วีดีโอ

Ciao. Una qualsiasi pompa, che però sia autoadescante, cioè in grado di aspirare l’acqua partendo dall’aspirazione dell’aria. Io ne ho usata una a membrana, l’avevo presa su Amazon.

@@maxsupergiovane Presa, grazie 1000! "Autoadescante" era la parola chiave che mi mancava per trovare quello che mi serviva.

Hi, you are right, there is no reset. I’ll add it today and you should see the new version this evening.

That would be really good! I'll watch it tonight. Thank you very much!

Hi Enertex KNX/IP interface and ABB switches with embedded power meter. Don’t recall the exact model.

Hi! Yes! :-)

Hi, you should ask in the Ha forum, as i haven’t HomeAssistant.

Hi The knx secure part is still under development! It’s not ready yet.

Thank you for your answer. Is there currently a way to use KNX-ultimate in conjunction with KNX-Secure or do I have to deactivate KNX-Secure in the ETS?

Hi, just search node-red-contrib-boolean-logic-ultimate in the palette and install it.

Hi, thank you very much :) it's helps a lot

Hi The tanks remain in place. So no issues!

Thank you Marcio!

Hi. I’m not able to confirm that the node works on all HIK control devices, because there are many models and different firmware out there! And no, you cannot handle users straight away, but you could use one of the Hik nodes (don’t recall the exact name now) to send raw xml commands to the access control.

Hi The compare works with numbers only. You mist use the boolean logic node for that.

@@maxsupergiovane Ty for the answer I’m kinda new to bide red and your nodes help me a lot. Also your videos are short and easy to understandable. It seems that u are an expert at node red. Could you help me? I just wanted to have a node that has 2 inputs. 1 with a payload . And the second should just check if it is true or not and let the input 1 passtrough do you have any Tipps for me maybe ?

@@Zockeer1994 Hi. Node-Red doesn't allow a node to have more than one input. Usually, msg.topic is the property that allows you to understand, what msg are the node receiving. You can achieve your goal, using the InterruptFlow node. Just check it out, and read the help to understand how it works.

Hi. Remove the config nodes of knx easy. Just remove the palette from the node-red menu. Here, you can also see the hidden config nodes and you can also delete it.

Thank you, but there is one more thing. Previously I had installed node-red-contrib-knx-easy but I can't get it removed. Message: Removal of 'node-red-contrib-knx-easy'. Removing the node uninstalls it from Node-RED. The node can continue to use resources until Node-RED is restarted. Failed to remove: node-red-contrib-knx-easy. Unrecognized module: node-red-contrib-knx-easy. Check the log for more information. What can I do?

@@hjb_l_4614 Hi. Sorry, but you should ask on the node-red forum. I cannot help you on that.

Hi. Yes. I'm working on that...

Just for info, is out a new version with battery sensor.

@@maxsupergiovane Grazie!

Great work again ❤ Just a question for Effects / Blink. Would be great to choose a colour for the blink but return to previous setting of colour when blinking is stopped (alert szenarios). Maybe this is feasible with NR, maybe not?

@@cybersmart_eu Yes, good idea. See you with next version...

Hi Geck. I’ll integrate all the things. I will buy a Dial Tap to be able to integrate it. It’s a very interesting device.

@@maxsupergiovane I'm looking forward of the intergration of the worx landriod into the knx-ultimate-node 😜

Tap Dial has been integrated in 2.0.9. Update to enjoy that.

@@maxsupergiovane Thanks a lot for your work

Hi. You need to use msg.topic = "Interrupt" and in msg.payload, true or false wether you want to allow or interrupt flows. Please see the example here (scroll down to find "Interrupt" node help): github.com/Supergiovane/node-red-contrib-boolean-logic-ultimate

@maxsupergiovane thank you for the reply. Sorry, I am doing something wrong. What payload in Inject and what msg in interrupt node to stop flow of I use "pass telegram"

@@user-qc5yi3ne1h just copy the example in the page i linked you. In the video, i show also how to do. If you need more help, please open a gitHub issue github.com/Supergiovane/node-red-contrib-boolean-logic-ultimate/issues/new so you can share your flow with me.

@@maxsupergiovane done! Thanks a lot!

Ciao. Non avendo a disposizione alcun apparecchio con riconoscimento dei volti, non posso svilupparne la gestione. Dovresti comunque poter vedere i messaggi, se elimini i filtri, impostando le due ultime opzioni nella finestra dj configurazione, su “all”.

Ciao Salvatore. Nel frattempo, puoi dare un'occhiata a questo video, che descrive come utilizzare javascript per gestire i messaggi: th-cam.com/video/jeZRenC22ho/w-d-xo.html

Hi If your gateway is a router, just put the standard multicast IP 224.0.23.12 instead of the unicast IP

@@maxsupergiovane Thank you very much will continue to watch your videos have a great 2023

Hi Steven. I had also done that like you, for my old Narwal, but my goal now was to completely avoid using the dirty water tank.

@@maxsupergiovane I like that as well :) prevent the sludge from building up. I think to properly automate the tank system, cleaners would need to be introduced as well. Perhaps a gravity-fed bottle-dispenser for the clean water tank would be enough, then as it flows through the rest of the plumbing it keeps things clean. I always use a cleaner with my robot, as it's much more effective at the task, not to mention the dirty tank smells much better. Good job. Eventually when I finish my system I will post my results to share with you.

@@scrampker I've mantained the clean water tank, exactly to be able to add detergent as needed. It works very well and that little solenoid allow the clean water tank to be half full everytime. Not to mention, that i've put a Shelly water leak detector near the robot, to warn in case of leaking. ;-)

what kind of pump are you using to empty the grey water tank ? A small peristaltic one ?

@@SC-yy4sw none, actually. I bought the official kit. This diy is far too much hassle. I'm reusing my parts in other projects.

Hi. Yes. Another dev is helping with the “secure” implementation, but it takes time and mich efforts.

@@maxsupergiovane I'm tempted to give KNX-ultimate another try. Do you think turning off ip secure is a big security risk?

Until now, no one using knx ultimate (see the github page, at the bottom, to have an idea) is using knx secure. It depends where you’re using it (home, office, hotels, etc.) Currently there are no knx nodes for nodered in npmjs, having secure implementation.

I’ve never tested it

@@maxsupergiovane dont you have the Narwal ?

Yes, the T10, not the Freo. They are comparable in terms of cleaning, but the Roborock can also do vacuuming while mopping.

Ciao. No, nessun problema, ma avevo letto non so dove, di un altro utente che aveva il tuo stesso problema con i mop che giravano poco. Per il rientro in base, è un problema che possono risolvere via firmware, fermando la rotazione dei mops quando è in fase di aggancio.

@@maxsupergiovane Ok Max Ti ringrazio per il tuo aiuto e quindi Contatterò l'assistenza per capire cosa bisogna fare col firmware o se mi devono cambiare il robot Grazie

Hi. They are simulated in this sample. You can add your own sensors and lights coming, for example, from a KNX devices, Philips Hue and sonon.

Ciao Filippo. In definitiva, il Roborock. Non che l'X1 lavi male, ma lava un po' meglio il Roborock. Probabilmente avevo un po' sopravvalutato l'efficacia mops rotanti.

Ciao. Roborock. Lo trovi su Amazon.