วีดีโอ

@@jaytay7989 my freaks are not gritty. I have 3 of them, the mini in carbon fiber the full in carbon fiber and the original full size and they are all smooth.

I guess you have to take this in context with most of the hunting focused rifles I shoot. My norm hunting rifle is a 300 Remington ultra magnum. I also use a light weight 300 win mag as my back country rifle and a 7 mm rem mag is my current Florida tree stand gun. So taken in context a 556 has no recoil. I understand if your opinion is different and that is ok.

I don't think you have done anything wrong. The cap on the a400 only needs a quarter turn to unlock. So unlike a screw on cap that quarter turn is really tight because it has what feels like detent to overcome.

@@southeastwhitetails thanks!

I hope you like it and have a lot of fun hunts with it.

@@ploxplox1109 yes 3 1/2 inch shells.

@@southeastwhitetails ok thanks because some websites I try to order this shotgun it says 3in confusing so it will shoot 2 3/4, 3in, 3.5

@@ploxplox1109 make sure you are looking at the 12 gauge. I have the 20 gauge too and it shoots 3 inch. The 12 gauge shoots 2 3/4 , 3 and 3 1/2 inch shells.

@@southeastwhitetails ok thanks again will do

@@southeastwhitetails Sorry to bother you man I just spoke to Beretta Customer service guys and they told me only shoots 2 3/4 and 3 in whats the exact model you have ?

Maybe I do know. Maybe I have a few Rugers. Maybe I still like the the DD better. Maybe... The Internet is a place where it seems that everyone wants to say what someone else likes is bad. Maybe... I don't do that. Use what you like, I was just showing a more traditional configured semi automatic hunting rifle. Thanks for the comment.

I've shot a deer and a hog with them. Both head shots from less than 5 feet. So I've never actually recovered the bullet. Thanks for the correction and clarification.

I have one of these on g19 and on a g47. Both work very well. I've put the g47 slide on the g19 frame and so... g49. Yep works just fine.

@@southeastwhitetails thanks man, I’m getting one today haha.

@@Falling-faster let me know how you like it. I have only a sample size of 2 but I like them so far.

@@southeastwhitetails I’m going to pick one up tomorrow I think. I’ll let you know though!

@@MrPerry61 what are the torque specs? I bought one from a friend but I don’t have the box.

@@Falling-faster book says 15 inch lb

@@MrPerry61 Thanks! That really helps!! I didn’t want to shear them off.

I've never really looked into that. I small game hunt with this shotgun so the shots are always under 40 yards. Main thing I like about it is how light and easy it is to carry compared to a 12 ga. That isn't only in the weight of the gun but in the ammo I dump in my pockets for a day of walking around in the woods. And the recoil seems to be way less too. My guess would be that no it doesn't get better range than a 12 gauge with the same shot size. Less powder and less shot of the sames size.

Hope you enjoy it!

Glad it helped. This is still the knife I carry in my pocket most hunting and just plan edc.

@@CarlPapa88 I kept the gen 3 too. It gives me something to shoot with iron sights and after that many rounds the trigger feels pretty good. I guess it is finally broken in. If you decide on the G19 let us know how you like it after carrying it for a bit.

I don't have a video showing it but it is right around the rib on the barrel where the rib connects to the barrel. I used this gun this year too for turkeys and got to stay and hunt in 3 states. It hasn't gotten any worse. I have another one that I duck and dove hunt with and it isn't having any issues. I also have a 20 gauge a400 and that isn't having any issues. But this one is so can't really say why. I clean it an wipe it off after I hunt in wet areas or rain so whatever is the problem is a problem with this one gun. Thanks for watching. Let me know if you have any other questions.

@@southeastwhitetails I have one that’s not a year old yet and has some missing right above the serial number above the trigger on the side of the gun. You think it’s worth calling Beretta?

Depends on how much it bothers you. If it gets worse I might call them. I won't let it keep me out of the woods so it will have to be in the off season for me.

@@maviskilpatrick7592 that was somewhere around 120 yards. We have a feeder off to the side at 100 yards from that stand and they were a little past the feeder.

Very interested in your followup and if the new screws did the trick, thanks!

​@@SplashOfOrangeso far the new screws seem to be working. I'll try and do a followup video on it after I've got enough rounds to make sure.

Thanks for the feedback. I don't have good video equipment. I probably should do a sound check before I post a video. Thanks for watching.

That is a good question and I can only give you my experience here. I also don't know what you consider a long time. I left two of them, one on a g19 and one on a g47 in a safe for a month. When I opened the door to check, they were both on. Please take this as just my experience with a very small sample size.

@@southeastwhitetails At least a week or two, maybe three max, if I couldn't make it to the range due to schedule. I appreciate the information.

@@MS-ii6xz from my experience it would make that amount of time. If you decide to try it let me know how it works out. That would expand the sample.

@@southeastwhitetails I am still thinking it over, but for sure, if I do, I will definitely update.

😂

When I first got this holster it was hard to even get the gun in. After a while it was like the holster molded to the gun. For normal edc or hiking it is fine. I wouldn't recommend this if you are going to be really active but then again no holster that isn't at least a level 2 is for that. Thanks for the comment and the question.

@@southeastwhitetails very cool. Just snagged one 😎

Glad the video was helpful. The one with the decocker only was a cz p07. I got it at bass pro shop in Gainesville Florida for around 500 dollars if I remember correctly.

Thanks for watching. My carry rotation leans more towards the strike fired guns like Glocks and Sigs too. I do think that the hammer fired guns have some big upside when it comes to safety and they are just cool too. 😀

Sorry if I personally offended you by showing a gun malfunction. This isn't a tight tolerance gun but with that said maybe it was ammo or maybe it did need a break in of sorts because it has been mostly reliable after that one small issue. Either way this gun isn't for self defense or duty use, it is more of a comp or range toy firearm. I'm not offended when you say a Glock or anything else malfunctioned. It is what it is and to have a personal attachment to a tool, especially one you didn't build, is strange to me. Oh and I can't comment on Lamborghini or Rolls Royce 😀

@@southeastwhitetails Thank you for the response. I wasn’t personally offended, I was merely pointing out a common theme among those in the TH-cam Gun community, that is insisting on repeating that “A Gun should function 100% out of the box!” Being a former mechanic and a 1911 Gunsmith, I have to explain to people that some items, like it or not, may have to be used for a little bit before they run to their potential. It is what it is….

I got the case these boxes are out of from Top Gun Supply. To be honest I get it from wherever it is the cheapest at the time.