วีดีโอ

Do you know what lie angle the putter was before bending it up?

The sliding ‘knob’ seems to get in my way imo more than helps. I took mine off (easy with bench grinder) and am going to try without. The socket can hook up to my wrench and/or small battery operated wrench (being sure not to go too fast). But also using an extension allows me to set it inside the bench vice below the shaft..and use it to aid in balance….which allows me to use one hand to apply heat and other hand to turn wrench (or tap/ pulse).

As a senior with a slower swing speed, my results from standard Callaway steelhead hybrid vs one length Pinhawk was totally different. Pinhawk was much higher launch, steeper descent and distance was almost equal with Pinhawk being 2 yards more (using 25* on both clubs)Later purchsed the Cobra F9 and they are slightly longer than the Pinhawks and again the launch was high with steep descent.

Sorry if I missed it. What is the width of the area? Ever have issues hitting the wall? I'm looking to do something similar

Good swing.

I presume you must use windows instead of a Mac. Is your pc just a normal setup or does the pc you have must be a higher video card and higher requirements. I heard it must be a gaming pc but those are expensive.

This way the club sits in the V

Flip the spreader 180 degrees from how you are using it. Drill hole and mount to the vise with c clamp or bolts. You get the idea though because you’re handy.

I naught sulfuric acid. And how much water do I need to use? And do I poor the water in the sulfuric acid. Or sulfuric acid into the water? Or what should I do?

Do you have trouble with distances reading with either of those mats? My unit will read every shot, but the distance is very short. Everyone is saying mat movement. I have the same mat now as your second mat.

Great setup. I am in the planning phases right now as well. I am building out of wood also since I know that process quite well. Enjoy your sim.

GREAT JOB!!

Nice setup!

Love the video! Just out of curiosity, what song did you use for the final showcase starting around 9:33 into the video? Absoulutely mesmerized me.

SUPERB !!!

Anyone know what golf course this is?

Genius!! I just received my $16 gear extractor yesterday. I'm not handy with working with metal ,but found a local machine shop that can cut the U groves. Was about to buy $149 extractor from Golf Works, but you saved me tons THANKS!!!!!

A couple tips. Step 1 should be heating up the ferrule for about 15 seconds, and use a scraper or razor blade to cut it out. Now the connection between the made plates, and the club head are much more tight, direct and accurate. Step 2, The heat source should never stop moving. When you keep the flame pointed at 1 area of the club, especially on graphite, that's when the melting, chipping and cracking happens. The design and concept is nice and will work, but eventually, if you are pulling a ton of shafts, you'll need a way to mount all pieces of the jig permanently. Good job Kley Golf!!

Great review, thank u

Picked up a set of these. Preassembled with the Stiff Elevate shafts. Holy crap, I fell in love with the first strike. Even off centered hits don't feel terrible. Gained about 10-15 yards per club. Best purchase I've made in the bag. Next up is either the TC Pro driver or the Puretrack putter.

Followed your process and 15 minutes after starting pulled the first shaft which came off within 20 seconds of applying heat. Shaft came out perfect with no damage and was ready for a new adapter with a minute or two of hand sanding

Kley, Are you still playing single length irons?

Took a chance on these after getting a deal on eBay and honestly they’re amazing they feel amazing and work great for me. I have only been playing consistently for about 6 months or so and didn’t think I’d be able to hit them well enough but I do. My 7 goes about 175 so butter

The problem with the bushnell launch pro is the 500 dollar a year subscription plus the yearly cost of the simulation software. This is a big no for me

This reminded me of my first belly putter...I took an old putter and cutoff a graphite shaft and jammed it into the the putter...it worked well..I eventually invested in a factory built belly putter

Looks great imo

i thought FSX Play didnt support AMD Gpus?? this is great news because i just built my gaming pc that has the top tier amd 7900xtx

My wife would kill me hell I would kill me for leaving the car in the garage. Note: I'm not good enough to not shank a dent in my car.

What’s the size of the hitting area mate?

how far back from the impact screen are you hitting?

Nice video. A good way to save money. You can always upgrade in the future if you need to.

Kley. I just recieved my KE4 5 wood kit and according to the trim sheet they sent me it looks like you only need to trim the tip 1".

When i first saw the pillows, i thought it wife kicked you out for this build haha

Great little video. I always enjoy the DIY route to problem solving. Just a suggestion, but instead of using a gear puller, you might wanta try using a woodworking pipe clamp. I think it would give you a little better leverage, plus with a little creativity, you can find a way to mount it solid so you don't feel like you need 4 hands.

Revisiting this video after a few months and I really agree with so many of the sentiments. I am a new golfer, been playing for a little over a year and currently play off 20hcp. Being a recent graduate and newly wed, practice time is limited, I’m lucky if I can get 9 holes in on the weekend with a range session in the middle of the week. So for equipment, anything that makes the game easier I am all for! No pride or ego here. I currently use Cobra OL hybrids in a 4h and 5h, and I am looking at the Eleven brand to replace my 6i and maybe even 7i in the future. I also use Cleveland Smart Sole wedges which includes a chipper. In terms of practice, focusing on short game has been the biggest improvement so far. I’m sure as my handicap lowers, the long game will become important. But for now, being as dialed as possible on the greens and 100 yards in is the focus. Life golf goal is to play off scratch at my home course, and break 80 at courses I visit. No rush to accomplish that, just slow and steady. My goal this year is to break 85 at both my home courses and lower my handicap. Thanks for this video, serves as a reminder that good golf can be achieved even with a busy life, just requires some intentionality.

Curious on the depth you have in your garage? Looks like 10’ wide. I’m considering something similar but worried about the garage door tracks being in the way (21.5’ garage depth). Great video and great setup, thanks!

Hi, what is the name of the basic black tool? Thank you.

Enjoyed hearing this. I have fiddled around with many of the single length offerings. I am LH so it is hard to try without buying. Love to chat about it with you.

I dont think its ugly. The bad parts can be easily fixed. Great shape. Good work.

100% agree, the key to become a single digit or scratch is to be a single sided player - always shooting draw or fade

Total high wire act to do the epoxy steps in the living room over the sofa!

Great concept and video. I agree that a) going with higher lofted hybrids is a good way to go, and b) gapping becomes interesting when one does this. I was able to get down to 25 degrees with hybrids, and I'm currently testing the 2014 Adams ironwoods in the 6 and 7 slot to replace my irons (TS1-IMs). I'm thinking these might gap better than full-on hybrids (the Adams 2014 heads don't have bulge and roll, and are more compact than even their own really small head hybrids). I have also, however, got my hands on a full-on Adams 6 hybrid that I'm going to go toe to toe with the ironwoods.

amazon links?

I'm working on this right now. I think a big issue of mine is flexibility, trying to implement daily stretches to help rotation. Really enjoyed your video here.

I took my amplifier chassis (nickel plated) to a chrome shop they estimated $500+ per 10x13 in chassis. I bought the Caswell product, still waiting on a few aquarium items for my tank to process. Caswell claims underlying steel unaffected by stripper.

I’ve tried swinging like this but it feels so unnatural for me, also, my hands spin out. Did the same thing happen to you? If so, did you actively have to drop them?

You kind of mentioned it during the sequencing part, but when I'm turning and pushing my lead hip back, my club feels closer to the ball (you described it as being able to reach far past the ball). What do you do from this position to hit the ball without it digging straight into the ground? I'm finding Im fatting everything working on this movement

The problem with the discussion over early extension is that everyone tries to solve it by staying back more or keeping their butt against something like a golf bag as you say when that's just trying to bandaid the issue. You have to treat the cause to really stop early extension. The issue is usually that people setup too far or have their weight back on their heels. When you try to get dynamic and swing the club with force, you'll just naturally come back to even balance which moves you towards the ball. The key is to be on the balls of you feet with your knees in proper position over your feet when you set up and hit the top of the backswing. From there, you'll stay balanced naturally because humans are good at that.

Thanks for posting this. The is something I haven’t ever been showed.

Great idea, however if your going to buy a break puller, you might as well just buy a shaft extractor and save the hassle of making one