Digital 24 eggs incubator begin to sell in June,2017 .The most useful machine for your home&farm. Whatsapp Maisy: +8613027243119 . #eggincubator #incubadora #incubation #incubator
What you'll notice is that when you are standing in front of the incubator and looking at it, there are four (4) buttons on the right side. The two (2) bottom buttons are self-explanatory as they are just "up" and "down" buttons. They will be utilized to adjust the displayed numbers up and down. "Up' raises the number, "down" lowers the number. Next, there is the button on the top left. It is the "rotate" button. This is for turning/rotating the eggs. Finally, there is the "set" button. It is directly to the right of the "rotate" button. This button is very important because it is what you will utilize to set your alarm highs and lows as well as your desired temperature. To utilize this button you will need to know the specific code for each desired effect. ----------------------------------------------------- Here are the codes: Low-Temperature Alarm = AL High-Temperature Alarm = AH Low-Humidity Alarm = AS ----------------------------------------------------- Low-Temperature Set = LS High-Temperature Set = HS ----------------------------------------------------- Temperature Sensor Calibration = CA ----------------------------------------------------- Heating Start = HU Heating Stop = HD ----------------------------------------------------- Now that you have the list of codes, you can set each of those parameters. Here is how you can do that: 1.) Press and hold the "set" button for 3 seconds. 2.) After 3 seconds you can toggle through each of the above-listed codes via the "up" and "down" buttons until you reach the code you want. 3.) Once you arrive at the desired code, press the "set" button one time. 4.) Finally, you can utilize the "up" and "down" arrows to make the desired parameter. That's all there is to it. If anyone has any questions or needs any help, just respond to my comment and I'll do my best to help. P.S. I'm not affiliated with the manufacturer or any seller of this unit. I am simply a customer who owns one and figured out how to use it.
I just got this incubator and no matter what I do the humidity reads 89%. I've unplugged it and counted a 30 and plugged it back in. I've drained all the water out. I put a fan in there trying to drain it out thinking maybe it soaked into the Styrofoam. And no matter what it shows back up at 89%.
maybe the environment humidity is a little higher; and you can follow the steps: 1.pls restore your incubator into factory setttings ,mauanl for reference : drive.google.com/drive/folders/1oLcVoF3JMvtKsrLQHHCpvBEUE29hcIOX?usp=sharing ; 2.pls dry the humidity sensor , in case there is water around ; 3.put the incubator out of the styrofoam ; hope it can help you more ;
the days can continue to 21 days. and when you use it for second hatching ,you should restore your incubator into factory setting ,the hatching days will clean to 0
Where do you get information about the little water droplet and the thermometer with a little wavy heat lines. How do you get them to appear or disappear and what do they mean? They're under the readout of the "Day".
hi friend , I can't understand you clearly , the incubator humidity display on the screen bcz humidity sensor inside the incubator, as well with temperature; "Day" means hatching days starts from the frist day you use the incubator;
hi friend , I can't understand you clearly , the incubator humidity display on the screen bcz humidity sensor inside the incubator, as well with temperature; "Day" means hatching days starts from the frist day you use the incubator;
Click here to order it: hhd.en.alibaba.com/product/60741054729-804897026/HHD_Mini_automatic_24_chicken_egg_incubators_price_for_sale.html?spm=a2700.icbuShop.89.7.7d445ac6r0g8bz
What does the code CS stand for? Also, how do you stop the humidity alarm from going off - the gauge does not seem to work and always stays below any optional setting - like 28?
I got the code when starting it, after I open the cover. It become normal back after about a minute. I think, the humidity sensor cant detect enough humidity in air, and it back to normal a few minute after closing the lid when vapour in air is enough to be detected.
se la schiusa delle uova di gallina, la temperatura / umidità è di 38 ° C / 45% -60% per i primi 18 giorni; e la temperatura / umidità è del 37,5 ° C / 60% -75% negli ultimi 3 giorni
Appena comprata.... ho messo un termostato supplementare per monitorare la temperatura. Ebbene impostando 38 gradi ho 37 gradi a livello uova e 41 gradi a livello area di schiusa (sotto il sistema di rotazione). Oltretutto non c'è un segnalatore che indica il livello di acqua all'interno, il rischio è di tracimare i canali facendo finire l'acqua su qualcosa di elettrico. Buttato 60 euro. La prossima sarà una BOROTTO.
What you'll notice is that when you are standing in front of the incubator and looking at it, there are four (4) buttons on the right side. The two (2) bottom buttons are self-explanatory as they are just "up" and "down" buttons. They will be utilized to adjust the displayed numbers up and down. "Up' raises the number, "down" lowers the number.
Next, there is the button on the top left. It is the "rotate" button. This is for turning/rotating the eggs.
Finally, there is the "set" button. It is directly to the right of the "rotate" button. This button is very important because it is what you will utilize to set your alarm highs and lows as well as your desired temperature. To utilize this button you will need to know the specific code for each desired effect.
-----------------------------------------------------
Here are the codes:
Low-Temperature Alarm = AL
High-Temperature Alarm = AH
Low-Humidity Alarm = AS
-----------------------------------------------------
Low-Temperature Set = LS
High-Temperature Set = HS
-----------------------------------------------------
Temperature Sensor Calibration = CA
-----------------------------------------------------
Heating Start = HU
Heating Stop = HD
-----------------------------------------------------
Now that you have the list of codes, you can set each of those parameters. Here is how you can do that:
1.) Press and hold the "set" button for 3 seconds.
2.) After 3 seconds you can toggle through each of the above-listed codes via the "up" and "down" buttons until you reach the code you want.
3.) Once you arrive at the desired code, press the "set" button one time.
4.) Finally, you can utilize the "up" and "down" arrows to make the desired parameter.
That's all there is to it. If anyone has any questions or needs any help, just respond to my comment and I'll do my best to help.
P.S. I'm not affiliated with the manufacturer or any seller of this unit. I am simply a customer who owns one and figured out how to use it.
thank you
Hi, Do we still need to turn the egg by hand (eg 180 degree) ? Or is the slight turning by the machine is enough ? Thank you
Hii sir I wanted to know that.
Can we even keep chick,s in that after taking out the egg rotator.
And even use it like a brooder
Hello , if I’m dry hatching how do I set the parameters for it not to beep at all for low humidity
Bonjour 👋 ,
Pouvez vous dire comment remettre à 0 le count down ? Merci 😊
I just got this incubator and no matter what I do the humidity reads 89%. I've unplugged it and counted a 30 and plugged it back in. I've drained all the water out. I put a fan in there trying to drain it out thinking maybe it soaked into the Styrofoam. And no matter what it shows back up at 89%.
maybe the environment humidity is a little higher; and you can follow the steps: 1.pls restore your incubator into factory setttings ,mauanl for reference : drive.google.com/drive/folders/1oLcVoF3JMvtKsrLQHHCpvBEUE29hcIOX?usp=sharing ; 2.pls dry the humidity sensor , in case there is water around ; 3.put the incubator out of the styrofoam ; hope it can help you more ;
My day seems to only go up to 10 days. Eggs take 21 days. Is it going to count on its own? Past 21 eventually?
the days can continue to 21 days. and when you use it for second hatching ,you should restore your incubator into factory setting ,the hatching days will clean to 0
Where do you get information about the little water droplet and the thermometer with a little wavy heat lines. How do you get them to appear or disappear and what do they mean? They're under the readout of the "Day".
hi friend , I can't understand you clearly , the incubator humidity display on the screen bcz humidity sensor inside the incubator, as well with temperature; "Day" means hatching days starts from the frist day you use the incubator;
hi friend , I can't understand you clearly , the incubator humidity display on the screen bcz humidity sensor inside the incubator, as well with temperature; "Day" means hatching days starts from the frist day you use the incubator;
Click here to order it: hhd.en.alibaba.com/product/60741054729-804897026/HHD_Mini_automatic_24_chicken_egg_incubators_price_for_sale.html?spm=a2700.icbuShop.89.7.7d445ac6r0g8bz
Only one side heating?????
What does the code CS stand for? Also, how do you stop the humidity alarm from going off - the gauge does not seem to work and always stays below any optional setting - like 28?
pls use the "AS” code and adjust it into 30%, the humidity will alarm when humidity below to 30%
What does the 4 buttons on the left do that have the little chickens on them?
nothing its not even buttons
I wondered the same thing. Why do they have colors associated with them if they do absolutely nothing.
How do I stop it beeping all the time and why when the temp; light go's out there is a letter H on the screen
I experienced the same problem and the eggs become too hot and died
Share order link: www.amazon.co.uk/dp/B08BZG3DXQ?ref=myi_title_dp
Where to get Hhd yz36 incubator,s egg turning tray and other parts in Pakistan
hi friend ,we don't have 36 incubator distributor in Pakistan ,you can order parts from us directly
Hello the code EE in humidity below what’s means please answer me
Even I face the same thing, can someone please help?
I got the code when starting it, after I open the cover. It become normal back after about a minute.
I think, the humidity sensor cant detect enough humidity in air, and it back to normal a few minute after closing the lid when vapour in air is enough to be detected.
Quanto acqua si mette e a che temperatura deve essere l'umidità
se la schiusa delle uova di gallina, la temperatura / umidità è di 38 ° C / 45% -60% per i primi 18 giorni; e la temperatura / umidità è del 37,5 ° C / 60% -75% negli ultimi 3 giorni
Ich brauche ne deutsche Anleitung… -.-'😡
Perché non fate la spiegazione in italiano
scusa amico, bcz non possiamo parlare italiano
Appena comprata.... ho messo un termostato supplementare per monitorare la temperatura.
Ebbene impostando 38 gradi ho 37 gradi a livello uova e 41 gradi a livello area di schiusa (sotto il sistema di rotazione).
Oltretutto non c'è un segnalatore che indica il livello di acqua all'interno, il rischio è di tracimare i canali facendo finire l'acqua su qualcosa di elettrico.
Buttato 60 euro.
La prossima sarà una BOROTTO.
Price
only 31usd you can get it ,more details , pls contact my email : maisy@nchoward.com ,thanks
give added u.a.e.
more details , pls contact my email : maisy@nchoward.com ,thanks