วีดีโอ

*Make this easier on me* oh a gun workers block, costs like $12. *proceeds to pull out unmounted winch with 5000lb capacity*

any way to stop water temp from flashing without connecting a water temp sensor? and did you use the c clips for the magnets or just glue them in?

can't find the 42 tooth sprocket for my 2018 brozz with rear drum break, any ideas?

Hello! I have connected the speedometer and i am wondering one thing, my bike has original magnetic speed sensor with a magnet installed in the brake disc already. Its possible to use original magnet with chinese speedometer?

can you help please for some reason my tachometer is at max even without being connected also my gas gauge keeps blinking with it just being connected to the blue and white wire from the bike

Best instructions I've seen ,thanks.

my chinese cluster came with the wires labeled. but my bike they are not labeled. for a chinese bike what is the rpm signal wire? and also did you connect the neutral wire from the cluster directly to the top of the coil?

Thanku u sopved my karizma r 2011 cold start problem...what i did is with the help od acvelerator steel wire i made the hole of pilot jet a bit bigger by running one stand of thin wire than putting 2 stands and follwed by three strands of thin steel wire from accelerator cable and i kept on moving the wires in the pilot jet hole for some time which lead to increase in the hole size of pilot jet and now my motorcycle is idling proprly and doesnt goes off after you start it thanku....i didnt have jet available so i jave to do this diy mod with my stck pilot jet

your link didnt work where are these available?

Great video, thank you. Just have one question. How do you attach those darn magnets to the wheel?

Hi! You are very good! Can you help me please? I have the same tachi and i want to attach to a Gilera dna 50..im really go mad! Can you help me please to cable managing? If i give you a email can you help me?

what does each of the number represent

Can’t see anything in this video nor are you explaining what you’re doing.

Just want to say your a lifesaver, been trying to stop the damn fuel gauge flashing for ages .. my bikes from 92 and it doesn’t have a fuel gauge

Does it come with rpm sensor?

You were doing great until your camera was 4 feet above your work and you couldn't see sh*t and I didn't have the x-ray vision to see through your hands.

Need help hooking this unit up to a drz400sm 2005 model. What I need to know is the colors for each wires that got to the speedometer to the bike 🏍 wires. I am having a hard time trying to figure it all out.

Did you really put music over the sound of the exhaust on an exhaust modification video? smh... lol

little to bright.. cant see anything your doing..

Nice work! 👍

Really liked exhaust video, not, your the man of unavailable parts referral maybe I need a code lol💣🤯

Thanks I purchased 2020, the instructions to what steps you took for headlights and turn signals very vague, but I know how to make slot of sparks with a grinder thx

Hi what was total time spent installation,? Thx

Most of your upgrade mods are unavailable any others suppliers? Thx

Love from DeKalb Mississippi USA 🇺🇸

Where does the "speed signal" wire connect and how many volts goes to it?

Buenas Tardes¡¡¡ como se puede pasar a color azul en la pantalla del tacometro?

Which wire from the cluster. do you run to the ignition coil for rpm?

It's a weird story because I'm in England and I went to a fle market I was looking through a man junk and I came across 1 of these knifes and the man couldn't open it and wasn't sure what it was I paid 50pence for it got it home and it's exactly the same knife made in Sweden very similar story rare little knife

What's with the music it ruined the video man

my 2020 bashan storm has been over 10,000 miles. my question is, did the mikuni carb make that much of a difference? my bike is having issues and is could either be carb problems or electrical. this is frustrating because I dont know how to find out the problem to fix it quickly. please help however you can. please ask the questions that should be asked so we can fix this. i replaced the stock carb with a pz30.. i think is got me by but my have caused some extra problems. im not sure

Bring your overhead camera closer to your operation. I couldn't see anything

How do you change colors? What do the numbers mean? My says 588 01. The tach works but the speed is a mess. I have 2 magnets.

A few trips to a muffler shop will cost as much as buying a cheap tig welder and learning something new! Edit: Okay nevermind. $20. Hadn't gotten that far yet. Definitely looks like a $20 weld 😬. Of course we are all more critical of whatever we spend our time doing and so as a welder I will always care about that more than a non welder. But seriously, there are some inverter machines that will get you tig welding for cheap, and they are actually quite good. The technology is just becoming less expensive. You should definitely look into it!

hey got a question on which wire was it to get the fuel gauge to stay full? I WISH I CAN USE IT AS a battery guage on my eletric bike

Thanks a lot for the video, I certainly appreciate it! Going to get one now 👍🏼

How's the visibility? I feel that reflections would make it hard to read I think outdoors in daylight (when 90% of its use will). I am considering one as a cheap and easy way to replace the broken mechanical gauges on an old bike.

bits moving too fast. you'll never get through. stainless hardens as it heats.

di you mean samDo ? i ordered a identical model from another brand and it sucks cant even enter the setup. i can find a similar one but its not sambo but samdo ? thanks for your video its amazing !

Pretty sure that brand name is frowned upon

Thanks a lot for showing us this! It's helpful!

Shere your call number, I'm buy speedmeter

It’s just lazy to not take it apart and fuck with the heat treat

II have a digital gauge Chinese I am putting it on I am putting it on a Kawasaki 600 or I'm trying to R I'm trying to figure out the wire color 4-D a color for the RP m's

Hi which cold start pilot number you used thanks

Great job!!! Thanks for your time & video !! It looks like a well built strop👍👍👍

So if a bike gets signals from the ecu will this work with it?

Hi I recently got a Bashan storm but drop a plastic tube in the oil tank, need help taking the tank apart safely to get the plastic out I don’t if you could help me

So man I’m coming to the party a little late but can you explain the pinned connector with all the gears it’s confusing me I got the other I believe. But this one has me stumped........also very random but what kind of background music is that I love it

Hi Sir I followed your instructions and now my speed reading is much accurate, but my concern now is when I reached 60kph my reading would start to go down like I know Im running about 70 but my reading shows 50+ hope you can help me out