Timestamps:
0:00 Outemu Silent Peach V2
0:17 Cherry MX Black (Filmed)
0:31 Cherry MX Black (Unfilmed)
0:44 Cherry MX Brown (Filmed)
0:56 Cherry MX Brown (Unfilmed)
1:07 Cherry Nixie (Filmed)
1:18 Cherry Nixie (Unfilmed)
1:32 Vintage Cherry MX Black (Filmed)
1:44 Vintage Cherry MX Black (Unfilmed)
1:58 Mode Obscura
2:12 Novelkeys Cream
2:25 43 Studio Popu (Filmed)
2:38 43 Studio Popu (Unfilmed)
2:50 KTT Rose
3:06 BSUN Raw Linear
3:20 Sarokeys X BSUN BCP
3:32 HMX Cloud
3:47 HMX Sunset Gleam
4:01 HMX Hyacinth V2
4:16 Epomaker Wisteria Tactile
4:29 Epomaker Wisteria Linear
4:41 Personal Rankings
Testing out all the different switches I currently have on my spacebar. Any bad sounding/weird noises you hear comes from the switch, not the stabs. The HMX switches have some noise because HMX switches don't sound good when lubing the top out parts. But to keep it consistent across every switch, I did it anyways. The Sarokeys BCP switch sounds really bad because it did not have a tight connection to the plate, and was rattling around. If I put a layer of tape to stabilize the switch, the sound would be closer to the BSUN Raw switch.
Switch mods:
Every switch has the same method of lubing and swapped with identical springs. I use TX XL 50g for the springs and Deskeys V2 for the films. I lube each switch on all four sides of the stem only, including legs, with a light coat of 205g0. I lube the top out area of the stem, but I clean the bottom and the pole. For long pole switches, I clean the bottom housing hole where the pole goes into. Any switch that bottoms out via the pole is considered long pole, regardless of travel distance.
Board:
TGR Tomo
Both top mounted and oring (65a) mounted
Case foam
Keycaps:
GMK WoB
Stabilizer:
Cherry clip ins
Guide to modding stabs perfectly here: docs.google.com/document/d/1ZMEktIHW_NDL2k8VvvUYoajA4Sv2UZQpA_V3WQh29TA/edit?usp=sharing