra and the SI4432 on the tinySA have a resolution of 0.5 dB in their measurements.

So anyone figured out what part is causing the issue? I’m experiencing the high idle (1500rpm) randomly now after it hit 8000 miles. Thanks

Has anybody the electronic schematic of this oscilloscope? please share.

Just put on averaging, 4 or 16 or inf., anf you will have 0.1dBm tolerances at even wide spans..

Thanks for the insights. Automatic frequency correction could be a possible firmware upgrade 🙂 Entering the known frequency and connecting it to the input. I have a cheap GPSDO and OCXO modules laying around I need to look into. Those are 10MHz. You use a harmonic? 1GHz is 100x 10MHz. That is an even number, and a square wave would have odd number harmonics. Would that be a intermodulation mix harmonic then? And does it matter if you have done the frequency correction on that 10MHz signal instead? Cheers!

Ultra mode is disabled by default but can be enabled using the command CONFIG/MORE/ENABLE ULTRA using 4321 as the unlock code

Love that AM gear !! Must get me zc1s running. 73s Darryl ZL1TRW

We have the same things going on the 10m Band. It looks if somebody is tuning over the band. On 29 Mhz it´s every day here in DL. 73´s

2.40 Yo Kazza

Hey, if i remove the tyre and do the same you did and install the new tyre the same way with the ties it will work?

Glad I saw this. Somehow it reminds me of a rivet. Rubber rivets! Hmmm

these things work and they hold, with quite literally hundreds of miles on the tire post plug (real life experience). It prob wasn't the smartest idea, but it looks safe from how it's constructed. i would still definitely use rubber cement and not rely on tire pressure alone to keep it in place

I wish I could actually see what he is doing below the screen.

We never saw him air it up and spray the hole (or spit test, if water isn't handy) to test the seal, so we don't really know if it works.

Please don’t plug a motorcycle tire unless it is to just get you home and if you do use the old style plug kit you will get on the road much faster.

It takes a lot less work and a lot less time to use a regular tire plug. Ream the hole, add lubricant to the plug, insert and pull out. Done!! And a heck of a lot cheaper !

That seems great for emergency use. I don't think I'd trust it for long term use though. Especially on Z rated tires. I like it though!

Unlock code for ultra is, 4321

Its just a money grab

4321

Bạn làm video đến cb 1100 rất tốt mong bạn hãy làm thêm vài video về cb 1100 nữa cho mọi người cùng làm

Why don't you use the included antenna ? Is the 10 gHz transmitter so powerful that there is a risk of damaging the TinySA Ultra if you connect the antenna ?

I m sorry what does it show?

How did you add the delay to the horn?

I thought the tyny only reached 5.4 Gigahertz in unlocked mode, how did you manage to measure 10 GHz?

Just saw my VC Valiant..Awesome place!!!!

Fantastic thankyou from Aussie & Kiwi amazing experience

Just tried your home made tire balance method on my 2013 cb1100 and it worked like a charm. nice vid by the way

Opciolem my lep masakra

Awesome!

Wow! Tjats a great video! I like the sound of birds and trafic in the background!

It can be set up to actually show you the impedance of an unknown piece of coaxial cable. I use it to sort my 10 ohm, 12 ohm and 17 ohm cables. I even found that some cable I removed in an industrial setting was 93 ohm. A great instrument. I have several, just yesterday I received the liteVNA64 and it rocks.

That is a 10.525ghz traffic radar Gunn oscillator

Why would you have 10ghz emitters? What are those good for?

Wonder if throttle position sensor (TPS) left unplugged would trick the rev/speed limiter to get all the power available.

i fuckin hate silent movies!!!!!!!!

That's pretty cool, I will try the same thing with one of my Gunns, thanks.

TinySA Ultra on 3cm has 30dB lower sensitivity but... it works! Awesome. See my clip trough GHz's th-cam.com/video/lBfrPPQkpLQ/w-d-xo.html

Great job Max, simple straight to the point. How about a video explaining how to put the Ultra up to 10GHz? I have a bunch of these 10.535 horns I'd like to test. Mike Couture

Where did you bought this microwave sensor(transmitter)?

🤣Emirates Team Nz💪

How do you get up to 10Ghz? The specification says it can go up to 6Ghz? Very cool!