What a good video. I bought a 85 few weeks ago. Now I am also learning on how to work on my engine incase I ever run into the same situation. Thank u for the step by step.🤘🏻
The best advice I can give to anyone doing this head replacement, would be to go ahead and do a piston ring job, rod bearing etc., at the same time. I did the head job, and not long after the ring job needed doing. I had to pull the head again. Save yourself some time and labor. Do it all at the same time.
It’s good to see another video from you guys. It’s been way to long. Can’t wait to see the rest of him getting put back together. No trail Videos this year I take it with the situation we are in these days.
I use to fart around with a bungee cord too ., but I found ., taking off the gear and letting the chain go down , is just fine. Keeping the marks on crankshaft and cam at 12 o’clock ., during the entire procedure
This was a great video, nice and slow for someone like me who’s never done this before. Have blown the head gasket on my 1992 Toyota pickup. I’ve been driving it for 30 years, first trouble I’ve ever had with it. Did you get it back together? Wish there was a part 2. Thanks!
Top tip folks. Never use resurfaced or reused rockers on these engines. They have to be new when using a new cam. I got away with used rockers on a new cam only once out of luck. My dads fancy rebuild had resurfaced pads and a very nice LCE cam. It wiped the lobes in just a few days. The $250 Amazon complete heads with cams, dont bother. It sucks finding good heads for these engines now.
🤔THAT Toyota 22 R ENGINE REALLY WAS THE BEST 4 cycle 4 cylinder ENGINE WAS EVER MADE . I REALLY DO KNOW I AM A REAL ASE certified master Auto technician .or a REAL certified ASE Master Auto Mechanic WITH OVER 60 year's of REAL experience .🏁🏁
Part 2 would've been so helpful !
What a good video. I bought a 85 few weeks ago. Now I am also learning on how to work on my engine incase I ever run into the same situation. Thank u for the step by step.🤘🏻
Please show us part 2. Awesome part 1 BTW!
Funny how you can find a video 3 years old and still learn something from it. Awesome video.
Great video! Very informative for someone also about to crack a motor in apart for the first time. Can’t wait for part two! Cheers!
The best advice I can give to anyone doing this head replacement, would be to go ahead and do a piston ring job, rod bearing etc., at the same time. I did the head job, and not long after the ring job needed doing. I had to pull the head again. Save yourself some time and labor. Do it all at the same time.
RIP part 2 😢part 1 was nice to watch, wish I could watch you two
and he never put it back together
It’s good to see another video from you guys. It’s been way to long. Can’t wait to see the rest of him getting put back together. No trail Videos this year I take it with the situation we are in these days.
Don’t worry, we have more trail videos coming out this winter!
I'd love to see a video of the camper conversion!
We have a walk around and some vlogs on the channel!
I use to fart around with a bungee cord too ., but I found ., taking off the gear and letting the chain go down , is just fine. Keeping the marks on crankshaft and cam at 12 o’clock ., during the entire procedure
I was wondering cause I just let mine drop
This was a great video, nice and slow for someone like me who’s never done this before. Have blown the head gasket on my 1992 Toyota pickup. I’ve been driving it for 30 years, first trouble I’ve ever had with it. Did you get it back together? Wish there was a part 2. Thanks!
Where’s part 2? Great part 1..
Crud. I'm where you left off with this vid. Was looking around for inspiration in putting everything back together. Hope you got yours back together.
No part 2?
Come on where is part 2?
I need part 2 to finish my head replacement 🙏
Do you have the dimensions as to making the wedge block to hold the chain? Thanks.
Love the Toyota Camper when you first introduced it here on YT!
Top tip folks. Never use resurfaced or reused rockers on these engines. They have to be new when using a new cam. I got away with used rockers on a new cam only once out of luck. My dads fancy rebuild had resurfaced pads and a very nice LCE cam. It wiped the lobes in just a few days. The $250 Amazon complete heads with cams, dont bother. It sucks finding good heads for these engines now.
improper valve lash is the cause for that unusual camshaft wear.
When's part 2 coming?
so will there never be a part 2?
any mistakes ?
That’s a rod knock
Head gasket on 22r just went out. Perfect video
I’m running into this exact issue. Could you not just replace the cam alone?
Where is part 2!!!!!!
What camper is that
Still working on part. 2?
part 2?
How much was the tent?
What happened to part 2?
🤔THAT Toyota 22 R ENGINE REALLY WAS THE BEST 4 cycle 4 cylinder ENGINE WAS EVER MADE . I REALLY DO KNOW I AM A REAL ASE certified master Auto technician .or a REAL certified ASE Master Auto Mechanic WITH OVER 60 year's of REAL experience .🏁🏁
Anyone ever notice every 22r head gasket video on TH-cam theyre running green coolant?
Red don't leak?
you better replace the rocker assembly.
fiddle sticks
Does yours have a lift kit?
Part 2?