Thanks for the reply Josh..I am enclosing a partial area of a patio to accommodate a sitting room for a severely handicapped person abd I don't have the height to get a regular door there so I'm thinking that I nay have to build one. It will be a sliding exterior for wheelchair access..
@@tonyalangdon763 lol, we have all been there. Maybe you could edge glue a 6" piece on both the top and bottom to keep the symmetry... I think that may be the least noticeable fix but maybe you will think of something better.
@@JoshWrightWoodworking that makes sense, I'll work on that. I made this shed and doors from skids, would it be possible to share a pic with you. I measure the top board, 7'2", I still did 6'2"
Pro-tip: as you were assembling the door, you were wiping the glue spill out off, after clamping everything together, let the bead of glue dry then just snap it off later. This will keep you from having to sand to get all the glue smear off and your whole surface will stay plumb. Just a light sanding will clean up where the glue was.
Box fan with a home air filter zip tied to the intake end of it! Got that one from a friend who would stick it by their door and brush their cat in front of it. That cat is larger than a raccoon. And we have some big raccoons in the area
Same as mine, though I did once tape a regular home-vacuum hose to my orbital sander and then twist tie the tape around the dust chute of the sander when I was sanding paint off a door. I sort of had to do that to prevent the paint from clumping onto the sanding disc.
Door blanks like this are going for $380+ in many places. I know, because I’ve been looking for a door for the cabin I’ve been remodeling. Exceptional value in making these yourself. Good job!
Great job buddy, you have inspired this 56 year old to try my hand at making a set of doors for my study. Good to see a young man working hard. you are a true craftsman
Bro, I clicked on this video after seeing your comment (which was apparently the first one). He has a table saw, mitre saw, band saw and enough clamps what else do you need for this. Me: trying to figure out how to complete a project with my only tool - the circular saw! 🤪
@@soyythomas well I guess on the majority of videos I watch it seems like everybody has a warehouse full of tools. This guy has enough to get by but not an overabundance.
Wow, finally, a video that shows you how to make a basic interior door with basic tools. Thank you, sir, for taking the time to show us that it can be achieved. I need to replace all of my interior doors , nd with the help of your video, it will now be possible for this 64 yr old female to finally start this project. 👏👍
I have done this before, and it works great. A couple of things you might want to add to your shop to make your life easier is a couple of folding saw horses and a 1/2 pc of plywood to make an offload table, and a rolling stand to feed. I do a lot of stuff on job sites rather than in a shop, so I have had to make do a lot, but anytime you get stuff over 2-3ft long having a little extra support makes it easier, safer, and gives you a better product. But that said I really enjoy both the way you are doing things, and the way you explain them. As a teacher I enjoy watching others that teach, and explain things in a simple understandable way. It doesn't take a genius to make complicated well complicated, but it does take one to simplify things.
Very nice job Josh. So nice to see such a young man with these skills! Never lose respect for your power tools as you continue to build your skills. Consider always using a push stick no matter what your depth of cut is! My rule of thumb (why I still have two at 73 years old) is to never allow my hand to pass over the blade on my jointer and table saw no matter what the depth of cut is set at. Enjoyed your vid! John
I use that same rule. My dad worked for a man when I was kid that built gazebos. One day the man was cutting a large rabbit in a 4x4 cedar post on the table saw. He was guiding the board over the blade with his hands, not really thinking much of it, I guess, because the blade was only cutting through half the thickness of the board. However, there a really bad knot in the board and when the dado blade hit it , the board pretty much exploded and his hand went right down on the blade. Lost his pinky, ring finger and a quarter of his palm. The stuff of nightmares.
Nice to see you leaving the panels floating - many people glue and nail/screw everything together, forgetting about seasonal wood movement (and boy do we get plenty of that in the UK!). Also good to see a small table saw being used for both joinery and re-sawing. I love learning, and taught me quite a bit, thanks!
I just found your channel. Im impressed. Real world tools, real world shop, awesome builds. You've earned my subscription. Keep up the good work brother.
The way you make what is clearly a complex operation look simple and easy gets me every time. Thanks for another entertaining and interesting project vid dude.
To be fair, I saw her floors and they are wood, as well as wood baseboards. I don’t think there is even stain on them. I feel she’s just balancing things out in the house by painting the doors while benefiting from the solid wood ;)
Great job! It is wonderful to see someone from the younger generation that is will to work with their hands. Thank you for being an upcoming craftsman.
You could suggest to your Mom that a translucent finish would be nice. Say a white wax. The wood will darken beneath but won’t go yellow like varnished pine does.
Well done young man! It's refreshing to see the younger generation doing such fine work. This video showed up in my feed at the perfect time as I'm planning on remaking all of the doors for the closets in our house.
I made a couple of barn doors for my wife in our home, but I like how you did these doors and I might go back and make new doors based on your template. Thank you
I am loving your videos!!! You’re so amazing! I love working with wood and building things, but it took my foolish self to become an (*cough* older) adult to really appreciate making things with wood with my own hands. What I wouldn’t give to go back to middle school and learn all I could from my woodworking class. And now I feel the same for my agriculture class!! Ugh. At least I got home-ec down pat early on in life. Hah!
Broooooooo! That’s awesome! REAL WOOD DOORS! You don’t see that often nowadays! My house growing up built in early 70’s had all wood doors! Thank you for the video! 👍. Great Job & you’ve inspired me to “DO” this! I don’t know about anyone else out there but it bothers me that I don’t have real wood doors! We can build our own and way cheaper than the cheap hollow doors they mostly use today!! Hopefully mom & dad changed their mind on painting them!!!
This is exactly what I needed. Unlike a lot of videos out there, you showed us how to build quality doors without expensive specialized tools. I am curious about something. I noticed that you didn't use a planar. Did any of your pieces give you problems with bowing? Excellent camera work and narration, without annoying music and other nonsense.
I just made one of these myself with a table saw and circular saw in a parking lot on sawhorses. No planer. Just picked 5 super straight kiln dried boards at Lowes. Took 10 minutes to pick out 5, but no issues with bowing, just some cosmetic sanding on a few of the joints by the time I was done.
Josh. Awesome work young man. Keep seeing "grown men" concerned over your table saw set up. Just. Cause they are scared doesn't mean you don't know what you're doing.
One thing I have taken seriously and seen as game changer is using simple contractor grade tools for heavy commercial work, your table saw and miter as viewed most profitable tools for a very low cost, awesome video, thank you pal. ❤
Pretty much the exact doors I'm planning to build. Thanks for the detailed guide! Gonna try to tackle them as both interior doors as well as thinner versions of them as bifold closet doors.
Where are these doors installed? I built a door using single-piece components and the wild humidity swings would cause the door to warp in Spring and become unusable. Dead flat when I made it in winter.
After spending $1000's on what I thought were the staple tools, this guy has all the tools I tossed making great doors that I am trying to make to save a few bucks.
Great Job Man! I recently found your channel and I love the idea for creating content using minimal dimensional lumber to create projects that can be easily accomplished with very basic tools. Keep up the great work!
You just showed up on my home page and I just subscribed. I've made barn doors with a similar method, I just used t&g boards (which gets a little more pricey). Great work man!
Thank you for the video. It is the best woodworking what I have seen. I am planning to make similar door like you. With basic tools what I have. Table saw, cheap plunge router and now circular saw and of course chisels and handsaws. I had some theory how I could do that, but now I seen it in reality, that it is possible. Not just with tools from best toolmakers.
The doors turned out beautiful when I started I only had a couple of tools myself excellent excellent job keep up the great work love the videos new subscriber
Well done, as soon as I seen you using your table saw to make your female grooves it took me back to my woodworking days a few years ago. I did everything with just a few power tools and the rest hand tools and always free pallets or lumber so it took some crafty methods to come up with quality craftsmanship. Boy is this fun. Your doors come up so nice man. Better than I could do. Definitely saving your vid so I can make these. I need bedroom doors for my kiddos rooms lol
Wonderful job on these doors. Now that it's been about a year since you built them I'd love to know if you have any comments on how they've moved over time? Any issues with expansion or contraction of the solid lumber? any warping as they've dried out?
Hi Josh, you are soooo talented. Thank you for posting and I truly enjoyed watching this video, you have inspired me to us what I have to build the doors I need for my new pantry. Keep up the awesome work.
You are doing good for a young guy pushing. Keep pushing ! Remember with really good woodworkers, there is no "BOX" . doesn't exist, do not let folks try to drive you into or even tell you the "BOX EXISTS". Always think outside that "box". Your imaginary rules you speak of are a very very good growing tool to keep you looking in all directions for solutions. Woodworking is a series of challenges and all we do is dirscover the solution and apply it ! I like your vertical (Not up and down, ha , nice verbage) solutions. You got it going. Keep at it !!!!
Excellent work. You have some good skills to expand from. I know it’s been said but please consider your shop safety a bit more. I’m mostly concerned with your tablesaw procedures. When cross cutting, try using a miter guide. Even if you don’t need it. Boards can easily get mis-aligned and will catch the blade and kickback. Also wouldn’t ever pass your hand over the sawblade no matter what. Use a push stick even when you don’t “need” it. I saw later in the video you were using a stick and that’s great.
I would also add that maybe one of your next projects be a table saw cabinet. There are many examples out there of rolling ones but watching it wobble while cutting made me cringe. Woodworking accidents can change your life. Maybe a shop vac on the dust port after the cabinet as well. Other than that, the doors look awesome. Good work.
Router will make light use of creating a channel in that pine. If you have a router table you can speed up that process. Much faster than using the table saw and a chisel. Thanks for sharing. +1 for giving measurements. Most charge for those.
I was so nervous watching that part. I just knew one of those tenon cutoffs was gonna bind at the front of the blade and eject towards him. Now I know how other people feel when they watch me work and I’m like “it’s fine don’t worry so much!” 😂
Safety's an Illusion, Use Caution and Awareness of your Surroundings. Safety can be taken for granted.. I've done similar projects with only a Skillsaw, Guide Jig And a Jawhorse..in the field.. outside.. Respect your Tools and learn Proficiency accidents Can and Will happen, no matter how bubble wrapped the world is..
Great job! Thanks for the training help. Had to reduce the size for a 27 x 73 for a house in Tijuana, Mexico. I used Visio to get the dimension perfect. Your right, the natural wood, and knots are better with just a shellac, or oil.
I misses the humor in the "Mom comment". Respect and honor your mother until her very last breath even if you have to build 100 doors for her to paint. My Mother is 90 years old and I would move the Earth for her if she asked me. Cherish every moment because someday all you will have are the memories.
@@luisstanker1491 Haha. "Mess Swine" good one. While i work on something, it`s true that i am a "mess swine. I do tidy up regularly though. Your statement "In a dirty Workshop, a clean work will never arise" is a cute axiom but doesn`t actually carry much weight. Looks like he did a good job on his doors. Clean work as you say. He could work far more safely but we`re talking about mess grouchy man!
Way to go, Josh. Thank you for a great and informative video. We appreciate your talent in woodworking, and yes, we agree, leave them unpainted!!! Very nice finish.
Wow, thank you so much for sharing, these doors are made better and stronger than all those high price doors at the big box stores, they sandwich 2 pieces together and throw garbage in the middle and call it a door, kinda like making peanut butter and jelly sandwich, and fall apart the same if it gets wet
Great job with what you had! Honestly well done. Like everyone commenting I did a lot of wincing when you were at the table saw. One moment I don't think anyone has mentioned is at 1:11 when you drag the piece back between the blade and the fence. Yikes! It is easy to get over confident with a table saw. Accidents happen and they are unpredictable. When I was 11 I had to help my father drive to the hospital after he cut half his thumb off on a table saw and he was a professional, worked maintenance in sawmills his whole life..
I like your doors, but have a question for you, I don't see where you left any room for seasonal wood expansion. Did I miss it? If not, can you tell me how long you've had the doors and if you have had any issues with that? I'm inquiring because I want to build a solid front door without panels and am concerned about expansion issues.
The best video on TH-cam for how to make interior doors, simple tool list and design. I'll make my door the same way except I'll use a piece of 1/4" plywood Instead of the slats, keep up the good work and stay safe!
Dude, I saw a shop vac in there somewhere, adapt that thing to collect your table saw dust to cut down on mess, fire and breathing hazards. I adapt one to connect to every tool I can. You don’t need an expensive dust collection unit with ducts everywhere to benefit. There’s even how tos out there for making a cyclonic first stage out of a trash barrel to increase capacity and help vac filters last longer.
More detailed Plans available on my website joshwrightwoodworking.com
Thanks for the reply Josh..I am enclosing a partial area of a patio to accommodate a sitting room for a severely handicapped person abd I don't have the height to get a regular door there so I'm thinking that I nay have to build one. It will be a sliding exterior for wheelchair access..
what of the door was made to short, is it possible to add a 12 inch extension? 🙁
@@tonyalangdon763 lol, we have all been there. Maybe you could edge glue a 6" piece on both the top and bottom to keep the symmetry... I think that may be the least noticeable fix but maybe you will think of something better.
@@JoshWrightWoodworking that makes sense, I'll work on that. I made this shed and doors from skids, would it be possible to share a pic with you. I measure the top board, 7'2", I still did 6'2"
Look up wobbling the blade its like a dato of sorts. Great job on them doors.
Pro-tip: as you were assembling the door, you were wiping the glue spill out off, after clamping everything together, let the bead of glue dry then just snap it off later. This will keep you from having to sand to get all the glue smear off and your whole surface will stay plumb. Just a light sanding will clean up where the glue was.
Agreed! I learned this the hard way after doing a few glue ups. It is also easier.
You can also use a lightly damp and sponge or rag to wipe it off after you Pin the door
Thanks!
Have you ever tried removibg the exess with a syringe? Like just suck it up
Yes! I learned this the hard way. Cracking off dried glue is a heck of a lot easier than sanding dried glue that I smeared across the wood
Looks like my dust collection system...on the floor, in the machines, on my shirt, basically everywhere. Great job on the doors.
Box fan with a home air filter zip tied to the intake end of it!
Got that one from a friend who would stick it by their door and brush their cat in front of it.
That cat is larger than a raccoon. And we have some big raccoons in the area
Same as mine, though I did once tape a regular home-vacuum hose to my orbital sander and then twist tie the tape around the dust chute of the sander when I was sanding paint off a door. I sort of had to do that to prevent the paint from clumping onto the sanding disc.
Door blanks like this are going for $380+ in many places. I know, because I’ve been looking for a door for the cabin I’ve been remodeling. Exceptional value in making these yourself. Good job!
And they are veneered pine. Not solid pine.
“Painted against my will” I feel for ya man. They look great!
Great job buddy, you have inspired this 56 year old to try my hand at making a set of doors for my study. Good to see a young man working hard. you are a true craftsman
Absolutely...!!!
This Country needs more young men like him.
Did you end up making them Rick? I'd love to know how they turned out.
@@cmhuffman1986 No I didn't shortly after this video our home got flooded and we have been out of it to rebuild
it is refreshing to see such a young man work with wood and show skill without a cnc machine.Very nice job.
It's nice to see a real person's workshop and seeing the kind of tools a real person would use! Thanks!
For sure!
The dust collection system told me it was a real persons shop!
probably the top five set of barn doors I've seen built on you tube so far. This kid has some skills and is going to go far.
This guy is proof you don't need a whole lot of fancy tools to get the job done.
Bro, I clicked on this video after seeing your comment (which was apparently the first one).
He has a table saw, mitre saw, band saw and enough clamps what else do you need for this.
Me: trying to figure out how to complete a project with my only tool - the circular saw! 🤪
@@soyythomas well I guess on the majority of videos I watch it seems like everybody has a warehouse full of tools. This guy has enough to get by but not an overabundance.
But a router would have made cleaning out those tongue and groove cuts a lot faster and easier.
@@steelsunpi mm yes. But I don't think he doesn't own one. He might just like it the other way.👍
His router is part of his miter saw set up
Excellent build! "Against my will" was definitely the 'finishing' touch!
Probably could have remained unsaid.. seems a bit disrespectful ro Mom
@@razorkane5011 It's more about preference than disrespect. I think it was meant to be a bit of humor.
Wow, finally, a video that shows you how to make a basic interior door with basic tools. Thank you, sir, for taking the time to show us that it can be achieved. I need to replace all of my interior doors , nd with the help of your video, it will now be possible for this 64 yr old female to finally start this project. 👏👍
You have a couple years on me but this female having only the very basic skills and tools is feeling confident now that “she can”!
So did you start and get any doors done? Love that I am not the only 50+ starting their wood journey and with doors no less. :D
@b3owu1f unfortunately I have not . We had to move my elderly mother in and are providing care for her. All wood projects have been put on hold.
A chop saw, a table saw, some glue and a brain, and this is what you did. Beautiful!!!!
What you lack in tools, you make up in skill. Great woodworking Josh, I appreciate you sharing your talent with all of us.
Nice to see someone that doesn’t rely on thousands of tools but on skill . Great job thanks for the video
I have done this before, and it works great. A couple of things you might want to add to your shop to make your life easier is a couple of folding saw horses and a 1/2 pc of plywood to make an offload table, and a rolling stand to feed. I do a lot of stuff on job sites rather than in a shop, so I have had to make do a lot, but anytime you get stuff over 2-3ft long having a little extra support makes it easier, safer, and gives you a better product. But that said I really enjoy both the way you are doing things, and the way you explain them. As a teacher I enjoy watching others that teach, and explain things in a simple understandable way. It doesn't take a genius to make complicated well complicated, but it does take one to simplify things.
Very nice job Josh. So nice to see such a young man with these skills! Never lose respect for your power tools as you continue to build your skills. Consider always using a push stick no matter what your depth of cut is! My rule of thumb (why I still have two at 73 years old) is to never allow my hand to pass over the blade on my jointer and table saw no matter what the depth of cut is set at.
Enjoyed your vid!
John
I use that same rule. My dad worked for a man when I was kid that built gazebos. One day the man was cutting a large rabbit in a 4x4 cedar post on the table saw. He was guiding the board over the blade with his hands, not really thinking much of it, I guess, because the blade was only cutting through half the thickness of the board. However, there a really bad knot in the board and when the dado blade hit it , the board pretty much exploded and his hand went right down on the blade. Lost his pinky, ring finger and a quarter of his palm. The stuff of nightmares.
That table saw was the main character in this video...it earned its keep. Great job.
They look great. Loved the quip about “painted against my will” hahaha
You never cease to amaze me Josh. I love the comment about painting "against my will"...... agreed 👍
Nice to see you leaving the panels floating - many people glue and nail/screw everything together, forgetting about seasonal wood movement (and boy do we get plenty of that in the UK!). Also good to see a small table saw being used for both joinery and re-sawing. I love learning, and taught me quite a bit, thanks!
Proud of this kid 👍 nice job I hope in the past 4 years you've kept this going .
You're not only a good woodworker, you're also a good son. Keep it up, you're doing great.
I just found your channel. Im impressed. Real world tools, real world shop, awesome builds. You've earned my subscription. Keep up the good work brother.
The way you make what is clearly a complex operation look simple and easy gets me every time. Thanks for another entertaining and interesting project vid dude.
It's not complex, it's actually really simple. He just did it in the most dangerous way possible and he also did it completely wrong.
These look fantastic and you did very good using common tools for the average DyIer
Wow really nice Josh! Great to see a younger person doing this really great job. Excellent!
Don't know why, but I really like these kind of videos.
Noooooo! Don't paint these gorgeous wood doors, Mom! Just poly them and enjoy the craftsmanship and natural beauty!
Noooooooo! Don't poly those gorgeous wood doors! Apply a nice finish like shellac or linseed oil!
To be fair, I saw her floors and they are wood, as well as wood baseboards. I don’t think there is even stain on them. I feel she’s just balancing things out in the house by painting the doors while benefiting from the solid wood ;)
That’s what I said. Painting those beautiful doors should be a crime 😅
Finally a video where the guys tools are actually what 99% of us have room for and use.
painted against my will too. That some beautiful wood.
Hell of a job sir, especially with minimal tools.
Great job! It is wonderful to see someone from the younger generation that is will to work with their hands. Thank you for being an upcoming craftsman.
That's some really smart looking doors with basic material and lots of effort. Thanks for sharing.
Great job. You make it look so simple.
Your very talented for such a young man. On your way to be a master carpenter 😊
"painted against my will" 😂😂😂😂
Awesome videos man!!!
In my house : Against my will
Translation: Married
You could suggest to your Mom that a translucent finish would be nice. Say a white wax. The wood will darken beneath but won’t go yellow like varnished pine does.
If it was me I would put a nice varnish on it any ways and be like oops I forgot you wanted them painted. The be like but mom look how nice they are.
im 72 started i became a carpenter in 1970 and i like what you do keep up the good work
Goes to show what you can do with ambition and effort . Great video
So simple, cost effective disign but good looking maked with a basic and affordable tools for everyone.
Most inspiring video!
Well done young man! It's refreshing to see the younger generation doing such fine work. This video showed up in my feed at the perfect time as I'm planning on remaking all of the doors for the closets in our house.
I made a couple of barn doors for my wife in our home, but I like how you did these doors and I might go back and make new doors based on your template. Thank you
I am loving your videos!!! You’re so amazing! I love working with wood and building things, but it took my foolish self to become an (*cough* older) adult to really appreciate making things with wood with my own hands. What I wouldn’t give to go back to middle school and learn all I could from my woodworking class. And now I feel the same for my agriculture class!! Ugh. At least I got home-ec down pat early on in life. Hah!
Broooooooo! That’s awesome!
REAL WOOD DOORS!
You don’t see that often nowadays! My house growing up built in early 70’s had all wood doors! Thank you for the video! 👍.
Great Job & you’ve inspired me to “DO” this! I don’t know about anyone else out there but it bothers me that I don’t have real wood doors! We can build our own and way cheaper than the cheap hollow doors they mostly use today!!
Hopefully mom & dad changed their mind on painting them!!!
I like the way you built the doors with minimal tools and hand tools, and made them look awesome!
I enjoy seeing people do great work with modest tools.
This is exactly what I needed. Unlike a lot of videos out there, you showed us how to build quality doors without expensive specialized tools. I am curious about something. I noticed that you didn't use a planar. Did any of your pieces give you problems with bowing? Excellent camera work and narration, without annoying music and other nonsense.
I just made one of these myself with a table saw and circular saw in a parking lot on sawhorses. No planer. Just picked 5 super straight kiln dried boards at Lowes. Took 10 minutes to pick out 5, but no issues with bowing, just some cosmetic sanding on a few of the joints by the time I was done.
Josh. Awesome work young man. Keep seeing "grown men" concerned over your table saw set up. Just. Cause they are scared doesn't mean you don't know what you're doing.
Make yourself a router plane, Josh. Great for cleaning up those grooves. You can use an allen key for the blade.
One thing I have taken seriously and seen as game changer is using simple contractor grade tools for heavy commercial work, your table saw and miter as viewed most profitable tools for a very low cost, awesome video, thank you pal. ❤
Pretty much the exact doors I'm planning to build. Thanks for the detailed guide! Gonna try to tackle them as both interior doors as well as thinner versions of them as bifold closet doors.
Wow, you should be proud of the skill in you have both in creating and teaching.
Thanks.
Where are these doors installed? I built a door using single-piece components and the wild humidity swings would cause the door to warp in Spring and become unusable. Dead flat when I made it in winter.
This is by far my favorite woodworking/DIY youtube channel, and I'm subscribed to probably 100 of them.
I didn't realize until about 11:20 how young this guy really is. I'm even more impressed now
After spending $1000's on what I thought were the staple tools, this guy has all the tools I tossed making great doors that I am trying to make to save a few bucks.
Great Job Man! I recently found your channel and I love the idea for creating content using minimal dimensional lumber to create projects that can be easily accomplished with very basic tools. Keep up the great work!
Nice to see a younger man working with there hands and doing something positive. Nice vid!
damn kid, im gonna have to start following you. I never thought about just making my own doors, hmmmm.
Great job! Love to see a young adult enjoying wood working
You just showed up on my home page and I just subscribed. I've made barn doors with a similar method, I just used t&g boards (which gets a little more pricey). Great work man!
Thank you for the video. It is the best woodworking what I have seen. I am planning to make similar door like you. With basic tools what I have. Table saw, cheap plunge router and now circular saw and of course chisels and handsaws. I had some theory how I could do that, but now I seen it in reality, that it is possible. Not just with tools from best toolmakers.
The doors turned out beautiful when I started I only had a couple of tools myself excellent excellent job keep up the great work love the videos new subscriber
Well done, as soon as I seen you using your table saw to make your female grooves it took me back to my woodworking days a few years ago. I did everything with just a few power tools and the rest hand tools and always free pallets or lumber so it took some crafty methods to come up with quality craftsmanship. Boy is this fun. Your doors come up so nice man. Better than I could do. Definitely saving your vid so I can make these. I need bedroom doors for my kiddos rooms lol
Wonderful job on these doors. Now that it's been about a year since you built them I'd love to know if you have any comments on how they've moved over time? Any issues with expansion or contraction of the solid lumber? any warping as they've dried out?
Good question, I would be curious also
I came to the comments to ask this myself, would love to know
Probably should make sure your using good quality lumber that is dry. A store bought door can warp a
Iittle too
I am also curious I imagine it being hung would keep it constrained enough but who knows with how bad construction lumber is
I love that there is sawdust everywhere and you spread your glue with a finger. That's how most if us do it I imagine :) Subscribed
Hi Josh, you are soooo talented. Thank you for posting and I truly enjoyed watching this video, you have inspired me to us what I have to build the doors I need for my new pantry. Keep up the awesome work.
You are doing good for a young guy pushing. Keep pushing ! Remember with really good woodworkers, there is no "BOX" . doesn't exist, do not let folks try to drive you into or even tell you the "BOX EXISTS". Always think outside that "box". Your imaginary rules you speak of are a very very good growing tool to keep you looking in all directions for solutions. Woodworking is a series of challenges and all we do is dirscover the solution and apply it ! I like your vertical (Not up and down, ha , nice verbage) solutions. You got it going. Keep at it !!!!
Excellent work. You have some good skills to expand from. I know it’s been said but please consider your shop safety a bit more. I’m mostly concerned with your tablesaw procedures. When cross cutting, try using a miter guide. Even if you don’t need it. Boards can easily get mis-aligned and will catch the blade and kickback. Also wouldn’t ever pass your hand over the sawblade no matter what. Use a push stick even when you don’t “need” it. I saw later in the video you were using a stick and that’s great.
He’ll learn 😉
I would also add that maybe one of your next projects be a table saw cabinet. There are many examples out there of rolling ones but watching it wobble while cutting made me cringe. Woodworking accidents can change your life. Maybe a shop vac on the dust port after the cabinet as well. Other than that, the doors look awesome. Good work.
Anyone know if this kid still has his fingers?
He’s young they’ll grow back🎉🎉🎉😊
Don't be such a pussy
Hilarious 😆
He's confident. Id still at least wear gloves.
Gloves are more likely to snag and get you in trouble. This kid seems fine.
Router will make light use of creating a channel in that pine. If you have a router table you can speed up that process. Much faster than using the table saw and a chisel. Thanks for sharing. +1 for giving measurements. Most charge for those.
Cares about his lungs but gives no fu cks about his fingers.
One can live without fingers. But not without lungs. ;)
Great job, however I you need to work safer, that table saw needs a proper stand and out feed table, stay safe
I was so nervous watching that part. I just knew one of those tenon cutoffs was gonna bind at the front of the blade and eject towards him. Now I know how other people feel when they watch me work and I’m like “it’s fine don’t worry so much!” 😂
Yes! please be safe. A kickback while your pulling that board and you could lose your right index finger.
And use a miter gauge for the cross cutting of the tenon shoulders, and a spacer block, not the fence, to get the length.
Safety's an Illusion, Use Caution and Awareness of your Surroundings. Safety can be taken for granted.. I've done similar projects with only a Skillsaw, Guide Jig And a Jawhorse..in the field.. outside.. Respect your Tools and learn Proficiency accidents Can and Will happen, no matter how bubble wrapped the world is..
@@mjolnirswrath23 promise I won't say I told you so
Great job! Thanks for the training help. Had to reduce the size for a 27 x 73 for a house in Tijuana, Mexico. I used Visio to get the dimension perfect. Your right, the natural wood, and knots are better with just a shellac, or oil.
I misses the humor in the "Mom comment". Respect and honor your mother until her very last breath even if you have to build 100 doors for her to paint. My Mother is 90 years old and I would move the Earth for her if she asked me. Cherish every moment because someday all you will have are the memories.
Very nice project. I'm wondering, with using construction grade lumber, if you had issues with warping?
Beautiful doors, hopefully we can see the finished project.
I know you are young, but that is probably the most unsafe operation of a table saw I’ve ever seen! Be safe , save those digits for future use.
Absolut true,,,🙈🤦♂️
And d whole Workshop is a big mess.
Shame on you for such a joung man.
@@luisstanker1491 shops get messy when working on a project. Lighten up lol!
@@glennryzebol4472
In a dirty Workshop, a clean work will never arise.
U a little messi swine too, i am sure.
@@luisstanker1491 Haha. "Mess Swine" good one. While i work on something, it`s true that i am a "mess swine. I do tidy up regularly though. Your statement "In a dirty Workshop, a clean work will never arise" is a cute axiom but doesn`t actually carry much weight. Looks like he did a good job on his doors. Clean work as you say. He could work far more safely but we`re talking about mess grouchy man!
@@glennryzebol4472 shop was messy before he started
Way to go, Josh. Thank you for a great and informative video. We appreciate your talent in woodworking, and yes, we agree, leave them unpainted!!! Very nice finish.
Please, for the sake of your future girlfriends, use some push sticks or something dude. you gonna lose those fingers
My heart dropped EVERY TIME he was at the table saw. Sweating bullets over here!
@@cherokeehawkproperties ikr
From some one who's lost fingers on one of them.... Use a push stick at least man!! Hurts like hell. Watching that was jaw clenching. But nice job!
Well, at least he uses a mask & eye protection. But, I too worried about those fingers as I watched.
Push stick but also push block for those close ups that can tend to bind with smaller pieces.
Wow, thank you so much for sharing, these doors are made better and stronger than all those high price doors at the big box stores, they sandwich 2 pieces together and throw garbage in the middle and call it a door, kinda like making peanut butter and jelly sandwich, and fall apart the same if it gets wet
Great job with what you had! Honestly well done. Like everyone commenting I did a lot of wincing when you were at the table saw. One moment I don't think anyone has mentioned is at 1:11 when you drag the piece back between the blade and the fence. Yikes! It is easy to get over confident with a table saw. Accidents happen and they are unpredictable. When I was 11 I had to help my father drive to the hospital after he cut half his thumb off on a table saw and he was a professional, worked maintenance in sawmills his whole life..
Stack multiple blades together with or without washers for spacers for a diy dado stack. Works perfect
Very nice job. Great to see what you are doing with the tools you have!
I’m with you man, I like the natural look.
Hi Josh, I had to watch this vid again....the doors are beautiful!
Very impressed with your skills Josh; no fancy tools!!! WOW! Congratulations!!!
Very impressive especially working on such large pieces with such a compact tablesaw!
I like your doors, but have a question for you, I don't see where you left any room for seasonal wood expansion. Did I miss it? If not, can you tell me how long you've had the doors and if you have had any issues with that? I'm inquiring because I want to build a solid front door without panels and am concerned about expansion issues.
These are beautiful!! Great work!!
great to watch what my tools and workshop looked like when I got started 15 years ago. Keep up the great work.
Checked out a few videos on how to make doors and this one is by far the best (for my tools at least). Thanks!
I got on youtube and looked up how to make doors. Your video popped up and, bam, I'm now making these doors too. Thanks for the video.
Nice job I like the way you did the top arch thanks for sharing with the rest of us wood workers
The best video on TH-cam for how to make interior doors, simple tool list and design. I'll make my door the same way except I'll use a piece of 1/4" plywood Instead of the slats, keep up the good work and stay safe!
Dude, I saw a shop vac in there somewhere, adapt that thing to collect your table saw dust to cut down on mess, fire and breathing hazards. I adapt one to connect to every tool I can.
You don’t need an expensive dust collection unit with ducts everywhere to benefit. There’s even how tos out there for making a cyclonic first stage out of a trash barrel to increase capacity and help vac filters last longer.
Excellent job my Friend.
I can Imagine what you can do with Professional Tools.
You A Pro my Brother!. 👏👏👏
Thank you. I learned a few things about my new inherited table saw.
Exquisite use of 2X6es. Keep up the good work.
Well done! And no expensive tools, even better!!!