Go Kart Harbor Freight Predator 212 Won't Start?

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 ก.ย. 2024

ความคิดเห็น • 65

  • @gjbingham
    @gjbingham 9 วันที่ผ่านมา

    Great video, Simplified the fix down to easy manageable steps. THanks for your help

  • @burrissc
    @burrissc 3 ปีที่แล้ว +9

    Thank you, thank you!!! After having not used my Predator chipper/shredder for a few months, it would not start after hundreds of pulls. I drained the gas from the carburetor as you showed and it started up after just a few pulls!! You saved my butt.

    • @-DIYPRO-
      @-DIYPRO-  3 ปีที่แล้ว +1

      Good to hear!

  • @dannycompton2715
    @dannycompton2715 2 ปีที่แล้ว +2

    Thank you so much my man after cussing at this thing and watching 20 videos yours was the answer corrosion in that little thing

    • @-DIYPRO-
      @-DIYPRO-  2 ปีที่แล้ว +1

      Awesome, glad it helped.

  • @davidjoeseph2646
    @davidjoeseph2646 ปีที่แล้ว +8

    Mine wont start right out of the box. 😢

    • @malachijodway3350
      @malachijodway3350 3 หลายเดือนก่อน

      Same

    • @gregjones2733
      @gregjones2733 หลายเดือนก่อน

      Mine only start with the choke on run and shuts off immediately if I switch to start while it's running​@@malachijodway3350

    • @ChristianBieser
      @ChristianBieser 15 วันที่ผ่านมา

      Me too 😭

  • @seemeknowmore
    @seemeknowmore 4 ปีที่แล้ว +5

    Great video, thanks for taking the time to make it

  • @tonyblacktopful
    @tonyblacktopful 4 ปีที่แล้ว +2

    This is a good video ..sone guys like to here ther self talk but you were very straight to the point on wat u needed to do to make the motor run agin

  • @jahnevachambers9040
    @jahnevachambers9040 3 ปีที่แล้ว +2

    Thanks your the best. My kids go kart starts and then dies. Gonna try this see how it goes. Wish I had a man that could do this for me so I wont get my hands dirty. Could use a man for other things :/

    • @-DIYPRO-
      @-DIYPRO-  3 ปีที่แล้ว +1

      Hope it did the trick!

  • @masonbowen149
    @masonbowen149 5 ปีที่แล้ว +6

    What if the engine doesn’t want to run at all even with starter fluid. What’s the problem there

    • @tamidon40
      @tamidon40 5 ปีที่แล้ว +2

      Have you checked for spark?

    • @-DIYPRO-
      @-DIYPRO-  4 ปีที่แล้ว

      Double check it's on. Check that it has oil (these have oil sensors that cut power if the oil is low). Check if you are getting spark from the plug.

    • @hxnsell5825
      @hxnsell5825 4 ปีที่แล้ว +1

      Mech Master Hi I have the same problem, how do you see if you’re getting spark?

    • @-DIYPRO-
      @-DIYPRO-  4 ปีที่แล้ว +1

      @@hxnsell5825 I show how to do it in this video.
      th-cam.com/video/UHdktxjBjew/w-d-xo.html

  • @thedarkroomstudioworks6439
    @thedarkroomstudioworks6439 4 ปีที่แล้ว +2

    I just subscribed to your channel you are a boss brother thank you my yr and a half project does 47 on the straight away....woooooooooooohoooooooo!!!

    • @-DIYPRO-
      @-DIYPRO-  4 ปีที่แล้ว +2

      Awesome!

  • @jorgegonzales878
    @jorgegonzales878 4 ปีที่แล้ว +1

    Thanks for the video

  • @brandonblanco9400
    @brandonblanco9400 4 ปีที่แล้ว +2

    aren’t these types of karts belt driven with a gear reduction box? did u put that sprocket in the differential?

  • @pierredaniels6521
    @pierredaniels6521 3 ปีที่แล้ว +1

    Changed out the carb on mines the only way I can get it to start is if im holding the throttle. Carb was tuned to specks im lost on this one any pointers..
    O yea so when I was draing gas from the bowl I started it up just to see and it ran without shutting off the minute I closed the drain to stop the gas from leaking it shut off

    • @-DIYPRO-
      @-DIYPRO-  2 ปีที่แล้ว +1

      Late response but it sounds like an air / fuel mixture issue. Did you end up finding the issue?

  • @paranolia7130
    @paranolia7130 3 ปีที่แล้ว +2

    What if my turns on but when i switch to run it stalls out

    • @-DIYPRO-
      @-DIYPRO-  3 ปีที่แล้ว +1

      Have you tried cleaning the carb? It means you have a very small piece of dirt or dust that is not letting enough gas into the cylinder when you take the choke off. Clean the carb and that should do the trick.

  • @calebstoe2272
    @calebstoe2272 3 ปีที่แล้ว +1

    hey @Mech Master my go kart doesnt have that one bolt on the bottom of that goldish thing and mine is a trailmaster

    • @-DIYPRO-
      @-DIYPRO-  3 ปีที่แล้ว

      Is the bowl threaded? Wondering how you would take it off.

  • @tamidon40
    @tamidon40 5 ปีที่แล้ว +3

    Helped me immensely. Thanks!

    • @-DIYPRO-
      @-DIYPRO-  5 ปีที่แล้ว

      Good to know it helped someone!

  • @BAMaher
    @BAMaher 3 ปีที่แล้ว +2

    Need help with mine, it idles but it sounds like its cammed. Sometimes it dies out, then I have to pull it to start it, after doing that I try giving it throttle but it stalls. I've cleaned the whole carb, checked for air leaks. I'm super lost

    • @lucid4984
      @lucid4984 3 ปีที่แล้ว +1

      Same bro same

    • @BAMaher
      @BAMaher 3 ปีที่แล้ว +2

      @@lucid4984 i just figured out the problem, wasn't even the carburetor. It was the spark plug. Thing was fouled to hell and back with oil, and gas. Got myself a new spark plug and she runs like a dream now!

    • @lucid4984
      @lucid4984 3 ปีที่แล้ว +1

      @@BAMaher mine has a good spark, everything seems fine but I can’t tell so I’ll try the spark plug but I cleaned the carb and it won’t start at all

    • @BAMaher
      @BAMaher 3 ปีที่แล้ว +2

      @@lucid4984 dumb question, but do you have the motor choked when starting it? Also I'd try something here... squirt a little fuel in the cylinder threw the spark plug holes and see if it turns over

    • @BAMaher
      @BAMaher 3 ปีที่แล้ว +1

      @@lucid4984 when I worked on 2 strokes and couldn't get them started I did that all the time

  • @brayanzamudio9088
    @brayanzamudio9088 ปีที่แล้ว +1

    Hey i was wondering if you know how to fix a problem that i have on my predator 212 it only starts with starting fluid then it shuts off and I already put a new carburetor

    • @-DIYPRO-
      @-DIYPRO-  ปีที่แล้ว

      If it starts and then dies it's a carb issue. Was the carb an aftermarket one? Sometimes, even new ones, still have issues out of the box.

  • @levbargraser5665
    @levbargraser5665 4 ปีที่แล้ว +2

    what do i do if i cant get the jet out and i dont wanna strip it

    • @-DIYPRO-
      @-DIYPRO-  4 ปีที่แล้ว

      Soak it overnight in penetrating oil.

  • @WildfoxFabrication
    @WildfoxFabrication 5 ปีที่แล้ว +1

    that's cool! good info to know

  • @jackiecuen237
    @jackiecuen237 4 ปีที่แล้ว +1

    I used regular car oil for a go kart and it worked for about 10 minutes now it won't start could the oil be a problem its a brand-new go kart

    • @-DIYPRO-
      @-DIYPRO-  4 ปีที่แล้ว +1

      No, I've used car oil for years.

    • @Everlastandgreen
      @Everlastandgreen 3 ปีที่แล้ว

      One year late but the predator 212 is designed to turn off when the engine tips over. This is called the "oil sensor" which is the yellow cable next to the kill switch. You can youtube how to remove it. The engine will shut off when the oil is low and most of the time a 212 will be placed at a weird angel on a go cart making it shut off because the engine thinks it's not getting enough oil (even though it is)

  • @altonkenne579
    @altonkenne579 ปีที่แล้ว

    Make sure if you order this engine that it doesn't come from California or any state with emission laws that effect small engines I bought this engine and it ran rough. It surged smelled as if it was flooding studied up on it there is no adjustment for air fuel flow had to order a new adjustable carb. Only 22 dollars with tune up parts but from time engine arrived till use was 5 weeks. Beware !!!

  • @ave3911
    @ave3911 4 ปีที่แล้ว +1

    Mine starts. Stays on for like 10 seconds then it turns off. What should I do?

    • @-DIYPRO-
      @-DIYPRO-  4 ปีที่แล้ว

      Did you try cleaning out the jet? That would be my first guess of the issue. Since it starts the port for the choke is not clogged just the main jet.

  • @koreywilliams4570
    @koreywilliams4570 3 ปีที่แล้ว +1

    I just bought myself one and it won't start out of the box. I checked the spark and it works, I can smell fuel when I pull the cord. I'm thinking when I hooked up the new fuel line I messed with the carburetor and knocked something loose. I'll have to take a look at it tomorrow.
    I think I seen what I did wrong. What are those linkages you put on there at the end? What are those for because I took mine off and couldn't figure out where they went back on it.

  • @angelchavez5001
    @angelchavez5001 4 ปีที่แล้ว +3

    I tried the screw driver and didn’t work2:20

  • @tylersholtis2388
    @tylersholtis2388 3 ปีที่แล้ว

    I put the stage one kit from go power sports on the engine and I put the upgraded jet on there and now it won’t start? Do you think it’s because of the jet? Should I put the old one back on?

    • @Everlastandgreen
      @Everlastandgreen 3 ปีที่แล้ว

      TH-cam how to "tune a carberator" you could be giving it too much air and its choking. Or giving it too much fuel and its drowning. Since you put a stage 1 from powersports im guessing you put just the exaust pipe and air filter. Those air filters are huge!!! And giving it too much air. You'll need to tune it down because giving it to much air will choke it out. Might even have to change the air filter only

  • @bbaaspencer1
    @bbaaspencer1 4 ปีที่แล้ว +1

    I use only ethanol free gas in my go carts and mini bikes

    • @YoungCalister
      @YoungCalister 10 หลายเดือนก่อน

      What about 10% ethanol

  • @MrEricwms357
    @MrEricwms357 4 ปีที่แล้ว

    Nice‼

  • @crazyrussiankid2865
    @crazyrussiankid2865 3 ปีที่แล้ว +1

    Mine will run a little bit and go out the driveway and shut off

    • @-DIYPRO-
      @-DIYPRO-  3 ปีที่แล้ว +1

      I'd clean the carb again. Either the main get or the inlet is dirty. Sounds like a little is getting through when starting but not enough to keep it running.

  • @whiteboysteve4474
    @whiteboysteve4474 4 ปีที่แล้ว +1

    I break a small piece of welding wire just run it through the jet

  • @xoraika
    @xoraika 5 ปีที่แล้ว +1

    would a screw clog up the filter?

    • @-DIYPRO-
      @-DIYPRO-  5 ปีที่แล้ว

      Like an actual screw in which filter? The fuel filter, air filter?

  • @nickfischer933
    @nickfischer933 3 ปีที่แล้ว

    I have a new predator 212 motor that will not start