How i fixed steering lock failure on a 370z

แชร์
ฝัง
  • เผยแพร่เมื่อ 15 ก.ย. 2024
  • Today i show you how i fixed my steering lock failure on my Z!
    Socials!
    / hayden.trainor

ความคิดเห็น • 32

  • @kailani112
    @kailani112 3 ปีที่แล้ว +1

    I did this w/o grounding the pink wire. I just put it in ACC mode and pulled the fuse and car starts but red key still shows up on dash.

  • @vasi2161
    @vasi2161 2 ปีที่แล้ว +1

    Hey do you leave the pin in and grounded wile you remove fuse or once grounded and in acc you can remove the pin then the fuse

    • @Revolution_Collective
      @Revolution_Collective  2 ปีที่แล้ว +1

      Ive pulled the pin out, once the fuse was removed!

    • @vasi2161
      @vasi2161 2 ปีที่แล้ว

      @@Revolution_Collective yes but did you leave it touching ground also or just grounded it and only the pin in

    • @Revolution_Collective
      @Revolution_Collective  2 ปีที่แล้ว

      @@vasi2161 it's all removed, once the car is in acc mode and the fuse is removed, the pin is no longer needed, so just get the car to turn over to acc, leave the pin in and go pull the fuse, once that's done you can remove the pin

    • @vasi2161
      @vasi2161 2 ปีที่แล้ว

      @@Revolution_Collective bro I get that but do you leave the screw driver touching the pin and frame work or can that be removed

    • @Revolution_Collective
      @Revolution_Collective  2 ปีที่แล้ว

      @@vasi2161 once it's in acc mode you don't need to be grounding anything, so no, no screw driver is needed

  • @thatonefifakiddd9360
    @thatonefifakiddd9360 2 ปีที่แล้ว +1

    I took the fuse off and it worked for 2 days and now it’s still hard to turn out of no where

    • @Revolution_Collective
      @Revolution_Collective  2 ปีที่แล้ว

      I have heard it doesn't always work, so you may need to replace the fuse unfortunately

  • @adama569
    @adama569 3 ปีที่แล้ว +1

    I hit it and still on lock mode

  • @aurora9252
    @aurora9252 3 ปีที่แล้ว +1

    How deep did you insert the pin into the wire? I'm trying to put my z into cc mode

    • @Revolution_Collective
      @Revolution_Collective  3 ปีที่แล้ว +1

      just enough that it kinda stays into the wire, youve got to get past the rubber basically

  • @adama569
    @adama569 3 ปีที่แล้ว +1

    Hey bro my car is stuck on lock mode I need help please ASAP

    • @Revolution_Collective
      @Revolution_Collective  3 ปีที่แล้ว +1

      Have you tried grounding the wire with a pin and screw driver?

    • @adama569
      @adama569 3 ปีที่แล้ว +1

      @@Revolution_Collective how do I do that ? Is it hard bro?

    • @Revolution_Collective
      @Revolution_Collective  3 ปีที่แล้ว +1

      @@adama569 easy man just need a pin for the pink wire and then just tap the pink wire with a screw driver and press some metal on the car

    • @adama569
      @adama569 3 ปีที่แล้ว +3

      @@Revolution_Collective hey bro turns out it’s something to do with the neutral safety switch

    • @Revolution_Collective
      @Revolution_Collective  3 ปีที่แล้ว +1

      @@adama569 oh okay, not sure what that is tbh

  • @ToxiccTwix
    @ToxiccTwix 3 ปีที่แล้ว +1

    I fixed it