วีดีโอ

I’m so happy that this helped you and got you the information needed to get the job done. 🙌🏼😉

Completely understand. This tutorial is not for everyone. Hope you find a viable solution for you.

I believe so… It’s standard thickness for a butcher block top.

😊😊

Wow!! Wonderful to hear! 🙌🏼 Glad this worked for you. I actually need to redo mine 😏 Thank you for sharing your experience 💕

Glad it was helpful! It may have more to do with the tension on the line than anything else. Unfortunately I don’t know how to fix that. 🫤

Glad to help ☺️

Thank you as well!! 🙂

That wouldn’t hurt to try! 🙂

@TammysHomeTips 😎 👍🏻 I figure that's all a carpet cleaning machine does: applies water/cleaner, agitates it with a brush and vacuums it up. Just all with one machine instead of your hands AND one machine....a vacuum.

You are spot on ☺️🙌🏼😎

Awesome!! I’m glad it helped! ☺️🙌🏼

As per electrical codes, indeed, your best bet is to ground the mast, and the RG 6 cables accordingly in order to avoid any lightning strikes that will indeed damage your tv set. The very best grounding technique is a cold water pipe for the RG 6 cables, while a ground rod for the mast used to mount the tv antennas or system head end on. You can never have enough grounding. Also, when making a RG 6 connector, a pocket knife is all ya need, number one, and as far as crimping the ferral, a crimping tool is best suited to be used in that reguard. The much newer RG 6 connectors have a entirely different crimping tool as the ferrall are much longer than the ones times past. You can build cable tv system head ends which each tv antenna used is a cantilever mounted antenna cut to the frequency of the desired tv station to be recieved which goes into the system head end building and into the recievers, processors, and combines thenout into the system which uses trunk amplifiers, line extenders, and bridgers along with tap units to connect up cable tv subscribers which the tap units range from two port design to 4 port to 8 port designs in order to handle as many cable tv subscribers from one tap unit in the trunk line or trunk run.

Aw! Thanks 😊 I need to make some new videos 😅 Really appreciate your support!

Great idea! Mine is in my back yard and there is a tree there as well but you could absolutely make both sides look fabulous 🤓

It wouldn’t hurt to try it that way! It wouldn’t have worked for my place because of the incline on my driveway would probably make it hard for the rug to stay in place for me to clean it but I can see how it would work in a area without an incline. ☺️

Because ai put black on the backside it looks black from the outside. If you want something more decorative you can choose to use a thick but lighter color. Mine faces the backyard so this works for me

This is not really a spot cleaning approach

You can buy the Insulfoam at Lowe’s or Home Depot 🙂

Awesome!! I love how TH-cam gives us a platform to share ideas like this. Hope it helped!

Thank you 😍

I’ll let him know 😉

Good point 😅 It is officially called a Variable-Speed Oscillating Multi-Tool and unofficially called a universal tool. It’s a great thing to have!! 🤩

Thank you! Appreciate you!

If they are the flat metal clips you can go right over them but the larger clear plastic ones you can loosen one at a time and slip that one piece behind it then tighten it again before you move on to the next one. Just be sure not to over tighten the clip so you don’t crack the mirror. I have done this several times without issues.

Great idea!! Love it and thanks for sharing!

how do you get them home all wet?

@@tarynmarie34 That's what I was wondering. I wait for a super rainy day in the summer and first let the area rug soak up all that nice soft rainwater. Then I mix a little javex, warm water with my fav laundry detergent and I have a hard bristle broom that I clean my carpeted porch stairs with, and keep on sweeping the rug until clean, then if it doesn't continue raining, only then do I take the hose. I have been doing that for years and its works good. Then I get help and place the rug over the railing on my back deck. A day of very warm sunshine and the rugs is dry.

@maureenvalley7722 Sounds like you do an amazing job!! 🤩

This video is just showing how to do the curvature on the top inside of the door when framing. If you would like to know how to trim out the arched part of a door, you can check out my other video here Trim Molding For Arched Doorway Easy DIY th-cam.com/video/mUAHt8hW4XE/w-d-xo.html

Here is also the video of how to install the glass: EASY Glass Template and How to Install th-cam.com/video/v9atJlBq2tA/w-d-xo.html

Thank you for giving my video a view and sharing your feedback. The first pet of the video is the cordless faux blinds and the second part is about the corded ones. Sorry I didn’t make it more clear. I hope you were able to figure out your project. 🙏🏼

I'm also in the UK and tried searching for a metal squeeze. I only have a rubber one, so I'm unsure if that's suitable.

I used a rubber squeegee

That would be fine, this is just a deep clean 🙂

Thanks 🙂

Awesome! Glad it helped!!

Hope you’re able to get it figured out!!

Glad it helped! Thank you for letting know 😊

I used plenty of product but cleaning more often would be great 😉

The prep is where all the work is. Once it’s ready it doesn’t take long to do the blacktop so I can see you getting that part done in one afternoon or day depending on the length of the driveway. 🙌🏼

😊

Thank you ☺️

Thank you! It was the perfect solution for us. ☺️

Great point! I’ll be sure to include that as a point in future videos. Thank you so much and, yes, our little pooch with the shirt 👚is definitely the boss 😅

Yay! Glad to help. Wish you much success on your project!

🙌🏼🫶🏼👍🏼

Haha! Thank you, I think 😅 One of these days I’ll get the music figured out. Appreciate the feedback. Wishing you much success with your barn door project! 🙌🏼

You’re welcome...yes.. I meant that in a positive way- @@TammysHomeTips I like your style. 😊 I’ll let you know how I make out.

👍🏼🙃🙌🏼

Installed my doors today.. went smooth.... @@TammysHomeTips these S. Florida metal studs are a pain tho, I like wood studs better... my stud finder kept giving me false readings... all in all a fun project. New sub here.. you’re fun to watch.

@Reelaxing Awesome! Glad it worked out and thanks for the sub! 😊🙌🏼

Yeah… I was actually shocked at how many came up! Hopefully you’ll get 100 😉

I wish I could remember… 😔

Thank you!

Wishing you the best with your project! 😍

Awesome!! Love it when we can make something old new again 😍

Awesome!! Glad to hear it helped 😍

Sure! That could help to remove the excess moisture 👍🏼