วีดีโอ

Just purchase the basic version, the plus is not supported in the app and has a lot of issues.

Ciao, you can find some suggestions here: www.fender.com/articles/fender-performances/how-to-sound-like-eric-johnson. For the patch I could be working on it in the next days, sounds pretty easy...

Ciao, hai fatto una buona domanda emersa anche in passato. Puoi usare un cavetto con doppia USB-c ma non tutti funzionano ed in molti casi la connessione mostra problemi perché non si determina quale dispositivo comanda. Con l'adattatore otg mai avuto nessun problema quindi nel video mostro quello. In breve, se hai già un cavetto doppia usb- c prova, potresti essere fortunato altrimenti conosci l'alternativa

Thanks for your feedback, you understood perfectly

If your daw is sending MIDI messages (I would be surprised if it won't) you can replicate exactly what you have seen here using the same commands sent from the Daw. I can see your purpose is to change preset automatically when teaching a certain timing in a song. The only issue is that the Valeton does not allow to select directly a specific patch through MIDI regardless of the method used

Thank-you for your feedback. Honestly I repeated many times these are not scenes, sorry if it was confusing

To me they both have 7 presets, not clear what you are referring to. In any case mightier amp activates all functionalities of the device, what advantage would you expect from sending incompatible commands to the device? Maybe I misunderstood what you mean

It is a great device in my opinion, the only real issue is it sounds quite thin compared to the tone in earphones (which is great). My suggestion is to buy it from a shop which accepts returns in case it would disappoint you 😉

Thank-you, I am happy you liked it. My channel is very small, if you believe my contents to be useful just make sure to subscribe, like the video and share it, this would help me grow! 😉

Ciao, io registro usando obs studio, l'output del plugin va su un canale della scheda audio usato come ingresso audio per obs studio. Non so se ho risposto alla tua domanda

Ti ringrazio per la risposta….io utilizzo una scheda audio esterna alla quale collego la chitarra che viene “vista “ in entrata da OBS studio. Il problema è che attivando APFX primo sento la chitarra con gli effetti ma OBS registra un suono clean come se il plugin fosse spento. Non riusciresti ad inviarmi uno schema del collegamento da te usato ?🙏

@luchinoprazzoli5123 ciao, prima di tutto mi servirebbe sapere se usi Windows o Mac e che scheda audio hai. Comunque il trucco è usare come input audio di obs l'output di Apfx, cosi registri il suono wet. Di solito serve aggiungere un input audio ad Obs

Uso Windows e come scheda audio la Focusrite Scarlett Solo

Dove trovo l’output di Primo?

You will find a bad review on the channel. Enjoy!

@ i had high hopes

According to my testing the scenes are independent including the tempo, that obviously can be quite annoying if you use tap tempo often

@TutoJam that's the thing, a common use case is to have the clean or crunch sound on scene 1, distortion on scene 2 and lead (with delay and eq) on scene 3. It would be great to be able to set the patch bpm at any scene so when the time comes to switch to the lead scene you don't worry about the bpm

Ciao, does it happen only when recording? Is the tone ok in your headphone? Try also lowering volumes in all blocks of the effect chain and let us know if that improves the issue

@@TutoJam Ciao, thank you very much for your advice, after various tests with volumes I noticed that my Mighty Plug Pro was set to a quite low volume...now it seems ok with both the guitar sound and jam track!

I am very happy to know you solved it, thank-you for your feedback. Enjoy your Mighty Plug!

Sorry my friend, I had a family issue and forgot to upload the link. I think I can do it soon. Thank-you for your patience

Ok, I had it on hand. You will find the link in video description

Ciao, con iPhone è un pelo più complicato. Nel canale trovi un video per fare quello che chiedi con Android e il Mighty Plug pro, nei commenti c'è qualche spunto su come fare per iPhone. Spero ti possa essere utile

It is indeed due to impedance and vintage. If your pedal can accept line input you can use it as a filter but I doubt it. You could damage your devices, you are free to try at your risk

Thanks for your reply . What about using a DI box?

@trevordeighton3614 it is the opposite you need. You would need a reamp box

Thanks for the suggestion, I am definitely talkative and have no time for post editing so I tend to become boring. I will invest some time for preparing better and make it shorter. Thank-you for your feedback

Short story: you bet!! On this channel there is an ugly review if you are interested. Consider it is exactly a Laney Cub in every component and the full electrical scheme. On the Facebook group " tube amps users" it is recommended (with a cone upgrade) over amplifiers that cost 5 times the price. Google Monoprice tube 15 for great reviews. Just pay attention to the voltage you need, for 230V the Harley Benton, for 120V go for the Monoprice

Sorry I don't understand the question. Could you please elaborate?

Quella e ulteriore latenza di obs studio

Thank-you for reaching out, these feedbacks are very helpful to keep me motivated

It could be possible using the MIDI mode on the Valeton but when it is activated you cannot use it anymore as effects

@TutoJam thanks

I can confirm the action of the box is very high but I like this conservative approach speaking of an acoustic. Setup is easy and I agree with you if someone don't want to make a setup to a new guitar he/she deserves any trouble

@TutoJam Exactly. I learned how to set up all of my guitars electric and acoustic, its really not that difficult if you have a few specific tools and a basic understanding of how it all comes together, along with some patients and you can save a ton of money paying a luthier to do basic setups on your guitars. It is a skill well worth learning if you play guitar.

For which device and which song?

You will find a short in the channel of a preset I created in a couple of minutes. Is it what you were looking for

If it is a mark II it works exactly the same

@@TutoJam thank you very much!

Could you please elaborate? What do you want to connect to what to do what?

@@TutoJam the problem is that I can get no connection between mvave chocolate and midi usb , I have all the time message "firmware update" instead footctrl

@@TutoJam I already wrote this , I can not get into a foot control setup.

Sorry my friend but I don't know what you are using, which device, which pedal, to do what. Please make a short movie and send it to customer service so they can support you better

Sorry, from this it is more clear, I would strongly suggest to send a short movie to cuvave support, maybe that can provide a version of the app to force a firmware update

Yes you can pick the sound from the amp through usb

Not really as the NUX Mighty does not include any real wah effect that can be controlled. You can obtain a slight effect using it to control the WOW parameter of the touch wah effect but don't expect great results

Try removing the plug from your smartphone Bluetooth and pairing again

Ciao. Are you trying to pair the Ampero controller with the Mvave receiver? Sorry but if that is the case I don't believe it could work. The pairing between the Mvave chocolate and the Mvave receiver is automatic as they have been designed like that, any other pairing must be done from a computer or a smartphone, I don't see how to tell Ampero control to pair with the receiver. Sorry

Well, it does not bypass anything, you will hear exactly what you would hear with headphones. If you are using a guitar amplifier disabling the IR would be advisable where possible (for example Mighty plug pro allows it, Mighty Air does not). If you are using an FRFR or studio monitor you don't need to disable anything

I purchased it with that purpose and will test it soon

@@TutoJam Thank you!

​​@@TutoJam I've just seen in a presentation video from M-vave that the host function works only if the chocolate midi plus is powered by external supply (not the internal battery).Maybe you already known it but just in case not. The first time I try the host function I think that my chocolate plus was defective.

@Axilot thank-you for the information, I am discussing with Mvave support as there seem to be this and other illogical limitations with this plus version, will keep you updated

@TutoJam Thank you, meanwhile I've tested the chocolate plus with my Nux Mighty Plug and it works as Bt host so I can change the preset and turn on/off fx without use the Mightier App on the smartphone. I've configure it with cubesuite following your tutorial and the midi map you shared , then turn on the chocolate plus in host mode and the mighty plug and they connected togheter automatically. Very cool!

I have the same issue with chocolate plus, it seems they changed the transmission protocol and obviously it is compatible neither with MIDI Bluetooth nor the protocol used by old chocolate. I am really disappointed by MVAVE

@@TutoJam thank you.

@@TutoJam Do you think can I change the firmware?

@ВасилийАлхимов-л2п only MVAVE can reply to this...

Thank-you my friend, too bad this video had a troubled story. I had to cut the playing samples and separate them as short (copyright issues) but I wanted to keep the part related to dynamics. It came up like this, definitely not the best😔

Ciao, I received it as well and I can confirm the plus is not showing up while regular version does. It seems Mvave did something strange, honestly the plus seems to be incompatible with any standard protocol, I am not able to make it work correctly so far.

Damn, I bought it for this one purpose, I wonder whether they might fix this in a furture firmware update? I am hoping firmware could fix it ​@TutoJam

@SnifterRoux So do I my friend, I was expecting an improvement not to lose functionalities

I am in the same situazioni I've choose the plus over the regular one for the additional features but I cannot associate it with Mightier Amp. If you find a solution please share.

@Axilot will definitely do. I hope Tuntori will be able to do the magic

It should work.

gracias por tus comentarios amigo y saludos desde Italia😄🖐️

@@TutoJam te quería preguntar, si en la nux mighty air, mvave chocolate, tienes más videos, por qué estoy pensando comprarmelo, tienes un vídeo tocando ? Me gusta canal, sigue así amigo.

@antonioramos4045 I would say all my first videos are about that. Check the channel list

Nux mighty lite have 2 plug..(aux in and phone) Where i plug my cable for my nux? In Aux or in phone?

@TeriSanusi phones

Thanks for your kind feedback

Hi, in the manual on page 73 you will find them all. Look for the commands for CTRL1/2/3/4/5/6/7/8

@@TutoJam These ctrl are to turn on/off effect blocks though. I needed the same as the ABCD buttons do in the bank/patch mode...

If your bigger amp is provided of a mp3 input (for external sources), you can connect headphone output of the Mighty to line in of your amplifier. Better not use your amplifier guitar input, it is not compatible electrically and it is definitely possible to damage both devices. In any case you are doing it at your own risk.

@@TutoJam ohhh i see thankyou so much sir,sorry my English,,,so do i need 3.5 to 6.5 Jack to connect it? Or what i really need?

@TeriSanusi yep, I bought a 3,5 to 3,5 cable because my amplifier had a 3,5 aux input but if yours has 6,3 you can use an adapter

@@TutoJam sorry asking to much sir,, i cant find it on TH-cam,, can u explain how i plug my Jack? From my nux mighty lite mk2 to my another speaker

Don't be shy my friend I am happy if I can help you. Stay tuned on the channel, asap I will post a short to show you how I did it for myself