Dolomite fabrication & TR 7 update

แชร์
ฝัง
  • เผยแพร่เมื่อ 9 พ.ย. 2024

ความคิดเห็น • 6

  • @joechesney2665
    @joechesney2665 8 หลายเดือนก่อน +2

    Historic track car with the Sprint set up would be my choice👍

  • @daveharrison9319
    @daveharrison9319 8 หลายเดือนก่อน +2

    Good stuff,,the front leading edge of the cills are not correct..they taper into the body if you don't sort this you will have issues fitting the wings glass or steel also the inner splash Shields won't fit properly. I've built just a few of these shells and this we found out at our cost .👍🏻👍🏻.ps I've steel wings here..

    • @chelsiebrookes2470
      @chelsiebrookes2470  8 หลายเดือนก่อน +1

      It’s not going
      To
      Affect fitting
      The front
      Wings as it’s behind the front
      Wing the front wing has already been test fitted the car is
      Not going
      To be having splash shields
      Fitted as it’s going
      To be a track
      Car and
      It
      Will save weight

  • @RussellCooper
    @RussellCooper 8 หลายเดือนก่อน +1

    Couple of questions, how will your new water pump setup deal with circulation to the heater? Also, guessing you are running an electric fuel pump because of the pressure regulator mounted on the strut tower but you can use a low pressure pump so you don't need that?

    • @chelsiebrookes2470
      @chelsiebrookes2470  8 หลายเดือนก่อน +1

      The electric water pump actually circulates water better than the standard one so
      The heater is actually improved we do
      Have a low pressure fuel pump on the car the pressure regulator is actually a filter as well that’s why we fitted it

  • @daveharrison9319
    @daveharrison9319 8 หลายเดือนก่อน +1

    Look. On rimmers at sills section you will see your mistake. Better to fix this now .