Great video! I like the fact that you bought the plane for review. No induced bullshit! A good review under these conditions has much more weight. Much respect..... Thanks, Bill
Thanks for your feedback! its comments like this that keep us going! We have never been sponsored by any vendor and we wont ever. I have done reviews off and on for years now, and some sponsored and some not. The moment you receive anything for free you loose your soul, your voice, your integrity and become a servant to the vendor out of fear that any negative feedback will mean you never get anything free again, and the vendors know that as well. 100% unscripted, 100% un-sponsored.
Seeing the quality of your videos and your lack of subs is discouraging, so you got mine. I love other content, but good old "new model reviews" are what will keep me coming back day after day. Keep up the great work, hope those numbers go way up.
Well its true, We have only had the channel up for 4 months now. And we dont beg or nag for subs through the content. So basically we are intentionally not spamming our viewers. So slower sub growth is just a consequence of that choice and we are good with it!
Dude, great vid and very informative after this i am definitely going to pick one up and a flight vid will be on my channel ;) Cheers for the time you spent on this
was debating between this and the timber x, ended up getting the timber because i can swap in my other timber wing for superSTOL and it will also allow me to learn 3d. good video guys!
Really like your vids and the Extra 300 3D looks great. However, I fly on a well kept 1/2" grass field and have concerns despite the Horizon Q&A video stating " no problem " on grass. Would hate to remove the wheel pants and ruin the looks of the plane. If you've flown it on grass, how did it go?
Do the rudder hinges get glued or bolted? 20 years ago, those were CA hinges. (I don't expect a response, since THIS video is 1+ years old!) IF so, I appreciate it! 👍
You are asking a very hard question! Both are amazing in there own rights. The features on the bush mule, with differential thrust, reverse thrust, fpv, flaps and slow fly, the door that opens are amazing! But the extra 300 is pure sexy sleek design. In a perfect world i would have both. But, if i have to have one vs the other i would get the extra 300 with SAFE. Then i can learn 3d flight and just being honest.... she looks so amazing hanging from the ceiling.
Nice Video! How does it do in the wind?? I'm considering this plane but our field is always quite windy, anywhere from 10-20mph so I'm concerned this will get blown around too much.
I saw all of your videos and some of the planes you built didn't get there madin flight yet. I was hoping to see the blitz RC f4f wildcat in the air because its such a scale looking plane. As for the latch mechanism on the wing when the banana hobby guy folded and unfolded the wings he loosened the bolt a little before sliding the latch for the wings the tightened them back up before flight to lock in the wings.
We have been hiding from the cold! We will look into it, and if you should chose to promote or post us also in places you frequent we would be happy also!
You guys do the best unboxing on TH-cam. Very jealous of your workshop. Love this Extra 300 3D!
Great video! I like the fact that you bought the plane for review. No induced bullshit! A good review under these conditions has much more weight. Much respect..... Thanks, Bill
Thanks for your feedback! its comments like this that keep us going! We have never been sponsored by any vendor and we wont ever. I have done reviews off and on for years now, and some sponsored and some not. The moment you receive anything for free you loose your soul, your voice, your integrity and become a servant to the vendor out of fear that any negative feedback will mean you never get anything free again, and the vendors know that as well. 100% unscripted, 100% un-sponsored.
Seeing the quality of your videos and your lack of subs is discouraging, so you got mine. I love other content, but good old "new model reviews" are what will keep me coming back day after day. Keep up the great work, hope those numbers go way up.
Well its true, We have only had the channel up for 4 months now. And we dont beg or nag for subs through the content. So basically we are intentionally not spamming our viewers. So slower sub growth is just a consequence of that choice and we are good with it!
I love this channel....your thoughts and reactions are so real....just like when I get to open the boxes myself...
Great unboxing!
Very nice video! I will buy this little baster soon! Yep ! Really like your channel ✈️ 🛫💙
Thanks for the feedback!
Dude, great vid and very informative after this i am definitely going to pick one up and a flight vid will be on my channel ;)
Cheers for the time you spent on this
Very nice plane! I wont to get one and I wont to put my connector on the ESC. So I need to remove the cowling. It is glue one the fuselage? Tank you
was debating between this and the timber x, ended up getting the timber because i can swap in my other timber wing for superSTOL and it will also allow me to learn 3d. good video guys!
Brandon R
My dad has a timber x and imma get this plane
what should the servo arm be set at for aileron, rudder and elevator? what expo to use
can you explain how to do the CG on this, its way too tail heavy when i flew it. I am using 4s 3200 Lipo
Where did you place the battery. I’m using a 4 cell
Hey, what glue did you use for the rudder hinges?
With out a question, foamtac. They are the best!
@@angryzeppelin2750 Awesome, thanks! Just ordered the Extra, can't wait to get it in the air! It will be my first new plane in almost 4 years haha.
Looks very much like the ol FMS 1.4m extra 300, but with better hardware. Loved the FMS one but this ones even better
Good job Thanks New sub
nice review and contents. one question what difference between fms extra 300 and eflite extra 300?
Really like your vids and the Extra 300 3D looks great. However, I fly on a well kept 1/2" grass field and have concerns despite the Horizon Q&A video stating " no problem " on grass. Would hate to remove the wheel pants and ruin the looks of the plane. If you've flown it on grass, how did it go?
Do the rudder hinges get glued or bolted? 20 years ago, those were CA hinges. (I don't expect a response, since THIS video is 1+ years old!) IF so, I appreciate it! 👍
For the aileron and elevator hinges just put a strip of blendurm tape on the bottom side and you are good to go!
I know they're very different types of airplanes and price points, but would you rather pick this one or the Avios Bush Mule?
You are asking a very hard question! Both are amazing in there own rights. The features on the bush mule, with differential thrust, reverse thrust, fpv, flaps and slow fly, the door that opens are amazing! But the extra 300 is pure sexy sleek design. In a perfect world i would have both. But, if i have to have one vs the other i would get the extra 300 with SAFE. Then i can learn 3d flight and just being honest.... she looks so amazing hanging from the ceiling.
@@angryzeppelin2750 This is exactly what I thought...may have to get then both lol
Nice Video! How does it do in the wind?? I'm considering this plane but our field is always quite windy, anywhere from 10-20mph so I'm concerned this will get blown around too much.
I am finishing my 300. I bought the BNF version. How did you route the antenna wire?
i am 14 i can't believe my dad isn't getting me this i have been asking for so long
You guys should do a review on the E-Flite F-22 bnf basic.
DONE! :)
I saw all of your videos and some of the planes you built didn't get there madin flight yet. I was hoping to see the blitz RC f4f wildcat in the air because its such a scale looking plane. As for the latch mechanism on the wing when the banana hobby guy folded and unfolded the wings he loosened the bolt a little before sliding the latch for the wings the tightened them back up before flight to lock in the wings.
What glue did you use for the rudder ? Thanks
Foam-Tac
In the build video he mentioned using Foam-Tac to make it easier to cut out and replace the rudder in the future if needed.
Extra fun... I see what you did there.
Did you ever test fly this plane, hopefully on hard surface and grass? If so will there be a video?
I will be here in the next week or so. we have had so much rain i cant get out to film it.
Very Nice video ! Can you run Higher Mah 4s Batteries like 4s 4000 mah ??
Great point! Recommended are 3-4S 2200 - 3200 mAh LiPo
Hmmm timber x or extra 300... That is a sweet plane
Where have you guys been? You guys should join foam flyers on Facebook and share your TH-cam videos and I bet you will get more subscribers.
We have been hiding from the cold! We will look into it, and if you should chose to promote or post us also in places you frequent we would be happy also!
Hate that they went to all foam planes
time for cardio you was out of breath lol