วีดีโอ

Any advice on how to proceed when one of the parts breaks? The tip of C11 broke off and now I’m stuck.

My dude. I never comment on TH-cam videos but I had to just say thank you for this! I was stuck in step 12, the gears just kept falling out all over the place. This video was so helpful, especially because I could compare with your model and see that some of my little yellow washers had gotten smooshed together and I needed to pry them back apart. I was ready to throw this in the fire pit! So thank you. Mine is now complete, though a little fragile. :)

Fantastic idea

Hello. I'm currently building this and I could not find the piece e1. do you know where to find it?

There's some missing parts in mine

This is how you make a video for the 3D wood puzzles. No loud head banging music with 10 times fast forward speed. Take your time, point out the specifics in case you miss them on the directions which I did a couple of times. Precise and to the point, thank you very much. I'm only on step 4 but I'm gonna follow you to the end, you got another sub.

Im only at 16 minutes of video but you have helped me so much!! Thank you!!!

You keep going off camera? The 2 sections I needed to see but you didn't record

There is NO C4, it's a W1.

Ya lo terminé

My daughter bought this for me for Father's Day and I just completed it. I have assembled many wood puzzles from Rokr, Ugears and Wood Trick. Your video definitely helped with the assembly. The wood used by Rokr is not nearly as good a quality as Wood Tricks. As soon as I pulled the piece back and it locked in place part C5 broke as I hit the release button. C5 was installed at section 4 and I wasn't going to uninstall it just to glue it back together, the cheap wood used by Rokr should not be made for something like this that is a working mechanism. Anyway thanks for video, it was great, the wood not so great. For a little extra money I'll stick with Wood Trick puzzles. I haven't had a bad piece yet with them.

does it work as actual clock ? and is it accurate ?

From where to get the element number P4? I cannot find it anywhere in the set

Te faltó la lámina de pega doble faz entre los pergaminos

It certainly didn’t take my son and me 2 hours, even with this video, more like 20 as I had to backtrack a fair few times as the printed instructions are mediocre. Had fun at least. I suggest using one of the shorter leftover metal rods and caps at the bottom side to thread through the aligned holes to hold the two main parts of the base and the shaft in place. Frankly, it’s puzzling how many parts are left over.

Hi, i would love to know in section 11 how to stop the gears from jumping out. I noticed you had some trouble too. Great video!

My wax is melting, what should I do? It's broken every time I apply it

A8 snapped

You are the best the way you describe it you take your time and that’s what I like. I feel that you’re the only one you are a good teacher and have patience and thank you now I’m going to start doing mine. I have one I a gift and I have to do it thank you.

thanks for the video. i wanted to see if anyone else had trouble with section 14 where you get the tip of the timing device through that hole and i see i wasnt the only one haha. great vid!

Ma che cera devo prendere quella delle candele va bene ?

2 HOURS, i didnt know what i got myself into huh

When i purchased, i saw its demo in the shop, the globe was rotating by itself, but after making it, the globe is not rotating by itself. we have to manually rotate it

your the best I had such a great time making this and following along to you thank god you made a video I would never assemble this on my own

where did you get your angled tool from?,great video by the way.

Hi Robert. At around 1 hour 54 you are trying to push the cog parts into the disc. They are a very tight fit. Did you just end up using brute force, I can't quite see how you managed to get them to engage?

The kits always have missing parts. Takes weeks to get them. The engineering is first rate. A real challenge.

I just recently got mine but it said something about wax…do you know which wax do they mean?

Completed. Your guide was very helpful, thank you. Quick question where can I buy a lighted stand/ base like yours?

Sir, My E1 is missing two, i can't find them 😢😢

I spray the parts with F 2 airplane wax. I also use it on my stain glass projects. Great for polishing your car, household furniture etc.

Great engineering but major problems with missing parts.

Thanks you so much, my wife put the manual in the trash by mistake. I thought I was done for

See there one am doing after too keep me busy

Am building one too Secret Garden? There one am doing

It doesn't work,mine broke in almost 8 places and I did the same steps as him

Yo... Thank you for such an amazing, easy to follow, and comprehensive build video! I'm following along with yours as I build mine. I've been watching your vid and switching back and forth with UGEARS official build vid also. Yours is much better for seeing exactly how the pieces work and fit. I watch the UGEARS one to just double check for fitment and stuff. Theirs is good. But fast and offer no vocal help. I like that you actually go through the entire build explaining things as you go. And to top it all off .... You have chapters for each page! Awesome!!! This is only my second wood kit. The first one was Rokr's Illuminated globe lamp. It turned out ok. But I realized I could probably find something online to help with this one, especially since it's way more complicated than the globe one. You def got me a a new sub! Thanks again for the effort and time you put into making this awesome video! \m/

Great video,and thank you for making things so easy to understand.The best example of building this loco that ive seen.

Just finished mine the moving parts are so stiff! I waxed it but they don't seem to turn properly. :(

Have just been given one as a birthday present, have watched all your videos on this model and will be starting my model soon. Hope that it turns out as well as yours. Have enjoyed this video, many thanks. Professor Ken.

I got this for christmas and stuck in section 6. What has me stuck is trying to get the little black rings to go into the pieces. Granted i dont have a hammer to help, but whenever i try to put the piece in, about half of the circle doesn't want to go in.

thank you for this tutorial. I love it.

Does this globe rotate automatically or manually?

My proud made me try to not watch this. Sadly for two specefic situations i reslly did have to check. I am happy and grateful for this instructive video! Its a beautiful piece and its so much fun to make

Bought the Rokr Curious Discovery solar system 3D model for my wife, who is an excellent, detailed craftsman, and we could not be more disappointed. It's certainly a difficult assembly with many, many parts and steps. However, even with the most careful assembly, the gears just don't work, which totally eliminates the objective. The planets don't turn and she is ready to smash the thing after hours of tedious work.

I just got this today as I’m 10 and this will help me soo much

Excellent video for assembly. I struggled at first to achieve more than a few minutes of time until I relubricated with Impresa wood lubricant all the gears and areas where pieces may slide over each other. What an improvement! Then I cut a toothpick about 3/4 of a mm longer to replace the one on page 62 that goes into the sphere. Also, remember to wind the clock completely. I'm now achieving 2-to 3-1/2 hours.

Quoi faire si j'ai cassé un morceau très difficile à assembler comme celui que vous posez à l'envers au début?

Quoi faire si il y a un morceau de brise., justement le morceaux que vous avez mis à l'envers

Hi Robert, i dont know if youre still answering questions but, Im having trouble with part D1. It seems like it is supposed to rotate independantly from part B9/C8 but it rotates at the same rate and doesnt spin gear c. I can hold part D1 in place to spin gear c but it wont do it on its own. Is there a way to fix this? Im also having trouble with part C8 as it is tilted on the music box and gets caught on the platform below iy