วีดีโอ

Yes when loaded with evilnat CFW they are :)

Sir, I believe you misunderstood what is going on. I took a donor chip from another motherboard, so yes I did in fact replace it.

@@RedOverlord , если это так. замечательно. на видео это не видно, кажется что происходит обычный ребол, а не замена с донора. в любом случаи использовать старые чипы не очень надежно с тем учетом что данный чип склонен к деградации(электромиграции). нужно ставить новые детали!

@@user-zp3tc1zx9b not necessary, BGA chips can/will last a long time if the environment is good, for example... old game consoles 20 years old

@@user-zp3tc1zx9b new chips are not available. the original chip overheated so much that it died. I took a donor gpu from a regular xbox which should be perfectly fine, I used low temperatures for reballing and soldering.

​@@RedOverlord , я живу в России, и наша страна обложена санкциями как не какая другая, и не смотря на это я могу заказать такой оригинальный новый чип, не смотря на возраст и то что он давно снят с производства, я все равно могу это сделать. и это не алиэкспресс. в период с 2000-2009 год много разных компаний выпускали чипы с ошибочной микроархитектурой, которая приводила чипы к деградации/преждевременному старению(к так называемой электромиграции), перегрев/нагрев только катализатор, а не причина неисправности. данный дефект диагностируется очень просто, необходимо просто пропаять чип(до полного плавления припоя, можно даже подвигать чип для верности), если после этого начинает работать то чип на 100% с электромиграцией и нуждается в замене на новый. данные чипы nvidia также склонны к этому дефекту, как и много других из этого временного периода. перегрева при пайки боятся только чипы с напаянными на подложку кристаллом. так как их кристалл напаян на подложку на такие же шарики припоя только более маленького размера, и свободное пространство залито компаундом, который расширяется при нагреве, таким образом при достижении температуры плавления припой фактически выдавливается компаундом. и чип становится негодным. поэтому такие чипы желательно реболить на более легкоплавкий припой, на свинцово оловянный(180с) или на оловянно висмутовый. (138с). также не рекомендую использовать оплетку для удаления припоя, этот способ очень агрессивный, часто вызывает повреждения маски или самих дорожек. есть более простой, и более безопасный способ, необходимо пропаять нужные площадки сплавом "розе", после данный участок подогревается до 110-120с и обычной салфеткой(из нетканого материала) место протирается, весь припой остается на салфетке.

Custom firmware...

You are missing the point completely. This is a hobby of mine and a way to make money repairing different devices. I did not buy all this to replace one RSX on one PS3.

Yes only SYSCON training needed

What kind of ic that you use to lower the voltage?

@@kecapmantis3205 www.psx-place.com/threads/frankenstein-phat-ps3-cecha-with-40nm-rsx.28069/page-76#post-324546

I have an A00 with a 40nm €750

​@@RedOverlord don't you think this is overpriced?

@@RedOverlord i'm interested in buying thoose, i live in germany. Is the console modified in exactly the same way as the one shown here (especially, r the tantalum pcbs used)? what is the optical condition of the console you offer? how can we get in touch besides youtube? i have CECHB00 (the full black one 20 GB Modell), working perfectly in very good technical and optical condition. no heat problem and no graphics problem. but i read that you don't receive hardware for repairs. otherwise i would ask you to do a preventive replacement of the gpu on theese :D. i've heard that the B00 models tend to suffer from backwards compatibility after a rsx change (ps2 in particular), is this the case with the A00 models too?

@@frankyfife you can send me a DM on instagram @toinescustomsconsoles and we can talk there. yes built the same way. I live in the Netherlands ;) and yes A00 and B00 (COK-001) can have a bad ps2 side. one of mine has it too.

160c for a few minutes, then I assist with hot air around 220c

If you want to know what device that is, it's a Mechanic branded preheater plate.

First one

yeah haven't done alot of them but usually there is no problem thanks for providing me this IHS tool

Sorry, I'll try to keep that in mind for next time

@@RedOverlord aww thanks that’s great, much appreciated my friend

motorstorm

exactly :)

@@RedOverlord Nice.

its a GPU swap from a later slim model PS3. its to deal with the yellow light of death the original 90nm chips have. 40nm GPU's run cooler, use less power, and overclock way higher.

yes it is :) this is number five

you can contact me on instagram: @toinescustomconsoles and I can sell you one

Sure is, got it for a year and a half now I think. No complaints at all, nicer then the IR based systems

Thank you kief 🙏

In the Netherlands, I don't really do send ins. But I could probably sell you a system. Got multiple of the same model in this week

The programming, resistor changes, and the voltage lowering is to get the new chip running right. The black squares are capacitors I switch out as preventitive maintenaince. In the end I cut the IHS plate from the CPU so I can replace the thermalpaste underneath. Thanks for watching

@@RedOverlord I need to delid my ps3 also, but i'm afraid, i don't have any tools able to fit for the job :/

Thats right, in this case thats me. I make a system out of parts from different ps3's

I responded based on the thumbnail

@@Andr0-Zero we need ogx vids

Not really necessary, I linked all the info necessary and computer booter did alot of videos about this mod.

@@RedOverlordI’d love to watch it!

Thanks sir

Custom stencil made by my friend zzattack. I believe his stencils are available on his github page

there is a tutorial out there somewhere that tells you how to convert a retail xbox motherboard to chihiro. but you also need a chihiro chassis, its not just an xbox that powers it there are many sega specific parts that connect to the xbox board.

@@RedOverlord wow !! thanks for that , im gonna search i hope i can find it !! i have an xbox , thanksss

​@@netten2057 There are versions of Ghost Squad, Outrun 2 (Beta) and Virtua Cop 3, for XBOX 128MO RAM

Think you can run some chihiro games on an Xbox with a 128MB RAM mod

@@jm036 I don't know, but if there is a way to do it, I can do it. I also have a reballing machine and I can make the necessary modifications if there is a way , I didn't even know there was such a thing as Chihiro, I'm just now watching and studying it.

I did not actually, usually I do as a standard maintenance procedure but these looked perfect. customer can solder so if it becomes a problem he can swap them out.

@@RedOverlord Oh? To me it looked like several of the previously damaged capacitors had actually started outright bulging out or leaking after your 24 hour bake period. They looked bulged, I could see that much. That's on the donor board though, I think..

@@AnnaVannieuwenhuyse they were on the donor board

thank you very much! appreciate it :)

I see what you are saying! Probably a piece of cotton swab

​@@RedOverlord probably but it really look like solder to me but still a pretty good job overall 👌🏼

The original xbox revision 1.6 XGPU-B is better but its not backwards compatible. Other then that I dont think so

​@@RedOverlord The XBOX V1.6 has bugs, in 720p, 1080i and 16/9.

No, its kernel and bios are prepared to work only with the specified hardware. Its GPU doesn't even exist on the consumer market, it's a kind of GF4 prototype, game programming expects specific features from this GPU (which are not present in other desktop ones) the only thing you can do on this console is to upgrade the processor and RAM memory. The closest you can come to improving image quality is to adapt an HDMI mod directly to the test points on the motherboard, where you will get a clean, crystal-clear signal, superior to any HDMI mod using the standard cable connection. console. Version 1.6 was also entirely manufactured in China, and had major changes in production quality (for the worse). In my experience, version 1.0 ~ 1.1 does not have a very good analog signal processor, and from 1.5 onwards this processor is not so good again. The best image quality is more or less in 1.2 and 1.4, they also use the improved heatsink on the GPU that does not require a cooler (they are quieter) and accept practically all mods, you just need to find one that has not been damaged by the clock capacitor. Nowadays there are even watercooler solutions with 60mm radiators that are efficient for tdps of up to 45w, pico power supplies with efficiency of almost 90%, low noise, low ripple... so I understand that we have reached the sweet point in the console's life where we have a huge range of possibilities for improving it.

I'm sad that the hacking community has been BUYED by Sony and Microsoft, since the xbox one, we haven't seen anything cool, no modchips, jailbreaks, or cool mods.

thanks!

@@RedOverlord I never knew that Saga made a arcade cabinet using a modified xbox pcb. I thought that was neat! Thanks for the little info nugget! :D Btw this is Lord Virus. Nice to see you doing paid repairs at this high of a standard!

@@nice8D I knew that was you ;) can't fool me with name changes. thank you for the kind words

thank you!