วีดีโอ

It's better than the previews version of Creality Nozzle, but it's not really quick swap as the FlashForge 5M series and Bambu Lab A1 series

Yes we have a version for K1/K1C and another version for K1 Max. You can find it at www.inventorsgarage.store/

Yeh, some times it is needed, but in most of cases we can print without brim to have a better finishing on models

@@InventorsGarage In the cases where it’s necessary, I’d like to find a better method of removal. Aka, for a clean edge, I’ve had difficulty multiple times getting “just the brim” off. I had Creality’s slicer apply brim (default, turned it off) where I didn’t need it and the couple of prints it did it too I’m still dealing with…

No need for that even, if you can handle the flow rate set inner walls to be wider, no need for extra walls. 0.64 works nicely from most modern printers. 0.8 is possible with some print heads and cht nozzles. I also often do infill thicker lines as well outer walls and top layers are standard width for quality.

Yeh, it's not perfect I know, but maybe you are using a bad filament brand, or you just need a calibration, take a look at this video th-cam.com/video/n2yPfGsvPmY/w-d-xo.html&lc=UgxkezzyB5h0TQ8xDT14AaABAg hope it can help you

Hi! Yes, the K1 MFS Project fits perfectly in the K1C 🤗

As I said, X1C, P1S, P1P or even an A1 worth the investment and save your time when using it to make money with 3D Print. P1S is so good as X1C.

Well actually any smart devices including a simple smart lamp can scan your network or even provide hidden backdoors to allow people connecting to your network, the only way to be really safe if not to connect to your main network, in my case I have a dedicated wi-fi AP only for 3D printers, all of them doesn't matter the brand or if it is open source or proprietary. I never had any problem, but prevention is always better than regrets ;)

You must have a SD card inserted so timelapse will be record inside it

@@Dozr24 what makes you say this? curious to know as I'm in the market to buy a few printers soon.

He's saying buy it. It's more reliable and more convenient than any other non-Bambu printer out there. He also says if you can't spend the $1,400, then get the P1S or the A1 with AMS which gives you the same capabilities for less money.

@@Dozr24 no it isn't. That's pure BS. Every part of the Bambu printer is replaceable, and some of them will fail by the 6k mark, but that's a year and a half of printing all day, every day (500 days @ 12 hours per day). You wish you could get that out of any other printer other than a Prusa which costs more for the same thing.

Even with the same model there are different calibrations, I have this video th-cam.com/video/n2yPfGsvPmY/w-d-xo.html about making calibration using Creality Print 4, but the principles are basically the same. The only point is, if you want to run detailed calibrations on Bambu Printers you will need to do it on Orca Slicer, because Bambu Studio hide most useful calibration options. ;)

@@InventorsGarage Thanks

Chris, it will depend on the prices of your local stores, it can vary a lot depending on the country you are or even the state of big countries like US.

I think you fell for it :D

Or you could say "Don't Waste Time," assuming he wasn't just click-bait trolling us.

I believe it's not about the language, it's about culture. As I'm not living in US I don't have the daily experience of getting common expressions meanings, and it's normal, even in Brazil we have different interpretations depending on where you live, but as I growth here I know intuitively what not to use in some situations. Thank you @ThisisDD for your feedback.

@Immolate62 I'm not intended to click-bait, my intention was really to say "You'll not waste your time using it" in a short way, but it didn't work of course LOL

@@InventorsGarage for sure it is a fine point that makes a big difference in interpretation. No worries though. I'm a friend to the channel and love what you do.

Yes, the only think you have to do is buying more acrylic sheets to fully close the SE case, otherwise all the heat will scape instead passing through the filaments.

Yes, sorry by my bad english LOL, I'm improving it everyday to produce better contents ;)

Yes, and it's easy like a charm, look at this video th-cam.com/video/n2yPfGsvPmY/w-d-xo.html&lc=UgxkezzyB5h0TQ8xDT14AaABAg

If you are referring to the benchy that was printed using default profile on K1 printers and the intention was exactly show the best results you can get using the default configurations. The other models follows the same principle, I use the lights on model to intentionally show all details, in cases like the green apple you can see the steps at the top of the model on the video, that you can't see on naked eyes, the idea is to show all minimal details, something that other channels hide from you. You can compare the camera image and zoom image to see how you see on your own eyes and macro lens respectively. Thank you for your feedback, that means I'm doing a good job.

I use the 0.6mm nozzle for my parts prototyping, as well. For large, open flow designs (manifolds, tubes/pipes and similar), I've even moved to the 0.8mm size.

I'd love to see the chamber heater mod, can you share it?

@@InventorsGarage I have on Printables already, but I'll make one specific for the K1 Max once I have it, if you search for NexGen3D on Printables you will find my work, I find that these larger printers need chamber heating, small printers not so much.

I bought mine K1 Max with those upgrades, no 3D printer brand sponsored my channel, so you can buy it as I did, just ask the seller if the model come with the new upgrades

@@InventorsGarageThanks it's so kind of you to reply, when did you buy it sir?

The benchy that was printed using default profile on K1 printers and the intention was exactly show the best results you can get using the default configurations. The other models follows the same principle, I use the lights on model to intentionally show all details, in cases like the green apple you can see the steps at the top of the model on the video, that you can't see on naked eyes, the idea is to show all minimal details, something that other channels hide from you. You can compare the camera image and zoom image to see how you see on your own eyes and macro lens respectively. Thank you for your feedback, that means I'm doing a good job.

Hi, in the caption below the short there is a play symbol, called PLA Dynalabs. Click on the play symbol to see the full video, it's very good 😉

Hi Fernando. Yes, in X1C I have using the Generic PLA.

Yeh I know, sorry, the AI is not good

Yes, I also didn't like the accent the AI gave me LOL

Hi Mark, if your Creality K1 Max arrives with the unicorn nose, yes, you can.

@@InventorsGarage would u know how I could set that up for orca slicer I didn't see the option on it or would I have to modify my settings to get it

I don't know what version you downloaded, but even the bugged 5.0 work with STL files. I recommend you to download the latest version directly from the Creality web page

@@InventorsGarage well if you keep my unexperienced noob remark its your choice. but to my defence ill say I'm a total noob and I didn't know better at that time. of this comment I just tried this upgrade and couldn't get anything to work and I was kinda bumbed out. so my apologies. however if you're a noob like me and feel the same way please give it time and don't be impulsive like me ...