วีดีโอ

Super

The Pocket Osmo tolerance is tight, and if the support arm gets bumped and bent, the gimbal sticks at an angle. "gimbal protected" at start up, and camera at an angle, where the edge touches to bottom plate. No need to try to unbend (!) or disassemble. Take a nail file, make three passes over the sharp edge where it makes contact, on two sides, and 100% function is returned. The black anodize is broken in that small location, but us almost unnoticeable. When you file the edge, position the Osmo so the aluminium dust falls to the floor, not into the machine.

Is there an Encoder connected to the Shaft of the Motor which helps Rotate the 📸 Camera?

Okay - from what I can tell here by looking at the insides of this (thanks for that, btw) what appears to be happening from my POV is that little black wire that runs from the gold ribbon cable, out the back of the head through the side of the head and back over to the logic board on the camera...that's gotta be the gimbal wire for the motor...no other reason to run it through the moving parts. I think when they get dropped (or in my case hit on the side of a door frame while doing a tracking shot) that the wire or ribbon cable gets bent a lil or pressure put on it...I'm sure it doesn't take much to pinch it or pull it out of alignment. Taking apart probably reseated it or took the extra tension from the fall off it). I don't see anything else that could be causing the problem. This would also explain why the Sqeezing the end caps works or putting a piece of cardboard). the issue is that little black wire from the gold ribbon cable doesn't have a lot of wiggle room to do its thing. AT ALL) so it's gonna get reseated just right or get the tension off it...depending which way or side it was dropped). Any other thoughts, gang?

Thanks so much for making this video! Is that piece necessary because of the weight balance? Is there something magnetic that the osmo can detect? How does the gimbal know if the piece is there or not?

Hi, Cris. And now, in 2022, still working? Or yet show the boring message "gimbal tap to protect"??

Black dress= Adams family.........

In America it would be gay parade...... " #sigh"........usa = idiots

👍🥰

Super

Frumos, ai un abonat nou - 44

Why would you start the video with the item open????

It's called SKIRT BIKE! So where is the skirt? THUMBS DOWN

I was almost about to throw away my pocket 1 because of same problem as others. So I decided to give it a try to fix myself just for fun before buying pocket 2. But I fixed it!!!! I watched your video 1 year ago. For me it looked complicated..😭 and I didn’t want to ruin mine with my hands especially I didn’t have proper tools to open it. Long story short, I did it this time with small kitchen knife. Till I closed all the parts I wasn’t sure it would work. But It works now!!!! Thank you so much. I even wouldn’t have tried if you didn’t share it.. Although it has a little damages on plastic part I am so happy. Such a shame I didn’t record what I did..

Brutal

What tools do I need to pull this apart and how do u take off the plastic bits the video starts out with it already off

The Osmo Pockets are surprisingly tough for something that has a delicate and precision part like the gimbal. Mine has had a number of unfortunate falls - and I don't mean from my pants pocket onto a thick carpeted floor; more like from the roof of a van onto hard concrete! Crashing to hard pavement whilst mounted on a 5ft travel tripod due to strong wind! Tumbling down a rocky trail when I lost my balance! All that and its still functioning as well as it did when new.....not as pretty looking, but hey, who cares. Edit: I did have to take it apart last year when I was having really useless audio. Reseated all the internal connectors, re-assembled it and its perfect till now.

This video helped me a bit in the disassembly process, but unfortunately it doesn't really fix the problem.

Thanks for your video it helped me fix my Osmo Pocket.

Finally a gimbal error video showing the CORRECT end open. :) Thanks

I have problem with osmo pocket sensor. It seems dirt inside. When i look at the screen, there was a small black dot on top left of my view finder via dji mimo. Di you know How to fix it?

Does this help in gimbal problem?

hello, im having the same problem but i want to know what kind of scredriver did you use, cause everyone i find was to big.

Mine fell out of its case headfirst. My immediate thought was to throw myself under a large moving vehicle. Can't live w/o this baby - life not worth it. I finally got a grip on myself. I couldn't see any damage externally. Two of the gimbals rotated freely, but the one holding the tilt (middle one) was sticking in a couple of places. I put it back in the case. After an hour I switched it back on and hey, life ain't so bad after all. Thanks for posting this.

Hello Cristian Baluta everything with you? I was on holiday in England when I dropped the osmo pocket from a height of 2 meters. Then he went crazy calling. This video of yours gave me hope to fix it. I live here in Brazil

Too bad you didn't shoot the beginning when you were taking the glued parts off the camera. This part seems impossible to disassemble. I have the same problem because my Osmo fell from a ridiculous height 1 meter

How did you open the head?

hai sa nu exageram ...diferenta dintre un sat si un oras .......Oricum la ei ...si cam peste tot ....exista notiunea de bicicleta ...La noi este doar de weekend :)

Hi Christian, happened to 2013 MBP to me today. How did you end up fixing this problem? I tried everything but they are dead. First intermittent for a couple of hours, then permanent.

so. did your problem return?

f misto ;) + max richter = combinatia perfecta :)

Big Like!

Super! Am vazut ca ai prins si niste sateliti geostationari :)

Hi Christian. I'm having the same problem. Been reading threads about the problem for the last couple of months, but haven't yet stumbled upon a solution. What has happened in your case?

Foarte frumos.