วีดีโอ

No. As you can see in the video, I threw most of the parts in the trash :)

Yes. I don't think this model has a fake copy.

No. In one of the other videos, I redid the battery with Li-ion batteries and a BMS.

You will probably succeed. This machine is not very complicated.

Thank you

The speed cannot be changed unfortunately.

If this tool is used properly and serviced regularly, it is practically forever.

I buy it from aliexpress. "2S BMS"

Thank you

I think the Milwaukee 28 volt series is somewhere around 2008-2010, but I'm not quite sure.

Thanks

thank you

Useful and convenient. I'm thinking of recycling one of the batteries for it with lithium ion cells soon.

When disassembling I marked which one connects where on the motor and then connected them the same way. In reality, if you swap them, the motor will rotate in the opposite direction to the direction switch. Nothing will be damaged.

@@wsgworkshop495 Excuse me, the battery you use to replace it, do you know if it is 4800 mAh, 6800mAh, 9800mAh or 12800mAh?

Since the battery was old, I recycled it by replacing all the cells inside with new ones. Nickel-cadmium 2500ma as far as I remember.

I use this one: vi.aliexpress.com/item/4000174743975.html?spm=a2g0o.order_list.order_list_main.515.4e3e1802ydRfOj&gatewayAdapt=glo2vnm

I'm glad you like my video. The drill has constant electronics (monitors revolutions with a Hall sensor). It is implemented with a round magnet at the back of the rotor (before the rear bearing) and when it is assembled it falls to the sensor (which is located on circuit board of the power switch).

Thank you. Unfortunately TH-cam offers a rather small selection of good music and I try to pick the best songs.

How do you think it should have been done in order not to be "lazy"? I will be happy to hear your suggestion.

@@wsgworkshop495 😄

I found a broken one for a donor. I couldn't find anywhere that only replacement gears were sold. Only the entire gearbox is for sale.

The switching power supplies give exactly the voltage for which they are made, unlike transformer ones. To explain you more is pointless.

По моему, ты плохо учился в школе)))😂

For fun :)

@@wsgworkshop495 oui c'est vrai c'est mieux que boire dans des cafés. Vous avez entièrement raison.

Thank you! Chest or shoulder pressure is applied to the flat end (whichever is more comfortable)

Me too.

Thank you! 😃

Of course that's a good option too, but I had those NiMh batteries on hand so I put them in.

Do you need some kind of BMS for the lithium cell?

I use thinner mainly because I need quite a lot, and it's a lot cheaper than brake cleaner. I wait at least a day before assembling the machine to make sure it has completely evaporated and won't damage the new grease.

@@wsgworkshop495 Maybe you have noticed WD40 cleans off grease quite well - but it's also expensive. The main ingredient though is petroleum ("lamp oil") - which is relatively cheap and easy to get in 1l bottles. I use that to make a bath. I also have seen people use diesel for the cleaning job...

@@el_micha Come to think of it, perhaps the easiest way to clean the grease would be with gasoline. It should dissolve the grease and then evaporate quickly so I can re-grease the parts. When I run out of paint thinner, I'll try gasoline and kerosene. Thanks for the idea :)

@@wsgworkshop495 You're welcome. Everywhere I seen they use diesel, not gasoline. But I can't tell you why, I don't know the reason...

Lithium grease with NLGI consistency number: 0. This means thin grease (fast-rotating). It is used for the reducers of angle grinders. If you ask for exact brand "MC" .

@@wsgworkshop495 ❤️

Can I use white food grade silicone grease for kitchen appliances instead of Lithium EP 0 grease?

@@CEE2802no

From what I've seen, they look the same at first glance. I have not disassembled the DW version. It is possible that the difference is in the accessories that come with the machine (the case with bits)

Both adapters (the broken one and the working one) are switching.

@@wsgworkshop495 Got it. 👌

Hello, Thank you for the question. The old original charger CANNOT be used. I use a dedicated 8.4 volt lithium ion battery charger like this: " www.aliexpress.com/item/4001146100653.html?spm=a2g0o.productlist.0.0.6cd04be0YZ4czJ&algo_pvid=b239e4fe-e91d-4885-80aa-920753adddf8&algo_exp_id=b239e4fe-e91d-4885-8045a3-9207df&%dp_bdp=7f7df7df %22sku_id%22%3A%221200001591792758%22%7D & PDP_NPI = 2%40DIS%21USD%211.62%21%21%21%21%211E9CF1670074333333 " I have mounted a charging connector on the bottom of the battery enclosure. Also BMS for 2 Li-ion batteries (inside the battery enclosure)

It depends on whether you want to put it in a museum and look at it or you want it to be in as good working condition as possible. Personally, I use the tools I restore. That's why I always take advantage of the latest possible technologies. With an LED bulb, the lantern shines much brighter and for a longer time.

Скажите пожалуйста что за лампу он применял, маркировка, тип цоколя? А то лампа перегорела найти ч продаже тяжело