ฝัง
- เผยแพร่เมื่อ 14 มี.ค. 2022
- 🖋 Download Vectornator here: app.adjust.com/cwy6mcc There are a lot of ways to do a million things. AKA let's learn the basics! OPEN FOR MORE INFO
0:07 - Corner Radius
0:27 - Selection Tool Modes
0:39 - Duplicate & Rotate
1:15 - Quick Actions Boolean
1:30 - Scale & Duplicate
1:48 - Quick Action Stack Order
2:37 - Group
2:49 - Duplicate & Transform Again
3:19 - Quick Actions Arrange
Hi everyone!
Welcome to Vectornator Academy for iPad. This video series will be jam-packed with Vectornator Tutorials, from beginners to advanced, that will help you learn our tool step by step. You'll find that Vectornator is clean, intuitive, and most importantly, easy to learn.
Paths are the most powerful element in vector design. They can be used to create lines, curves, arcs, and sooooo much more.
You can create infinitely complex shapes by merging multiple straight or curved lines. But you don't have to draw each individual node or path. You can make use of our transformation path options and functionalities which allow you to combine various actions into one big operation with impact!
Learn how to Duplicate and Scale at the same time. Duplicate and Rotate. Some Quick Actions tips. Change Corner Radius. And the tip of the iceberg? Simply duplicate your last actions by tapping one button as many times as you need.
Hope you enjoy! Let us know what you think in the comments section below and subscribe for more Vectornator Tutorials, inspiration, and more.
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
🎵 Music credits: Jazz the Halls by Chad Lawson
Musicbed SyncID: MB011MTFMGFJRV0
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
Vectornator is the most intuitive and precise illustration software in the galaxy. It empowers you to design anything you can imagine up to 30% faster. Create sophisticated illustrations, spectacular layout mockups, and expressive lettering on the go, whenever you want.
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
FIND US ON:
► App Store: app.adjust.com/cwy6mcc
► Website: www.vectornator.io
► Instagram: / vectornatorpro
► Facebook: / vectornator
► Twitter / vectornator
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
#vectornator #vectorantortutorial #vectornatoronipad #vectornatoripad #vectornatortips #editpaths
0:23 the radius is changing for all the corners of the square even after selecting only one node!!! How to do the same on latest version?😢
I found a hack solution. Use the node tool to move one of the points of the rectangle. Then you can undo or move the point back into the original place. Now the corner radius tool will work as expected. Seems to be a problem with unedited rectangle shapes.
@@GuywithThoughtsI tried this and still not working like the video tutorial
This was awesome to try! Great tut!
Thanks so much for this amazingly helpful video!
Our pleasure! So glad it helped
When I duplicate and rotate a shape, it shows the coordinates instead of degree angle . I was not able to place the duplicate in the right position , say 30 degree for example.
excellent video - hint: if you're a bit old and slow like me, set the CC on and playback speed to 75%. Perfect!
Thanks for your feedback 🙏
Can you apply this customized pattern into a stroke ?
Is there a way to evenly distribute N copies of a shape around a central point? This method only works if you are using a 45 degree angle of rotation including a maximum of 8 copies. I want to make 9, 10, etc. copies rotated around the same centroid.
I have been spending whole day trying to make the artwork flip, the buttons seem to be missing afterit was crashed. It should stay in that place but really struggle to find a simple button, why is the UI so tiny and difficult to use?
Wow , nice instructions....
why can't i see the degrees of rotation . Mine shows the cursor position. Looked around everywhere but can't find where to change that setting. Pls help.
I don’t happen to find corner radius under Blur?
Please help when I open a new document the backround is a transparent. But when I go to preferences to change it I’m unable to change it to “white background” please help me
How can I join two anchor points in vectonator as in illustrator there's an option called 'join' for that purpose. Thanks!
I can't get the duplicate and scale to work together. I have both selected, but it only scales it
So every time I select the node and click multiple nodes, then go to change the corner radius, all 4 corners still move. I’ve only selected opposing corners but all move. What am I doing wrong? Please help! Ahhhhhh 😢
Same thing happened to me. And my corner radius is set to pt, not %. Did you figure out how to change only selected nodes?
Same here and no percent choice, only point choice.
@@skysettermobiles same thing happened to me ...did you find the solution?
@@sajadsoorniuse Polygon tool, not rectangle tool
Thanks@@dh4444
If you are breaking your brain with scale and dupe, this feature only works with M2 chip. If you have a cheap iPad do it manually like offset path or something. I’ll post more helpful tutorials
I am lost at 1:25, how did you select the flower in the middle please?
You just tap in the middle to select it. Let us know if this helps 🙏
PLEASE SOMEBODY HELP MEEEE!!!! i tried to round the two corners but i did not work with me like the video ... i did the exact same steps but still not working!
...is that now I have a whole new flower shape in the middle > it was difficult to do/find it. 1.26 But after a time it was ok. Thank jou!
I am having the same issue. At 1:25, I can’t see how she selected the flower in the middle. Can you please tell me how you solved this?
Hey Vectornator team! I'm a design-engineer for fashion and I have a question: How can I design Vector brushes which look like seams (a line with gaps)? Thank you so much!
Check out our Instagram Reels where we previously posted a 'How to Create a Dotted Line' demo. By adjusting a path's Dash and Gap settings, you can create dotted or dashed lines in seconds :)
💛💙
How do I scale and print in vectornator, been searching and can’t find anything? I have a line drawing, simple, that I want to scale down to the size of a nickel.
If you don’t have an iPad Pro it won’t work. It only works for m2
Can someone tell me why there‘s no path tab and arrange tab on mine? Do I need to turn it on somewhere in settings?
We have recently adjusted our UI and combined some tabs in order to maximise your drawing space! You can now find these tabs beneath the 'Style' tab 🙂
Help, I’m trying to use Vectornator to make SVG files for my CNC machine, but when I made my cuts I noticed the lines are all doubled up, because it causes the CNC to make two passes on each cut instead of one which can really eat up time. In Vectornator you have to really blow up the image and zoom in all the way to see the doubled lines. i tried minimizing the size of the stroke to 0.01 but it doesn’t work, the lines are still doubled. how do I make the stroke an individual line instead of 2?
Can you please forward your .vectornator file to our Help Team over at support@vectornator.io where they would be happy to help!
My corner radius is in "pt" how can i change it to percentage? Please help me
Hey there, since the creation of this video Vectornator has been updated to only offer Corner Radius adjustment via 'pt'. If you'd like to see more units available for this feature, we encourage you to log a request on our Ideas & Feedback forum! forum.vectornator.io/c/ideas-feedback/8
Please make this software also for windows platform 🙏🙏🙏🙏😭😭
Cool
Thanks! 🙌
@@linearityhq more videos on how to create basic shapes. That leaf tip was amazing. Being a noob, it was impossible to create a perfect symmetrical one.
I wish all videos done on an iPad were also done on a Mac.
We have a mac series ongoing. But we're going to produce more and more, don't worry!
th-cam.com/play/PLzMYejW-rQwfYaUXfkqWsQhY9yZHhNolk.html
I have never seen such pathetic useless tool as vectornator. I am doing exactly same thing as in this video. And still i cannot generate the leaf. Such useless app. Before this i spend one hour trying to just copy things. It just wouldn't happen and then suddenly it happens.
The moving layer up and down shortcut is such a life saver. It better than affinity deisgner 2
It’s a little different based on devices and iOS software 😂. I just mess with it until I get it. The duplicate on iPhone is a completely different process but I figured it out