That stand is to keep the trigger off the ground during starting. Same as with Stihl weed trimmers, and my trimmer rolls around in the back of the truck, like you said. Great review! I like your style.
OMG! That stand you don't like, is extremely useful! It doubles as a handle when cutting at the extents of it's reach. One hand there and one on the throttle grip, lift it over your head and you can add your height to the 12 ft length. You may want to change that in your video?
yup. exactly. i totally agree. i use that handle every day. without it you can subtract about 2 - 3 feet off your reach, plus it stablizes the unit qhen adding oil and gas. STIHL PLEASE DO NOT LISTEN TO HIM ABOUT "USELESS HANDLE", Its VERY useful.
I borrowed my neighbors today who has this model. One thing is that you need to take breaks. I felt like I did a workout. But it went through anything I needed to cut.
Ok so maybe it's not completely useless buy its definitely not built strong enough with cheap plastic and not wide enough , it should double to stable the saw while it's sitting that way , but I agree with him , it's a bad design that needs help
84 acres of woods in KY cutting trails & clearing a 250 yd rifle range. You're more than welcome to turn money into noise by getting a head start on it all for me. LOL If I make a vid as a testimonial, I'll share it with you. But there are so many out there I think it's pointless.
Don't tempt me, lol. I'd love to just go to town in a forest, dropping trees with minimal cleanup? Sign me up! Don't worry about any testimonial or anything like that, though I do appreciate the thought, I'm not really trying to be a big youtuber or anything, I just enjoy doing all this as a hobby, plus it gets me the opportunity to play with a bunch of saws, =) Love Kentucky, gorgeous state. Used to drive through fairly often when I was stationed in Virginia, always wanted to see the sites but didn't really have time.
i just got one and without the extended extention is about 12” long but when u get the extension out is abut 18” long it work so much work is way much easier
A.C I picked up the ht131 today, got it at ACE for $600 out the door. It’s a little on the heavy side, but the extension makes it worth the extra weight. Going to be raising the umbrella on about 30 pines down the side of a long driveway. A.C do you have any complaints about the ht131?
I have a 101, and the stand is only good when working on it for most part. Don't cut it off,,, what's the benefits? Really helpful when adjusting or just maintaining engine.
hi I think your videos are great .One question from the back of the engine to the end of the bar what's the overall length when it not exstanded thanks for your help
I’m looking at the new 131. The 133 has been discontinued. But apparently the new 131 an 103 have some issues. 131 has a plastic sprocket in the shaft that breaks an gets replaced by the same part an continues to fail. The 103 I forget the specifics but was several complaints in the reviews on STIHL website
Which husky did you have? I'm on the fence between the Stihl ht131 and the Husqvarna 525pt5s. Husky is a couple pounds lighter and longer reach. Got nothing against the Stihl. Just want to make the right purchase. Thanks
as for the foot hold being, "useless"? I have to disagree. many times I have used it as a hand hold to get max height, its good for that. Its also good for keeping the saw stable while adding gas and bar oil.
Can that blade rotate or swivel horizontally 90 degrees so you can do some topping like a long pole hedge trimmer. I do not like climbing ladders and looking for something with a swivel head.
They will slowly chew through anything the bar will allow. A bit pricey though and expensive to work on buying shaft components. I need several shaft bearings and they aren't cheap. But when its running good, can't beat it.
I own a Stihl pole saw 27cc and a poulan pro pole saw which is 28cc. The Stihl is more quality of build but the poulan with only a 8" bar (2" less than the stihl) feels like it has alot more high end torque. For only $199 for the poulan pro which has Husqvarna signs on the engine case and the exhaust. So it's a husky just has cheaper externals and switches. Can't beat the deal just wanted everyone to know for a gas pole saw that is reliable fires up on the second pull Everytime. Plus it is light weight and breaks down you can load it in the trunk of a sedan
Drive train issue somewhere. Easiest thing to do first is take the cutter attachment head off and see what condition they're in, or if the cutter head got pulled on hard, could have become disconnected altogether. If that's all good, I'd check the clutch.
I have it torn down, you should be able to turn the whole drivetrain mechanism from the sprocket on the head with a flat head screw driver or just by turning the chain. It wouldn't turn, so I took that off and found it's either in the shaft or the engine area. Is it a common issue or just something odd seized up in there?
Haven't worked on a whole bunch of them, I'd check the clutch next, pretty easy to take off the power head and check it. If that's not it, you're on your own, lol. Only took one shaft apart before, promptly took it to the dealer to fix.
Every inch counts and that silly stand you do not like you are more than welcome to cut it off. Once you treat it as a handle and not a stand you might be pleasantly surprised at the extra length if affords. Arms fully extended barely reaching the trigger with my left hand I can then hold the weight and maneuver the tool gripping the handle / stand. In really sketchy long since dead cottonwoods where no boom truck can access you will appreciate every tapering inch you don't have to climb or rig.
I fucking love how you review stuff sir. This is the good this is the dumb and this is the awful. Got a sub from me and I am going to go buy one of these dudes this week. Thanks man!
OK, It's a good tool. The verbal presentation was awkward and clumsy. Don't tell the minor things you hate. Practice your presentation first. We were not told the short & long lengths of the tool, and the example of how high a 6' operator could reach. The other makers of this sort of saw have been telling these things since the tool came out in the 1990s. And it looked like you WET YOUR CHAPS!!!!
Michael Dougfir Where is your video review of the saw? Oh yea, looks like you don't have one. Also, what did you pay to view his video? Zero. Take the information he gives you, the way he gives it and shut up.
Hello I used one of those saws almost 20 years ago when I worked on a road crew for a township. It was an AWESOME tool
I have one of these and let me tell you,it one of the best tools a tree man can have.
That stand is to keep the trigger off the ground during starting. Same as with Stihl weed trimmers, and my trimmer rolls around in the back of the truck, like you said. Great review! I like your style.
I feel like it also helps keep it level while you put fuel in it.
OMG! That stand you don't like, is extremely useful! It doubles as a handle when cutting at the extents of it's reach. One hand there and one on the throttle grip, lift it over your head and you can add your height to the 12 ft length. You may want to change that in your video?
yup. exactly. i totally agree. i use that handle every day. without it you can subtract about 2 - 3 feet off your reach, plus it stablizes the unit qhen adding oil and gas. STIHL PLEASE DO NOT LISTEN TO HIM ABOUT "USELESS HANDLE", Its VERY useful.
I borrowed my neighbors today who has this model.
One thing is that you need to take breaks. I felt like I did a workout.
But it went through anything I needed to cut.
Ok so maybe it's not completely useless buy its definitely not built strong enough with cheap plastic and not wide enough , it should double to stable the saw while it's sitting that way , but I agree with him , it's a bad design that needs help
@@rpgiuliani get those boulder shoulders boi!
There's been a couple times I set the trigger at half throttle and use both hands on the power head to get maximum reach lol
I really like your style of reviewing man. Straight up. Keep safe.
Once again your videos have given me the info I need to make a decision. Purchased the HT 131 & MS 391. Thanx again Human.
np =) glad they helped a bit. Along with your FS 240, you should be all set, some nice equipment you've got, enjoy!
84 acres of woods in KY cutting trails & clearing a 250 yd rifle range. You're more than welcome to turn money into noise by getting a head start on it all for me. LOL
If I make a vid as a testimonial, I'll share it with you. But there are so many out there I think it's pointless.
Don't tempt me, lol. I'd love to just go to town in a forest, dropping trees with minimal cleanup? Sign me up! Don't worry about any testimonial or anything like that, though I do appreciate the thought, I'm not really trying to be a big youtuber or anything, I just enjoy doing all this as a hobby, plus it gets me the opportunity to play with a bunch of saws, =)
Love Kentucky, gorgeous state. Used to drive through fairly often when I was stationed in Virginia, always wanted to see the sites but didn't really have time.
i just got one and without the extended extention is about 12” long but when u get the extension out is abut 18” long it work so much work is way much easier
A.C I picked up the ht131 today, got it at ACE for $600 out the door. It’s a little on the heavy side, but the extension makes it worth the extra weight. Going to be raising the umbrella on about 30 pines down the side of a long driveway.
A.C do you have any complaints about the ht131?
I have a 101, and the stand is only good when working on it for most part. Don't cut it off,,, what's the benefits? Really helpful when adjusting or just maintaining engine.
hi I think your videos are great .One question from the back of the engine to the end of the bar what's the overall length when it not exstanded
thanks for your help
Stihl discontinued this model but they brought it back recently. Apparently a lot of people were complaining about the new model.
Is it the HT 132? I was looking for videos on it but I can't find any. Only the 131 and 133
I’m looking at the new 131. The 133 has been discontinued. But apparently the new 131 an 103 have some issues. 131 has a plastic sprocket in the shaft that breaks an gets replaced by the same part an continues to fail. The 103 I forget the specifics but was several complaints in the reviews on STIHL website
"Quite a bit of useable shaft there" that's what she said
just bought this saw today. Much better quality than my husky pole saw
Which husky did you have? I'm on the fence between the Stihl ht131 and the Husqvarna 525pt5s. Husky is a couple pounds lighter and longer reach. Got nothing against the Stihl. Just want to make the right purchase. Thanks
as for the foot hold being, "useless"? I have to disagree. many times I have used it as a hand hold to get max height, its good for that. Its also good for keeping the saw stable while adding gas and bar oil.
Can you put on attachments? if so which ones and about how much
Honest opinion; the HT 131 or Husqvarna 525pt5s? Looking to purchase one or the other this year. Glad to hear any input.
Haven't used the husky, so I can't say one way or the other, love my 131 though.
BRO!!!!! I notice that Arts sticker!!! Lol smalll world brother
I Love Stihl. Best.
I'am Your Newest Subscriber Great Videos
My chain has to be on backwards got a new one yesterday won't cut for nothing
Can that blade rotate or swivel horizontally 90 degrees so you can do some topping like a long pole hedge trimmer. I do not like climbing ladders and looking for something with a swivel head.
Yep, just loosen the two torx heads that clamp the cutting attachment in place and you can rotate it however you want.
They will slowly chew through anything the bar will allow. A bit pricey though and expensive to work on buying shaft components. I need several shaft bearings and they aren't cheap. But when its running good, can't beat it.
What's with the pictures of the Cadillac 4 door LOL
sziasztok hol lehet állítani az olajzást a a sthil km 131 r én köszönöm a segítséget!
wow its nov 2020 where have i been, thanks for a great review !
Same
I own a Stihl pole saw 27cc and a poulan pro pole saw which is 28cc. The Stihl is more quality of build but the poulan with only a 8" bar (2" less than the stihl) feels like it has alot more high end torque. For only $199 for the poulan pro which has Husqvarna signs on the engine case and the exhaust. So it's a husky just has cheaper externals and switches. Can't beat the deal just wanted everyone to know for a gas pole saw that is reliable fires up on the second pull Everytime. Plus it is light weight and breaks down you can load it in the trunk of a sedan
U should show how to change out the chain if needed.
Do you have any idea why my HT 131 will run but not crank the sprocket? I'd just like some input before I attack it
Drive train issue somewhere. Easiest thing to do first is take the cutter attachment head off and see what condition they're in, or if the cutter head got pulled on hard, could have become disconnected altogether. If that's all good, I'd check the clutch.
I have it torn down, you should be able to turn the whole drivetrain mechanism from the sprocket on the head with a flat head screw driver or just by turning the chain. It wouldn't turn, so I took that off and found it's either in the shaft or the engine area. Is it a common issue or just something odd seized up in there?
Haven't worked on a whole bunch of them, I'd check the clutch next, pretty easy to take off the power head and check it. If that's not it, you're on your own, lol. Only took one shaft apart before, promptly took it to the dealer to fix.
Put the GoPro on active mode
bet stihl wished they had kept these and the 101....that pico mini now.....nah
Every inch counts and that silly stand you do not like you are more than welcome to cut it off. Once you treat it as a handle and not a stand you might be pleasantly surprised at the extra length if affords. Arms fully extended barely reaching the trigger with my left hand I can then hold the weight and maneuver the tool gripping the handle / stand. In really sketchy long since dead cottonwoods where no boom truck can access you will appreciate every tapering inch you don't have to climb or rig.
bodybuilding tool, i like it!
"Dale" looks like a very versatile tool!
I fucking love how you review stuff sir.
This is the good this is the dumb and this is the awful. Got a sub from me and I am going to go buy one of these dudes this week. Thanks man!
It’s transgender lmfao yes!
I want one of these so bad
They absolutely come in handy, we use them daily at work.
I've got the HT101, it's got 0.5 less HP (but it doesn't have the gay footpad so +1 for the 101 there). It's an awesome tool!
Yeah, frickin hate that damn foot.
I just bought this and it is heavy. I don't like the strap it comes with , a handle would be better.
Little guys with rough raspy voices crack me up
All my saw's are transgender that's some funny shit !!!!!
nice ht 131 human
he is forgetting something the stink Sweetwater have that same stand
Eu vou comprar minha ht 131 da shtil
Fuck!! I have the FS 130R its practically the same just it has a streamer attachment lol
I have a pole saw I dont want to mention the brand but what a piece of shit! I need a real one like this
he is forgetting something the stihl weedeaters have that same stand
Yeah, but I don't do grass, so I don't know if they hate it as much as I do. Good question, I need to ask one of the guys I know that work lawncare.
@@Human1337 a tree guy trying to do grass is about as cool as a landscape guy trying to do tree work. Stick with what we do best
Worthless stand is not worthless any one that has really have used one of these every day it keeps it from lighting fires dummy duh
Man show me what the saw was made for prun some up high stuff, down on the ground don't show me anything.
Me want.
8
Please
Never ever call a machine she or a woman's name, if you do you will always have trouble with it !
I bet you got a pole on you
Transgender lol love it hahahaha
I'll take the echo ppt 280 over that unit anyday.
proceeds to cut branch on ground , and un extended ... lol Fail
OK, It's a good tool. The verbal presentation was awkward and clumsy. Don't tell the minor things you hate. Practice your presentation first. We were not told the short & long lengths of the tool, and the example of how high a 6' operator could reach. The other makers of this sort of saw have been telling these things since the tool came out in the 1990s. And it looked like you WET YOUR CHAPS!!!!
Michael Dougfir Where is your video review of the saw? Oh yea, looks like you don't have one. Also, what did you pay to view his video? Zero. Take the information he gives you, the way he gives it and shut up.
Michael Dougfir u want him to come to ur house to measure u with it don't buy one u will hurt ur self