Dear KM, Am very new to aquarium and have recently setup a 60ltr aquarium with 10 Guppies. Your videos are truly value add and are to the point. Many many thanks for your suggestions and videos. I sincerely wish you success.
Ami ek jon holiest,ami youtube e aquriam related video dekhi,tomar video aaj hothat youtube suggest korlo,tomar video gulo dekhchi,sotti soza sapta bhabe sohoje tumi jinish gulo darun banachi,keep it up
Excellent DIY Co2 and detailed explanation! Thanks. How will it spread into the aquarium from the defuser all over the aquarium, and how will plants located on the other side corner receive the CO2?
The water flow created by the filter in your aquarium will help the distribution of CO2 throughout the entire tank. You can also watch this video for more information: th-cam.com/video/-10qM6tyGjw/w-d-xo.html Thank you
this is a great video ! I have seen another similar video with no jelly in the bottle, just the water, sugar and yeast. What purpose does the jelly serve ?
What is the baking soda in this recipe used for? I have created similar reactor according to instructions from the other video (and it works well), but no baking soda was mentioned, so I'm just curious. Thank you for the detailed description in this video 👍
Here, baking soda, or sodium bicarbonate, acts as a buffer. In this method, alcohol is produced in the bottle during CO2 production, and the yeast-water solution gradually becomes acidic. Yeast can't tolerate too much acidity and dies. So, when we use baking soda, it stabilizes the pH of the yeast-water solution and prevents the yeast from dying too early. Thus, the duration of CO2 production increases. But if you use hard water, you can skip adding baking soda.
amazing diy co2 kit, but I am facing a problem with co2 diffuser. it is creating and diffusing the co2 with diy diffuser(used cigarette filter) but not with the one that I purchased from the aquarium shop. please help, looking forward for your reply on this
A ceramic CO2 diffuser requires a lot more pressure to work. So you have to wait a few more hours, so that enough pressure builds up in the bottle and then the diffuser will work properly. Also, you can increase the amount of yeast from 1/2 to 1 teaspoon, to increase CO2 production and the pressure as well.
I have completely same problem as you, the glass difuser does not work, so I created one from the cigarette filter. My impression is that the one from the cigarette filter works very well, so I don't need the other one anyway 🤷
What to do when we normally shut off the lights after say 6 hrs ,do the co2 supply to be continued or if not then the co2 form in the bottle doesn't break the bottles because of pressure
আপনার ভিডিও আমার কাছে ক্রমশই মূল্যবান হয়ে উঠছে। আপনার শেখানো aqua soil তৈরি করছি ।ম্যাক্রো এবং মাইক্রো লিকুইড সার তৈরি করব । আমার একটা প্রশ্ন আছে । co2 সিস্টেম খোলা বন্ধ করব কিভাবে? উত্তরের আশায় রইলাম । ধন্যবাদ ।🙏
ধন্যবাদ, এই CO2 সিস্টেম টা অনবরত চালু থাকবে, যতক্ষণ না জেলি সম্পূর্ণ শেষ হয়ে যাবে | এটা বন্ধ করা যাবে না আর বন্ধ করার চেষ্টাও করবেন না কারণ CO2 গ্যাস এর production এখানে continuously হতেই থাকবে | রাতে শুধু একটা air-stone বা power-head চালিয়ে একোয়ারিয়ামের জলের উপরিভাগ আন্দোলিত করবেন যাতে CO2 গ্যাস জল থেকে বেরিয়ে যায় | এতে একোয়ারিয়ামের মাছের কোনও ক্ষতি হবে না |
Apnar aquarium e gachpalar shonkha jodi medium hoy, tahole apni 1 bubble per second rate e CO2 supply korun. Er jonno 2 to CO2 generator babohar korun ar weekly 1 ta bottle er yeast water change korun, alternately.
Thanks Kaushik, i could get this system working at home. Only thing is the reaction starts slow, we need to wait for a few hours. Initially i wasn't patient enough. But then left it for good and during night sometime the reaction started well and its going great now. I have the CO2 in my aquarium and you saved me atleast 10k on full set up. Great going.
Hey am a big fan of urs. I have one question.You have used co2 diffuser in this video. I also seen video of yours on diy diffuser. Soo the point is bcz of money saving we use diy diffuser? If money is not a concern then we can buy diy diffuser which you used in this video?
Yes, in my videos I have shown different types of diffusers (commercial and DIY) that can be used with this DIY CO2 system. So, people can use any one of them according to their choice. thank you
Hello Dada...I have been using jelly mothod for quite some time and thanks to U I am able to enjoy pearling in my plants. I hv a 1.5 ft heavily planted aquarium. Problem is, first day the C02 supply is sufficient but after a day or two its reduced significantly. Plz suggest me something so that I hv a steady C02 supply.
Ok, do the following: 1. Check for leaks in the CO2 system by entirely submerging the system along with the diffuser into a bucket of water. If you see bubbles coming out of any joints, there is a leak, and you need to fix it accordingly. 2. Use 1/2 to 1 teaspoon of branded, good-quality yeast and use warm (not hot) water to activate it. 3. The CO2 diffuser also needs to be cleaned regularly, as its pores occasionally get clogged after continuous use. 4. Change the yeast solution weekly to maintain a stable CO2 supply in the tank. Thank you.
@@madebykm Thank U soo Much for ur invaluable inputs...I will do it accordingly...one mone thing, if I add one additional jelly bottle with T connector, will it boost the flow ???
Is there a way to control the amount of CO2 entering the aquarium. Any equipments you know of? I am thinking of using Tropica 3-in-1 diffuser and the rest as you suggested. We need to control inflow of CO2 depending on tank size, right?
Here, the CO2 production depends on the quality and quantity of yeast. So, you can control the CO2 production or bubbles per second (bps) rate by increasing or decreasing the amount of yeast. If 1/4 teaspoon of yeast does not produce enough CO2 for your tank, you can use 1/2 teaspoon of yeast to increase the bps rate. I have found (in a normal bubble counter) that 1/2 teaspoon of yeast can produce CO2 at a rate of 2 bubbles per second for about 10 days. Then the production of CO2 gradually decreases as well as the bps rate. So to provide CO2 in the tank at a steady rate, I recommend refreshing the yeast-water every week. And besides this method, you can also use a needle valve for fine-tuning.
@@madebykm Thank you. I really appreciate all your videos. Very helpful for me as a beginner. Personally, I think that the aquarium industry is full of overpriced products, your diy methods are very useful.
Daily CO2 ki supply tab tak di jani chahiye jab tak aquarium ki light ON rahega. Planted aquarium ke liye 8 ghante se 10 ghante tak light ON rakhna zaruri hai, isliye tab tak CO2 ki supply karna chahiye. Aur information ke liye video description dekhiye. Yeh bilkul safe hai, koi problem nehi hoga.
Hi I just prepared in same way having one doubt as I'm having easy life easycarbo liquid fertilizer as well so is it ok that im using both as fertilizer im using once in week
Hello, Could you please tell, is there is any problem, if we completely closed the bottle. Suppose we are not using this CO2 gas for a long time (after preparing). Looking for your reply
This is different from a pressurized CO2 system where the CO2 gas can be stored. In this method, the yeast will continuously produce CO2 in the bottle during the fermentation process, and this CO2 production cannot be stopped. Forcibly stopping the flow of CO2 gas will completely damage the CO2 kit.
hi sir, im using instant dry yeast and its working following your steps, its been only 2 days so do you have any idea how frequently i have to change the yeast or else what do i need to observe to know when to change the yeast..i am also using your diy diffuser with cigg filters
Dada amio same process a kore6i khub bhalo co2 produce kor6e kintu koyek ghonta por aquarium er jol ta khub cloudy lag6e... ki hote paare bole apnar mone hoi???
@@madebykm sir ,kya diy co2 24x7 chala sakte hein, is me plants or fish ko koi khatra to nahi? Aur sir ye bhi bataye kya jelly ka mishran boil water me 1 minut tak stire krna hai ya fir warm water me? Thanks so much
Thanks. Planted tanks e continuous CO2 er supply thakle kono problem hobe na. Raate shudhu akta air-stone chaliye rakhte paren ba joler surface agitation ta increase korte paren. Ami egulor kichui kori na ar kono problem aj porjonto hoyni. Ar DIY CO2 diffuser er video ami banabo.
amar planted aquarium e maach, shrimp ar snails ache, ar akhono porjonto CO2 poisoning e kichu more ni. ar raate akta air-stone / power-head er shahajje surface agitaion jodi barano jay tahole 100% kono problem hobe na.
Hello km I made my diy co2 but after some times the co2 gets overflow in 70% bottle all the bubbles come in that what to do is there any mistake in mixing proportion please help
The amount of jelly powder, yeast and sugar I used here cost Rs. 100 approx. I already had the rest of the equipment like empty bottles, check valves, air tubing, CO2 diffuser etc.
You can also use Gelatin, but the problem is jelly made using gelatin usually melts at outside / room temperature (25°C-40°C). Gelatin works well in cold environments (
@@madebykm Bro I made jelly With only Jelly crystals powder. I didn't receive any premix stuff. I have around 25C temp. And the jelly completely melted and mixed with yeast solution. (I refrigerated 24hours)
I think the jelly powder you used was gelatin based, so it melted at room temperature. You can see the description box where I have given the link to the product I use to make the jelly. You can also watch my other DIY CO2 video where I used agar agar to make jelly and you can follow that method next time.
Awesome video brother. 😃👏 you are great. Bas co2 production and on off controll ki jarurat hai. Because bas lighting ke time hi Co2 dena acha hai. How can we control co2 flow and production? Instead of letting yeast eat the whole jelly, we may feed them from time to time in a fixed proportion.
Choto bottle e leakage ache kina age dekhun, ar diffuser ki use korchen? Ceramic diffuser use korle, bubbles berote ektu deri hobe karon egulor kaj korte onek pressure er dorkar hoy. Bottle e sufficient pressure toiri hole tobe diffuser theke bubbles berobe.
Any brand of jelly powder will work. The product I used had individual packets of jelly mix and premix powder. Products from other brands may only contain one packet of jelly powder. Check out the link to the product I used in the description.
The product I used had individual packets of jelly mix and premix powder. Each 90 gm box contains a separate packet of 80 gm Jelly Mix and 10 gm Jelly Premix powder. Products from other brands may only contain one packet of jelly powder.
Hello kaushik , i have used this method Initially it worked great but after few hours it stopped giving bubbles. I have used superglue and silicon to seal everything. The Yeast bottle is sending bubbles to the Bubble counter bottle but after a while it stops . I'm clueless
@@madebykm hey , I'm using ceramic tile diy diffuser and the generator is working fine now . I made wrong (7g yeast) measurements which resulted in too much CO2 also caused pipes to explode but now they're working fine but seems like the CO2 produced is not sufficient for the plants , before they pearled but now they don't . My tank is 60 L
Well, you can use two generators like this and use 1/2 teaspoon of yeast in each bottle. Then periodically change the yeast water in one generator. This will be enough for a 60L tank, unless you have very high intensity lights or a high tech tank.
@@madebykm oh okay kaushik , I'll give it a try . I just now checked the generator has stopped working . Seems like it's not producing enough pressure again , it's just been 2 1/2 days . What should I do?
Osonkho dhonnobad dada. asole ami tomar suggested power filter diffuser ta use kr6lm but juga onk ta block hye jy. Amio neo diffuser ta fu dyechilam onk pressure lgchilo tai vablm etto pressure e bottle blast na kore
Very informative video. I am looking into producing CO2 at a rate of 200cc's per minute as an attractant in a mosquito trap. This will be set outdoors and run continuously. Would I still benefit from using jelly crystals? Once again, thank you so much
Thank you. My research is pointing me to try a 7 gallon black bucket, insulated to hold a more consistent temperature. I'll have to experiment from there. A voice in my head wants me to use this as a way to make some good ale brews but that would be stepping too far over the line for public service. However for personal aquarium use for people interested in home brew, it might make aquarium maintenance more enjoyable. Cheers! ,🍻
![[Gegagedigedagedago] NEW Help Gegagedigedagedago Nugget escape from Nikocado Avocado Challenge](http://i.ytimg.com/vi/hJWnwRC2Fz8/mqdefault.jpg)
This video has English subtitles. Turn it on from video settings [CC]…
আপনার ভিডিও দেখে সত্যি অনেক কিছু শিখছি।
মাইক্রো ও ম্যাক্রো ফার্টিলাইজার আপনার ভিডিও দেখেই বানিয়েছি আর ব্যবহার করছি, ভালো ফল পাচ্ছি।
ধন্যবাদ আপনাকে
আপনাকে অনেক ধন্যবাদ
Dear KM,
Am very new to aquarium and have recently setup a 60ltr aquarium with 10 Guppies. Your videos are truly value add and are to the point. Many many thanks for your suggestions and videos.
I sincerely wish you success.
Thank you so much
You deserve more likes and subscribers bro 👍🏻 impressed with your to the point neat presentation
Thank you so much 👍
A complex process explained meticulously. Great job Bro. 🙂
Thanks a ton
My heartful thanks to you, Sir. Finally I could make it.
Idk what this dude is fully saying but he spoke enough English worlds to understand the point of the video😂 great video
You can turn on English subtitles for this video. I made another video on DIY CO2 in English, you can also watch that video. Thanks 😀
Ami ek jon holiest,ami youtube e aquriam related video dekhi,tomar video aaj hothat youtube suggest korlo,tomar video gulo dekhchi,sotti soza sapta bhabe sohoje tumi jinish gulo darun banachi,keep it up
Thank you dada 😊
@@madebykm allweys wellcome
Excellent DIY Co2 and detailed explanation! Thanks. How will it spread into the aquarium from the defuser all over the aquarium, and how will plants located on the other side corner receive the CO2?
The water flow created by the filter in your aquarium will help the distribution of CO2 throughout the entire tank. You can also watch this video for more information:
th-cam.com/video/-10qM6tyGjw/w-d-xo.html
Thank you
Darun dada.... thank u eta dekhanor jonno....onekdin wait korechilam ei video tar jonno...thanx a lot❤️
Ha, onekdin lege galo eta banate, ashole ektu experiment korchilam eta niye :-)
What an amazingly simple and professional explanation man. ❤
Glad you liked it
Achhe se har step ko explain kiya ..thanks
Thank you 😊
this is a great video ! I have seen another similar video with no jelly in the bottle, just the water, sugar and yeast. What purpose does the jelly serve ?
Please watch this video. I have explained it all here - th-cam.com/video/k1OqGMxjsBo/w-d-xo.html
Thanks.
It limits reaction only on top layer
Hindi is quite pure dude, keep it up with the DIY. One subscriber added.
Thank you 😊
Thank you for the informative video.
I have 156 litter tank. How much co2 generator do I need?
You are too good Kaushik... simple, inexpensive and very effective... god bless:-)
Thanks a lot 😊
Sir, after poring the hot jelly water mixture in the plastic bottle, it will damage the bottle. Do I have wait before poring.
What is the baking soda in this recipe used for? I have created similar reactor according to instructions from the other video (and it works well), but no baking soda was mentioned, so I'm just curious. Thank you for the detailed description in this video 👍
Here, baking soda, or sodium bicarbonate, acts as a buffer. In this method, alcohol is produced in the bottle during CO2 production, and the yeast-water solution gradually becomes acidic. Yeast can't tolerate too much acidity and dies. So, when we use baking soda, it stabilizes the pH of the yeast-water solution and prevents the yeast from dying too early. Thus, the duration of CO2 production increases. But if you use hard water, you can skip adding baking soda.
U r really great at explaining every step Sir.
I have one question... how to stop CO2 in the nite
Just disconnect the tube coming out of the big bottle to the small bottle at night. At the connector....
amazing diy co2 kit, but I am facing a problem with co2 diffuser. it is creating and diffusing the co2 with diy diffuser(used cigarette filter) but not with the one that I purchased from the aquarium shop. please help, looking forward for your reply on this
A ceramic CO2 diffuser requires a lot more pressure to work. So you have to wait a few more hours, so that enough pressure builds up in the bottle and then the diffuser will work properly. Also, you can increase the amount of yeast from 1/2 to 1 teaspoon, to increase CO2 production and the pressure as well.
I have completely same problem as you, the glass difuser does not work, so I created one from the cigarette filter. My impression is that the one from the cigarette filter works very well, so I don't need the other one anyway 🤷
What to do when we normally shut off the lights after say 6 hrs ,do the co2 supply to be continued or if not then the co2 form in the bottle doesn't break the bottles because of pressure
is it necessary to add the 2nd bottle which us filled with water.. If I avoid it, will it make any problem???
আপনার ভিডিও আমার কাছে ক্রমশই মূল্যবান হয়ে উঠছে। আপনার শেখানো aqua soil তৈরি করছি ।ম্যাক্রো এবং মাইক্রো লিকুইড সার তৈরি করব ।
আমার একটা প্রশ্ন আছে । co2 সিস্টেম খোলা বন্ধ করব কিভাবে? উত্তরের আশায় রইলাম । ধন্যবাদ ।🙏
ধন্যবাদ, এই CO2 সিস্টেম টা অনবরত চালু থাকবে, যতক্ষণ না জেলি সম্পূর্ণ শেষ হয়ে যাবে | এটা বন্ধ করা যাবে না আর বন্ধ করার চেষ্টাও করবেন না কারণ CO2 গ্যাস এর production এখানে continuously হতেই থাকবে | রাতে শুধু একটা air-stone বা power-head চালিয়ে একোয়ারিয়ামের জলের উপরিভাগ আন্দোলিত করবেন যাতে CO2 গ্যাস জল থেকে বেরিয়ে যায় | এতে একোয়ারিয়ামের মাছের কোনও ক্ষতি হবে না |
Hello I' am Manminder Singh from Nabha Punjab very nice video
Thanks and welcome
Apnar video khub bhalo laglo. Amar tank size holo 30 inch by 18 inch by 12 inch. 1 ta dyi C02 setup ki sufficient???
Apnar aquarium e gachpalar shonkha jodi medium hoy, tahole apni 1 bubble per second rate e CO2 supply korun. Er jonno 2 to CO2 generator babohar korun ar weekly 1 ta bottle er yeast water change korun, alternately.
Thank you Dada.
Nice video dada ekta question chilo eta bananor samai kono vabe jodi bottle ta leak kore tahole ki explode howar chance thake? Please help
Na
How frequently should i change the jelly?
Thanks Kaushik, i could get this system working at home. Only thing is the reaction starts slow, we need to wait for a few hours. Initially i wasn't patient enough. But then left it for good and during night sometime the reaction started well and its going great now. I have the CO2 in my aquarium and you saved me atleast 10k on full set up. Great going.
That’s good 👍
How do you control the Co2 flow in aquarium? as Co2 is not required for full 24 hrs.
I don’t control CO2, it runs 24/7
How much days it works in one time
Hey am a big fan of urs. I have one question.You have used co2 diffuser in this video. I also seen video of yours on diy diffuser. Soo the point is bcz of money saving we use diy diffuser? If money is not a concern then we can buy diy diffuser which you used in this video?
Yes, in my videos I have shown different types of diffusers (commercial and DIY) that can be used with this DIY CO2 system. So, people can use any one of them according to their choice. thank you
Hello Dada...I have been using jelly mothod for quite some time and thanks to U I am able to enjoy pearling in my plants. I hv a 1.5 ft heavily planted aquarium. Problem is, first day the C02 supply is sufficient but after a day or two its reduced significantly. Plz suggest me something so that I hv a steady C02 supply.
Ok, do the following:
1. Check for leaks in the CO2 system by entirely submerging the system along with the diffuser into a bucket of water. If you see bubbles coming out of any joints, there is a leak, and you need to fix it accordingly.
2. Use 1/2 to 1 teaspoon of branded, good-quality yeast and use warm (not hot) water to activate it.
3. The CO2 diffuser also needs to be cleaned regularly, as its pores occasionally get clogged after continuous use.
4. Change the yeast solution weekly to maintain a stable CO2 supply in the tank.
Thank you.
@@madebykm Thank U soo Much for ur invaluable inputs...I will do it accordingly...one mone thing, if I add one additional jelly bottle with T connector, will it boost the flow ???
Yes, you can use two jelly bottles and change the yeast solution in one bottle every week alternately. Thank you.
@@madebykm ok, Thank U again...Keep teaching us new DIY ways...My best wishes to U 🙏🏻
Yes, thanks 👍
I am successful , your method so helpful...
Thank you 😊
How long it will take to generate bubble from the small bottle after full set up ??? Thank U KM, Ur video inspired me to make DIY Co2 system.
If everything is OK, the bubbles should come out within an hour. Thanks.
do we need any special kind of tubing for CO2 or will the regular airline tubing do the job?
Good quality silicone airline tubing (4mm ID x 6mm OD) will be fine, but it’s best to use CO2 resistant Polyurethane (PU) tubing.
Ary wha Kia bat hai Bhai ap Hindi Achi bol layte ho next video bhi Hindi me hi banana ap kay ideas Kamal hotey hin
Thik hai, thank you 😊
Just awesome Bro ❤
Thanks ✌️
Tq brother it was so money saving idea
You’re welcome 😇
jely mix r jely pre mix ta kon powder aktu bollay khub vlo hoto .
Oi dutoi packet er moddhe thake, alada kore kichu kinte hobe na. Details er jonno video-r description dekhun.
Dear Kaushik how we can spread bubbles across the tank or any diy reactor. kindly make some video on this
Please watch my DIY CO2 diffuser video, thanks.
Is there a way to control the amount of CO2 entering the aquarium. Any equipments you know of? I am thinking of using Tropica 3-in-1 diffuser and the rest as you suggested.
We need to control inflow of CO2 depending on tank size, right?
Here, the CO2 production depends on the quality and quantity of yeast. So, you can control the CO2 production or bubbles per second (bps) rate by increasing or decreasing the amount of yeast. If 1/4 teaspoon of yeast does not produce enough CO2 for your tank, you can use 1/2 teaspoon of yeast to increase the bps rate. I have found (in a normal bubble counter) that 1/2 teaspoon of yeast can produce CO2 at a rate of 2 bubbles per second for about 10 days. Then the production of CO2 gradually decreases as well as the bps rate. So to provide CO2 in the tank at a steady rate, I recommend refreshing the yeast-water every week. And besides this method, you can also use a needle valve for fine-tuning.
@@madebykm Thank you. I really appreciate all your videos. Very helpful for me as a beginner. Personally, I think that the aquarium industry is full of overpriced products, your diy methods are very useful.
Thanks 👍
How did your sugar solution set ? I put the solution in the fridge for 24 hours and when i took it out, the gel just melted .any idea?
Too muchh helpful. Thank you sir
👍
Dada ami ai process a korachi gas o generate hocha kintu defuser deay berocha na 24 house holo. Kotokhon time lagay defuser deay berotay
ভারি সুন্দর! এবং উপযোগী ।
ধন্যবাদ
Jelly mix ta bujhlam but jelly premix ta ki jodi ektu bolen dada.
জেলি পাউডারের প্রতিটি 90 গ্রাম বক্সে একটি 80 গ্রাম জেলি মিক্স এবং একটি 10 গ্রাম জেলি প্রিমিক্স পাউডার প্যাকেট ছিল। ওগুলো আমি আলাদা বাটিতে রেখেছিলাম।
Suprb result but plz suggest diffuser DIY diffuser not iffective
You can use any glass ceramic diffuser. You can also watch my DIY CO2 diffuser video.
bohot hi badhiya video
Thank you
Thank you sir 👍👍 aur Daly kitne? hours CO2 use karun aur ghar me chohte bache hai kuch proble nai hoga na?
Daily CO2 ki supply tab tak di jani chahiye jab tak aquarium ki light ON rahega. Planted aquarium ke liye 8 ghante se 10 ghante tak light ON rakhna zaruri hai, isliye tab tak CO2 ki supply karna chahiye. Aur information ke liye video description dekhiye. Yeh bilkul safe hai, koi problem nehi hoga.
@@madebykm thank you sir
Do we have to mix agar agar powder in hot boiling water or we can add it later also when the water cools down a bit?
dada super shudh hindi.......and great content
Dhanyavaad 😀
Hi I just prepared in same way having one doubt as I'm having easy life easycarbo liquid fertilizer as well so is it ok that im using both as fertilizer im using once in week
Yes you can
Thank u for the video sir..
Welcome
Amazing video respect🙏
Thank you
Hello, Could you please tell, is there is any problem, if we completely closed the bottle. Suppose we are not using this CO2 gas for a long time (after preparing). Looking for your reply
This is different from a pressurized CO2 system where the CO2 gas can be stored. In this method, the yeast will continuously produce CO2 in the bottle during the fermentation process, and this CO2 production cannot be stopped. Forcibly stopping the flow of CO2 gas will completely damage the CO2 kit.
hi sir, im using instant dry yeast and its working following your steps, its been only 2 days so do you have any idea how frequently i have to change the yeast or else what do i need to observe to know when to change the yeast..i am also using your diy diffuser with cigg filters
Ok, now you only have to change the yeast water once a week. Thank you.
Dada amio same process a kore6i khub bhalo co2 produce kor6e kintu koyek ghonta por aquarium er jol ta khub cloudy lag6e... ki hote paare bole apnar mone hoi???
Ogulo CO2 er micro bubbles noi to? Akbar dekhun, CO2 er micro bubbles thekeo erokom hote pare.
@@madebykm ektu gholate lag6e mane bacterial bloom a jmon hoi kintu eta toh 1 yrs purono setup.....
Na dekhe bola mushkil, ami kokhono erokom problem face korini ba onno keu amake boleni…
Dear kaushik , nice video , is there any chances of bottles explode
No, please see the description box for more information. Thanks.
@@madebykm sir ,kya diy co2 24x7 chala sakte hein, is me plants or fish ko koi khatra to nahi? Aur sir ye bhi bataye kya jelly ka mishran boil water me 1 minut tak stire krna hai ya fir warm water me? Thanks so much
1. Haan chala sakte hain, mera to 24/7 chalta hai, abhi tak koi problem nehi hua hai.
2. Haan, boiling water me maximum 1 min tak.
@@madebykm thanks sir
👍
Hello kausik
I was wondering how often the jelly should be replaced?
Anyway nice method
Jelly should be replaced every 4-5 weeks. Thank you.
Sir, আপনাকে অসংখ্য ধন্যবাদ,
👍
Very informative video thanks
Thank you
Awesome..Bro..👍👍👍
Thanks
Love u😘🙂
Thank you
Bro how long does it take to produce co2 after adding yeast mix water?
CO2 kit le our centric acid used kare to kesa rahega apka kya keha he Lekin vo thoda mehnga he
Vo ek alagsa method hai, use kar sakte hain, lekin vo method is se mahenga hai aur 1-2 weeks tak chalega.
Sir for jelly .. all i can find is blue berry flavoured jelly powder .. is it ok to use it ? Or does it harm anything because of its flavour ?
No problem, you can use it.
@@azra3l70 you creation this steps co2 is working well caments please
All ready I subscribe
Thank you 😊
How many days this work sir i have a small Planted tank and only for java moss and anubias i add in this tank
The jelly will last 4-5 weeks
Super presentation bro🎉
Thank you
Do I need instant dry yeast or active dry yeast?
Use active dry yeast
Very nice....
Thank you
Great vdo 👍🏻
1) janar iche j... continuous CO2 supply thakle kono issue hobe na???
2) diy diffuser r kono idea share korle r o valo lagto...
Thanks. Planted tanks e continuous CO2 er supply thakle kono problem hobe na. Raate shudhu akta air-stone chaliye rakhte paren ba joler surface agitation ta increase korte paren. Ami egulor kichui kori na ar kono problem aj porjonto hoyni. Ar DIY CO2 diffuser er video ami banabo.
Tank mach thakleo problem nei , sara raat chalele???
amar planted aquarium e maach, shrimp ar snails ache, ar akhono porjonto CO2 poisoning e kichu more ni. ar raate akta air-stone / power-head er shahajje surface agitaion jodi barano jay tahole 100% kono problem hobe na.
@@madebykm thanks 👍🏻
@@madebykm ei check valve ta kothay pawa jabe r etar naam ta please janaben...ami korechi but reverse flow hoche.... please 🙏
Great informative videos, just setupy first planted aquarium.Can you please tell me, how long does it exists?
4-5 weeks
Nice one
Thank you 😊
Hello km I made my diy co2 but after some times the co2 gets overflow in 70% bottle all the bubbles come in that what to do is there any mistake in mixing proportion please help
Can you plz tell what was the price came to make this diy co2
The amount of jelly powder, yeast and sugar I used here cost Rs. 100 approx. I already had the rest of the equipment like empty bottles, check valves, air tubing, CO2 diffuser etc.
Bro can I use gelatin instead of Jelly premix?
You can also use Gelatin, but the problem is jelly made using gelatin usually melts at outside / room temperature (25°C-40°C). Gelatin works well in cold environments (
@@madebykm Bro I made jelly With only Jelly crystals powder. I didn't receive any premix stuff. I have around 25C temp. And the jelly completely melted and mixed with yeast solution. (I refrigerated 24hours)
I think the jelly powder you used was gelatin based, so it melted at room temperature. You can see the description box where I have given the link to the product I use to make the jelly. You can also watch my other DIY CO2 video where I used agar agar to make jelly and you can follow that method next time.
@@madebykm Thank you so much KM!
👍
Great! Have you used liquid co2? I know API, Flourish Excel. Can you tell which brand worked for you?
Flourish Excel is good
Khoob bhalo
Thank you 😊
just awesome,love you
Many many thanks
Awesome video brother. 😃👏 you are great. Bas co2 production and on off controll ki jarurat hai. Because bas lighting ke time hi Co2 dena acha hai. How can we control co2 flow and production? Instead of letting yeast eat the whole jelly, we may feed them from time to time in a fixed proportion.
Thank you bro. This is the only thing that can not be controlled here.
Dada ami sob follow kore korechi,co2 produce o hoche, but choto bottle thke aquarium e jachena. Ki problem bujhte pr6ina.
Choto bottle e leakage ache kina age dekhun, ar diffuser ki use korchen? Ceramic diffuser use korle, bubbles berote ektu deri hobe karon egulor kaj korte onek pressure er dorkar hoy. Bottle e sufficient pressure toiri hole tobe diffuser theke bubbles berobe.
Hi please help , jelly is still in liquid form after 24 hours i did every step in the video properlu
Can I use gelatin powder?.. Please reply
Gelatin works well in cold environments (
Am not getting this jelly anywhere in place. Do u have any website to buy?
Please check description
Gelly kitne dino tak chalega yani kab replace karna padega ??
Jelly 4-5 weeks tak chalega
Thank you so much
You're welcome
Dada how long this jelly method CO2 system will last ? Plese let me know
4-5 weeks
Hallo, can I use jelly crystal powder and sugar only with out jelly premix powder
Any brand of jelly powder will work. The product I used had individual packets of jelly mix and premix powder. Products from other brands may only contain one packet of jelly powder. Check out the link to the product I used in the description.
Hello sir, does jelly premix powder come with jelly powder ,or should i buy it,what if i do not put jelly premix, please help sir me ,thanks
The product I used had individual packets of jelly mix and premix powder. Each 90 gm box contains a separate packet of 80 gm Jelly Mix and 10 gm Jelly Premix powder. Products from other brands may only contain one packet of jelly powder.
@@madebykm thank you sir ,im going to make this soon
👍
Check valve kaha milega ❓
Love your content
Thank you
Jelly kithne din tak use karna hi plz answer me
30 din
I have 3 gallon tank it will work
Liquid carbon is sufficient for such a small tank.
Nice video
Thanks
Hello kaushik , i have used this method
Initially it worked great but after few hours it stopped giving bubbles. I have used superglue and silicon to seal everything. The Yeast bottle is sending bubbles to the Bubble counter bottle but after a while it stops . I'm clueless
What type of CO2 diffuser are you using?
@@madebykm hey , I'm using ceramic tile diy diffuser and the generator is working fine now . I made wrong (7g yeast) measurements which resulted in too much CO2 also caused pipes to explode but now they're working fine but seems like the CO2 produced is not sufficient for the plants , before they pearled but now they don't . My tank is 60 L
Well, you can use two generators like this and use 1/2 teaspoon of yeast in each bottle. Then periodically change the yeast water in one generator. This will be enough for a 60L tank, unless you have very high intensity lights or a high tech tank.
Also check out my DIY CO2 Diffuser video and use an Internal Filter CO2 Diffuser. It will work best with this DIY CO2 method.
@@madebykm oh okay kaushik , I'll give it a try . I just now checked the generator has stopped working .
Seems like it's not producing enough pressure again , it's just been 2 1/2 days . What should I do?
Sir non return valve ko nahe lagaye to chalega kya sir
Non return valve aquarium ke paani ko bottle me jaane se rokta hai, isliye iska use karna zaruri hai.
dada co2 diffuser e pressure besi lage toh bottle blast hoye jabe na toh?
Na
kn diffuser ta best hbe ek2 jodi link provide krte. premium holeo problem nei but tomar expertise matter kre
Eirokom akta simple diffuser use korte paro - amzn.to/49xTlVe
Ar eita premium - amzn.to/48ASjH1
DIY CO2 er khetre khub bhalo kaj kore.
Osonkho dhonnobad dada.
asole ami tomar suggested power filter diffuser ta use kr6lm but juga onk ta block hye jy.
Amio neo diffuser ta fu dyechilam onk pressure lgchilo tai vablm etto pressure e bottle blast na kore
Bhai eta winter e kaaj korbe ?
btw great info 👌
ha kono problem hobe na, jodi winter e production ektu kom hoy, tahole yeast er poriman ektu barano jete pare.
@@madebykm ar bhai jelly crystal online chhara emni bazar e ki available thake ?
ha egulo easily available.
@@madebykm thanks bhai
Can I use 1 jelly mix powder packet?
Very informative video. I am looking into producing CO2 at a rate of 200cc's per minute as an attractant in a mosquito trap. This will be set outdoors and run continuously. Would I still benefit from using jelly crystals?
Once again, thank you so much
This Jelly Crystals method works very well but it is only for aquarium use. Thank you.
Thank you. My research is pointing me to try a 7 gallon black bucket, insulated to hold a more consistent temperature. I'll have to experiment from there. A voice in my head wants me to use this as a way to make some good ale brews but that would be stepping too far over the line for public service. However for personal aquarium use for people interested in home brew, it might make aquarium maintenance more enjoyable. Cheers! ,🍻
👍
Very good video bro any danger like gas why asking this question my aquarium is near by tv
Thank you bro. No, it is absolutely safe, just make sure that the flow of CO2 gas is not blocked, otherwise the bottle may explode.
@@madebykm like any leakege it can explode
Not for leakage, if the flow of the CO2 is blocked.