วีดีโอ

nice video. you get a thumbs down for the EV bike. I live about 3 and half hours away, by the time I ride there the batteries would need recharging. then i would have to recharge before I could ride it home.. I'll pass. my GSX-S1000 GT Plus can make it there on under 3/4 of a tank of gas.I fill up in Vonore, five minutes and I'm back on the road. I ride the Dragon up hill and back down. Ride almost all the way back on the same tank of fuel. fill up close to home,,,, another five minutes or so at the pump,,,DONE DEAL. SCREW the POWER WHEELS,, get a real BIKE. but still was a good video of the Dragon.

Hey Chris, thanks for sharing the video. I’m interested in the Ryvid as my 3rd motorcycle. I a huge fan of the dragon, riding it would be a must for any bike. Did you ride both directions? If so, how much range did you have at the end? Also did you feel like you had enough power? Thanks

If its not a crack its not a dodge ram 1500 2nd dashboard

Does the mirror have auto dimming the mirror not the camera?

It been a year how has it been?

Could I use this with a standard factory camera? I would just have to rewire it.

Ok, I'm confused!! WHERE DO I GET A 100 OHM RESISTOR THAT WILL PLUG INTO MY 1996 DODGE RAM PURGE VALVE CONNECTOR?????

What app do you use?

Thanks for the info, But I thought I was gonna see something on the charcoal canister on this truck. Because the rubber connectors are terrible. Mine deteriorated after it's set for about 10 years. Yeah I have 4 openings and only 3 of them are being used so do I just plug off the one not being used? Do you know Thanks for sharing look forward to hear from you bye for now Ken.

I have a older dodge vehicle that I swapped a 1999 5.9 magnum into using a stripped down harness. I have located the evap purge wire in the ecu and I am assuming that it is a switched ground. Do I just need to run this resistor between a hot and evap purge wire in the ecu to stop it from setting a code

Had this for over 2 yrs now. This pos never records any more, all it does is constantly reboots until it fixes itself. The 3rd party Chinese app doesn't work either. Also the mirror keeps sagging. Do not buy this shit!

Master Tailgaters suck! My mirror works when it wants to. The app dont even work any more and the mirror keeps sagging

Where did you get this from?

Thank you for creating and sharing this video.

So I have the 360 cubic inch. 2001 ram 1500. If putting a resistor in that connection turns the engine light off, it would mean that it not a purge valve or just a purge valve. A purge valve does not detect vacuum or pressure. It simply opens the valve so that fuel vapors can get sucked into the engine. I noticed in my rig two of them connections. That one and another below, a little lower. It seems to be a larger harness. There has to be some sort of sensor that detects either pressure or vacumm in them lines and if it can't it will mean fault code. Assuming it does detect either one, then the cpu sends signal to the purge valve to open. Once it opens then the cpu must monitor that it worked, in other words no more pressure in the line. But I will try this and see what it does.

I have a problem how accurate it's when it comes to pass and switch lane for what I see on your video with the digital the actual view way farther than the original one

The no tach gauge cluster from the Dodge Dakota

The fuel empty is red

Look at the fuel gauge

What’s up man same setup. Got into my truck the other day and screen will not come on. Voltage is good and all I get is a red light on mirror

So where or how exactly did you install the camera at the back of the pickup?

Where is the camera placed? Outside, inside, on glass or body? Do I search simply master tailgaters 10” mirror or is there a model number?

I would not do this I did it to my truck and permanently screwed up that circuit on the computer. Now I have a permanent check engine light

Acuna mattara

You made that install and set up look smooth Chris! Thanks for your support!

Hello friend, excuse me, do you have a phone number that can ask you a question, the truth is, you explain very well

Could u tell.me what size fuse is used I have the relay just need to know fuse size☺AWESOME VIDEO

Min leaks fuel bc I don’t have it on it and it’s a 98 would this work on it and dose your leak?

FYI: fuse and relay are under the carpet in the passenger footwell (on a RHD car). this was on an Audi A8 D3

What year is your ram? Did the purge valve look like this? www.autozone.com/emission-control-and-exhaust/canister-purge-valve/duralast-canister-purge-valve-pv308/910164_0_0

The check engine light is to say HELP. Looking and listening to your truck on this video... youre truck has died and is kept on artificial life support.. I want to cry.😭 I love my a Dodge and would never rip her guts out like this.

Omgosh this is probably why I cannot locate it!’ It’s gone!

Hey Chris my 2000 dodge ram vans fuel pump was replaced. Problem is it still does not get gas "sometimes". It will run sometimes but then when I go to start it and it wont start for days at a time. And then it will start again. Any idea what's going on. Any insite will be greatly appreciated

There's a 10 amp fuse on the passenger side fuse box the cuts the power supply to the relay

Is it still off

Thank for posting...btw..clear codes or even the theft system disconnect battery (both leads) and touch them together. Dealer charges 80 buck and guaranteed its all they do.

Yes it does.i have two dodges.one dakota.one ram 1500.ill trade both if them for a Chevy...lmao

Thanks you.tThis is exactly what I was looking for.

my A8 is sitting like a pancake, I did not remove the dash yet but I unplugged the pump and checked the power at the pump and the pump cut on, so as I work my way back to the dash is there anything in between I should worry about

on my 01 dodge ram 1500 i turn key on & off 3 times with out starting it to get my codes ; i got P 0443 is why i came here to see where its at

You helped me, buddy. You helped me. Thanks for the heads up on legality, i wouldve left her hangin and unpluged for god and everybody else to see.

Nice video!

Hi Chris. Mine is Allroad C6. I think mine 373 relay is no trunk with easy access. My compressor is new since I bought the car, however, my rear suspension goes down only on dynamic mode, and beyound 130km/h which dynamic activates by default if the automatic mode is on, the compressor tries to maintain its level every 1 or 2 minutes. Of course most of the time I choose confort mode to not force the compressor. Sometimes happen to me when I lock the doors to leave the car or unlock the doors, we hear the solenoid valve, the system is checking I guess, and so I hear the rear suspension leaking a lot (both of them), so I presume the bags are ok...ehat do you think?

If you hear your air suspension pump running for a number of minutes and do not want it to burn up/wear out before getting the dash apart to access the fuse and relay, just open the trunk and take the battery terminals off the battery until you get the dash open for a relay inspection.

2000 Dodge ram 5.2 myself near exact miles, my dash really not there anymore, and throwing the same codes. I'm on my second replaced water pump and it's blown a few rear wheel brake cylinders. You might want to check the stationary belt pulley. The bearings on mine froze up 3 weeks ago and almost lost a new belt because of it. And you are low on a/c freon btw.

My right (passenger) side keeps dropping overnight, changed the shock no luck, checked the valve body no luck. Shall I change the Relay? Says there is a leak in the system Thank you

Chris I have a 2006 Audi A8 I just got and the Air Suspension light is on, so I found your video and decided to check the relay and fuse. When I go check the relay and fuse are both missing. Can you tell me which relay and fuse goes there so I can replace? But I think I am going to find a bigger issue when I install them. Guessing previous owner took them out for some reason.

Hey I tried this on my 2001 Ram 1500 it's built in 2000. The code keeps coming back and the check engine light. I used the resister and plugged it in that same spot am I missing anything else? Or any other tips? I mostly just want the check engine light off.

Hi dear How are you I have a 2006 audi a8 I had problem with compressor twice So i think there's something else i have to fix Its woking sometime and sometime not working Any idea about it ?

thanks dude