I find all these videos extremely useful. I love the way you’ve conducted yourself through the entire video, the way your objective, and the way you bring the value of the equipment for us to make a decision.
Same concentricity results with this $200 press as with the $800 German made "Heavy Prazipress. The Hornady Lock n Load inserts had no affect on concentricity between those two presses, as determined in your other videos. Very good info. Thanks.
Very nice video. I’ve just ordered a Marksman- about the only thing in stock these days. I am really impressed with this press and your video helped confirmed I’ve bought a good machine. Thank you
I don't envy many reloading benches but I envy yours! your track/rail system is genius. The MEC press looks like a winner and is a breath of fresh air in the metallic reloader market. A fine review.
His videos are outstanding. If you notice at the 10:10 marker the bench plate/rail allows the press to move towards the ram handle while he is seating the bullets. I wonder how much more it would Flex when F/L sizing 300 win mag brass? The rail system is a great idea and with HD steel mounting rails the flex would probably be eliminated.I like my presses to be rock solid mounted to the bench with no movement.
I agree about flex - my presses are rock solid on a very sturdy bench & are much nicer to use than when they were on a lighter bench with a touch of movement. The steel riser mounts offered by Inline Fabrications which Gavin often uses always display an amount of flex that would be more than I’d accept.
Just got one. I note that your ram is not resting all the way down too. I noticed that when the handle is screwed all the way in, it butts against the press not allowing the action to return to bottom. Same with the Inline Fab handle I got. I think the handle can be Dremeled to accomodate. But I will contact Inline before I do that. Threading back the handle to where the ram seats full bottom, the threads are barely protruding out the other side and doesn't insert all the way through the nut. I'm sure it will still operate fine, and it may not matter that the base doesn't seat all the way down. I don't have any regrets. I love the press and the Inline roller handle. Just FYI
have owned the Lee hand press since last may. Finally got around to loading 9mm last night. instantly regret waiting. already looking to crank out more, faster, more consistently. until today I must say I only knew of lee, rcbs, and hornady. I like what I just saw.
So you like the smooth balls eh? Just messin with ya! This looks like a great press. I have been looking at downsizing and leaving the ol rockchucker behind and this press is on my list.
MEC Marksman was just delivered and I de-primed about 1000 rounds of brass which was a mix of 45 ACP, 243, and 30-06 using the Lee Universal de-primer. The press is very well made, strong, resizing is not an issue. Some have noted that you have to prime off-press, however, I do not see this as an issue for a single stage press. Why? I find the RCBS bench primer a much better system and allows me one less step on the press. The open front is one of the main reasons I got this press as the off-set "O" is annoying at times. You have full view of what you are doing especially when mounted on the MEC Mount. Your review, early as it is, really helped my decision. Keep up the great reloading tips and reviews.
300win mag Tikka 1:11 twist 210gn ablr 69.6gn of 2213sc adi powder Seated .3off lands Shoots .3moa to .5moa thus rifle has lumley arms pillars and recoil lug plus atlasworks dbm and accurate 3.85mag length so i can use a magazine also new bolt stop and a terminator t2 brake its my fav. Shot a spiker at 730m take down! My 308 1:10 twist howa fluted heavy barrel in houge stock i use 190gn ablr with 43gn of 2208 adi which is varget. It gets .8-1moa.
I was glad to read that you checked the runout on more than just the one round you showed. All the presses will produce a great result some of the time. It's consistency that counts.Do you have a summary or a table someplace showing the runout of the other presses you have reviewed?
Wow, that's a great looking solid press!! I didn't know that they were getting into metallic case reloading. Even down to the nice color photos on the included instructions! They are doing it right.Great video!!
Hi from Canada, I'm new to reloading and have found your presentations so easy to understand, making the decision to start reloading less stressful. Your series on the MEC press had me convinced to buy it along with the Forster dies til I saw the RCBS Summit press. Now I'm not sure, both look to work great, any comments on the Summit press would be greatly appreciated. Will be trying to reloading precision .308 for a Savage 10 TR. Awesome vids
Awesome looking press. Looks to me like MEC took many of the best design elements from other presses and put them in one machine. Curious to know how well the spent primer catcher works, since I've had quite a few primers spit out of Redding Big Boss and RCBS RCII presses over the years. Also, I was initially surprised to see no priming system on this, but after thinking on it, not sure this is a big deal since I rarely prime on the press with a single stage anyhow. And great video by the way...looking forward to seeing more in this series!
Hi Gavin I really appreciate your channel and the reviews you do. I am trying to decide between the MEC Marksman and the Hornady Lock-N-Load Iron press. Another one that is my true favorite is the Forrester Co-Ax, but the price on it is just to much more than the other 2. What would be your choice between the MEC and the Iron press. And also do you think the extra cost of the Forrester would be justified over those?
Just learned of this press. Looks like MEC did some homework on the design. I wouldn't mind having one but have a RockChucker and a Lyman Spartan. Like the open front of the MEC.
So you have a selection of presses now. This press looks impressive and well build. I like the self-alignment idea. That being said, out of all the single stage presses you've used. What one do you prefer the most.?
It all depends on your reloading process (example: do you need to prime on-press), budget, etc. I still have some presses to try as well: Forster Co-Ax, LEE Classic Cast Iron single stage, etc. The Marksman is probably the slickest in terms of cycling, the Iron Press is the only one with a fully-automatic slide-bar tube primer, and the Redding Big-Boss II is a very high quality rig as well (manual on-press primer works GREAT). What do you want to do with a single-stage?
gavintoobe I mainly do long range precision shooting. I run the big Lee press now after my Hornady was introducing .004 runout on all my cases. The Lee does ok, and it's a good press. But I like the idea of the floating shell holder like foster has. Seems like that would help allow the case in to the die with no angle or side pressure if it's not aligned perfect.
The MEC Marksman has a floating shellholder- may want to give that a look! ultimatereloader.com/2017/01/05/mec-marksman-single-stage-unboxing-overview-setup/
Great video. Question... Why didn't you lube the cases first before loading them? If you did, you might want to mention that so someone doesn't stick a case!!! Just a suggestion! Some people think that all videos they see on reloading on TH-cam are safe and sound. As you well know, this is not the case at all. Your videos are all Top Notch!! Thanks...
Excellent review as always, I wasn't even aware of this press until I saw this video. I really like the finish on the press, it looks high quality, at least in the video. I also like the floating case holder feature. I don't care about priming on the press, I'd rather use the Lee Auto Bench Primer. BUT, big question: where is the MEC press made? Thanks.
Hi from France, thanks for this vid but about Hornady Concentricity Tool, there is a high need of explanation and a lot of shooters don't understand the use of it .
I plan on replacing my Rock chucker supreme to take advantage of the floating shell plate holder to get better consentricity when seating bullets. I read in Glen Zedekers book the he recommends replacing the metal clip that is used on most press rams with a rubber o-ring. Do you know if this will work just as well? Thanks, Steve
Steve- if you want the float, the MEC Marksman has it from the get-go- and you can add the Hornady lock-n-load bushing system as well ($15. upgrade, money well spent).
Good evening I saw the review of the press MEC Marksman, it would seem of good quality! What would you recommend between redding big boss, rcbs Rock Chucker and MEC marksman?
Was it just an odd camera thing, or was that ram polished? If so, that's awesome. I'd love to see how it performs, leverage-wise, with brass forming or resizing magnum cartridges. Thanks for the video!
I plan on replacing my Rock chucker supreme to take advantage of the floating shell plate holder to get better consentricity when seating bullets. I read in Glen Zedekers book the he recommends replacing the metal clip that is used on most press rams with a rubber o-ring. Do you know if this will work just as well? Thanks, Steve
It looks like the 7/8x14 thread in the press is in a boss that might be removable. Is that the case? Can you also use this press with larger diameter dies?
Gavin: Do you think it is possible to use a LnL bushing system like you can with the RCBS and other presses? And index them so that they run at the same height as a LnL progressive? How would you compare the leverage to a Iron Press? Im in the market for a new single stage, and leverage is a big deal because I size alot of 7.62X51 LC brass for 308. Thanks!
I bought this press because of your glowing review. Since purchasing and using it I'm finding 3 to 4 thousands of flex while resizing 6.5 Creedmoor. Is this normal or acceptable for a quality press.
That's strange- what sizing die, and how did you set it up? Are you checking with a headspace gauge like this one? www.amazon.com/Hornady-HK66-Lock-N-Load-Headspace-Gauge/dp/B000PD5VN8
In so childish i laughed when you said you like the smooth balls lol but this look like an awesome press, im stuck between this and the co ax so i can do 6.5 creedmoor
I would think that they would perform fairly similarly with the exception of the floating shell holder. However, that is more for those who are working on grasping the last little bit of accuracy out of their reloads that they can and not for the standard reloader. For the vast majority of even precision shooters, your RCBS Summit is a fantastic press. Personally, I have been putting up with the poor concentricity of my Lee Turret press and will probably be making the switch to this. I have been eyeballing the Forster Coax for a long time, but I think I like this design and price better.
Hey Gavin I think I'm going to purchase this press, as I am new to reloading and have yet to load a single case this seems to be fit what for me i.e. each step is done individually as this will help me with safety as well as overall precise loading during each step. Also being Made in America is very important to me. I was gifted a Dillion 450 jr by my father in law which is in as new condition in the box I am not going to use it until I am well versed in reloading... my new RPR ENHANCED IN 6.5 Creedmoor is in the box and unfired until I get all my reloading gear and bench in order then I will get busy here on the farm doing my load work - up and turret tracking etc... get ready for lots of questions .... thanks for all you're help Jack.
Your review failed to mention that the Marksman does not go past center when the ram is at the top of the stroke. It appears to stop on the linkeage before reaching the breakover point. I probably would not have bought one if I knew this.
Lots of variables- still need to do more scientific measurements- including neck runout (thinking to get Sinclair tool). But, the Marksman has produced some *great* results with bullet runout!
I'm so interested in reloading. Especially with a progressive. But all presses seem to have mixed reviews and quite frankly, it's turning me off from the idea. Am I missing something? or is it really that risky to spend such money and still have problems of stuff not working as advertised. Because all press Manufacturers seem to have their "it's a pos" reviews. Should I just disregard and chalk it up to that just being guys who didn't read the instructions? I've never reloaded, but am eyeing the Hornady LNL. I understand the issue of needing more parts than just the press, set up and fine tuning, but is that a good press to start off with? I'm not one for "entry level" anything. If I get into something, I want the best, and do not want to spend money later to upgrade. Though I don't want to spend $1000 on just a press.
Your experience here is why I started Ultimate Reloader, literally. I spent countless hours online deciding on a press upgrade. What are your requirements? Rounds/month, # of calibers, etc. Lock-N-Load is a great press, and the "Get Loaded" (500 free bullets) sweetens the deal.
I'm not going to pick this press apart and ask where is this or where is that. It seems to me that MEC is testing the waters to see what kind of interest there is is the metallic reloading market before they go and start with turret presses, primer tubes and the like with regards to accessories. I only say that because that is smart business and that's what I would do as a business, only makes sense. It's going to be a system to keep on your radar in the coming years IMHO. MEC don't mess!
gavintoobe fantastic, I love midsouth ordered my last 300 75gr bullets from them to test for long-range competition. to be able to directly support them would be even better.
Looks like a great press. I’m worried about how you measured runout though. In terms of run out, the case should be held by the body and case head. Then the bullet should be checked at ogive or just in front. This is due to the datum scheme of a rifle chamber.
I'm in the market for a new press. Do you get to keep all the gear you review or do you have to return it at some point? If this is all yours, would you mind doing a press shootout? I know you really couldn't go wrong with any of the presses you own, but it would be interesting to find out the idiosyncrasies between each of them to help buyers decide which would fit their needs best.
Hi Gavin. Love all your videos, just finished my take on the ultimate reloader bench system. I was considering purchasing the MEC Marksman press but I am concerned that it may not work on my table due to the location of the spent primer tray. I set a 2x4 apron at the front edge of my table so I'm worried the spent primer tray will hit that. I would like to mount the press without using the additional mounting stand. I am curious, how far down does the tray sit below where you mount the press, and how far back does it stick out? I've been trying desperately to find this information but no luck so far. I saw one video where the guy had to cut a spot out of his apron and I'd like to avoid that. Thanks! Keep the videos coming! th-cam.com/video/YWmznm1PNac/w-d-xo.html
I just received my Marksman, and my first impressions of it are terrible. The entire front and back of the vertical supports have gouges where someone took an angle grinder and chewed up the surface prior to powder coating it. It's hard for me to have any kind of confidence that there is any kind of precision in this press, if they are willing to do this. I called to talk with them and got the too bad, so sad, but that is the way they are line. This is a crock.
I find all these videos extremely useful. I love the way you’ve conducted yourself through the entire video, the way your objective, and the way you bring the value of the equipment for us to make a decision.
Same concentricity results with this $200 press as with the $800 German made "Heavy Prazipress. The Hornady Lock n Load inserts had no affect on concentricity between those two presses, as determined in your other videos. Very good info. Thanks.
I really like the smooth balls too. They feel so nice in your hand. My Redding T-7 Turret press has a similar handle.
Very nice video. I’ve just ordered a Marksman- about the only thing in stock these days. I am really impressed with this press and your video helped confirmed I’ve bought a good machine. Thank you
I don't envy many reloading benches but I envy yours! your track/rail system is genius. The MEC press looks like a winner and is a breath of fresh air in the metallic reloader market. A fine review.
Thanks man!
His videos are outstanding. If you notice at the 10:10 marker the bench plate/rail allows the press to move towards the ram handle while he is seating the bullets. I wonder how much more it would Flex when F/L sizing 300 win mag brass? The rail system is a great idea and with HD steel mounting rails the flex would probably be eliminated.I like my presses to be rock solid mounted to the bench with no movement.
@@Airtractorfan1963 that flex would drive me nuts.
I agree about flex - my presses are rock solid on a very sturdy bench & are much nicer to use than when they were on a lighter bench with a touch of movement. The steel riser mounts offered by Inline Fabrications which Gavin often uses always display an amount of flex that would be more than I’d accept.
Just got one. I note that your ram is not resting all the way down too. I noticed that when the handle is screwed all the way in, it butts against the press not allowing the action to return to bottom. Same with the Inline Fab handle I got. I think the handle can be Dremeled to accomodate. But I will contact Inline before I do that. Threading back the handle to where the ram seats full bottom, the threads are barely protruding out the other side and doesn't insert all the way through the nut. I'm sure it will still operate fine, and it may not matter that the base doesn't seat all the way down. I don't have any regrets. I love the press and the Inline roller handle. Just FYI
have owned the Lee hand press since last may. Finally got around to loading 9mm last night. instantly regret waiting. already looking to crank out more, faster, more consistently. until today I must say I only knew of lee, rcbs, and hornady. I like what I just saw.
Nice, sounds like you're off and running!
So you like the smooth balls eh?
Just messin with ya! This looks like a great press. I have been looking at downsizing and leaving the ol rockchucker behind and this press is on my list.
Good stuff as always. Just a solid channel and blog.
Thanks kerleydue!
MEC Marksman was just delivered and I de-primed about 1000 rounds of brass which was a mix of 45 ACP, 243, and 30-06 using the Lee Universal de-primer. The press is very well made, strong, resizing is not an issue. Some have noted that you have to prime off-press, however, I do not see this as an issue for a single stage press. Why? I find the RCBS bench primer a much better system and allows me one less step on the press. The open front is one of the main reasons I got this press as the off-set "O" is annoying at times. You have full view of what you are doing especially when mounted on the MEC Mount. Your review, early as it is, really helped my decision. Keep up the great reloading tips and reviews.
300win mag
Tikka 1:11 twist
210gn ablr
69.6gn of 2213sc adi powder
Seated .3off lands
Shoots .3moa to .5moa thus rifle has lumley arms pillars and recoil lug plus atlasworks dbm and accurate 3.85mag length so i can use a magazine also new bolt stop and a terminator t2 brake its my fav.
Shot a spiker at 730m take down!
My 308 1:10 twist howa fluted heavy barrel in houge stock i use 190gn ablr with 43gn of 2208 adi which is varget. It gets .8-1moa.
I was glad to read that you checked the runout on more than just the one round you showed. All the presses will produce a great result some of the time. It's consistency that counts.Do you have a summary or a table someplace showing the runout of the other presses you have reviewed?
Wow, that's a great looking solid press!! I didn't know that they were getting into metallic case reloading. Even down to the nice color photos on the included instructions! They are doing it right.Great video!!
Thanks! Yes, they have started with a "bang" !
Good report, floating shell holder is very simple but effective. Pity they don't have an option to load primers. regards john
Hi from Canada, I'm new to reloading and have found your presentations so easy to understand, making the decision to start reloading less stressful. Your series on the MEC press had me convinced to buy it along with the Forster dies til I saw the RCBS Summit press. Now I'm not sure, both look to work great, any comments on the Summit press would be greatly appreciated. Will be trying to reloading precision .308 for a Savage 10 TR. Awesome vids
Would love to see a video on the Forster Co-Ax press and your thoughts. Great videos as always.
Cool- it's on my list!
Now that you've got both, which do you prefer?
Awesome looking press. Looks to me like MEC took many of the best design elements from other presses and put them in one machine. Curious to know how well the spent primer catcher works, since I've had quite a few primers spit out of Redding Big Boss and RCBS RCII presses over the years. Also, I was initially surprised to see no priming system on this, but after thinking on it, not sure this is a big deal since I rarely prime on the press with a single stage anyhow.
And great video by the way...looking forward to seeing more in this series!
Hi Gavin I really appreciate your channel and the reviews you do. I am trying to decide between the MEC Marksman and the Hornady Lock-N-Load Iron press. Another one that is my true favorite is the Forrester Co-Ax, but the price on it is just to much more than the other 2. What would be your choice between the MEC and the Iron press. And also do you think the extra cost of the Forrester would be justified over those?
Hello, which press did you buy in the end?
Will a wildcatter be happy with the leverage this press generates for reshaping brass into other interesting cartridges?
...and now I want one! Thanks for the video!
Hi Gavin,
Nice clear video (as always).
Was the concentricity about the same on all the rounds you seated or did you only measure the first one ?
Some variation, but all were within about +/- .001" - very good!
Just learned of this press. Looks like MEC did some homework on the design. I wouldn't mind having one but have a RockChucker and a Lyman Spartan. Like the open front of the MEC.
Yeah, it's a great design and built really well.
So you have a selection of presses now. This press looks impressive and well build. I like the self-alignment idea. That being said, out of all the single stage presses you've used. What one do you prefer the most.?
It all depends on your reloading process (example: do you need to prime on-press), budget, etc. I still have some presses to try as well: Forster Co-Ax, LEE Classic Cast Iron single stage, etc. The Marksman is probably the slickest in terms of cycling, the Iron Press is the only one with a fully-automatic slide-bar tube primer, and the Redding Big-Boss II is a very high quality rig as well (manual on-press primer works GREAT). What do you want to do with a single-stage?
gavintoobe I mainly do long range precision shooting. I run the big Lee press now after my Hornady was introducing .004 runout on all my cases. The Lee does ok, and it's a good press. But I like the idea of the floating shell holder like foster has. Seems like that would help allow the case in to the die with no angle or side pressure if it's not aligned perfect.
The MEC Marksman has a floating shellholder- may want to give that a look! ultimatereloader.com/2017/01/05/mec-marksman-single-stage-unboxing-overview-setup/
Great video. Question... Why didn't you lube the cases first before loading them? If you did, you might want to mention that so someone doesn't stick a case!!! Just a suggestion! Some people think that all videos they see on reloading on TH-cam are safe and sound. As you well know, this is not the case at all. Your videos are all Top Notch!! Thanks...
A review on the Forster Co Ax is missing on the Ultimate Reloader's channel.
Yes, it's on my list!
Excellent review as always, I wasn't even aware of this press until I saw this video. I really like the finish on the press, it looks high quality, at least in the video. I also like the floating case holder feature. I don't care about priming on the press, I'd rather use the Lee Auto Bench Primer. BUT, big question: where is the MEC press made? Thanks.
Made right here in the USA!
gavintoobe Wow, nice!
Just bought the press, what are the sizes of the mounting screws for the press and the stand!
Excellent video
Hi from France, thanks for this vid but about Hornady Concentricity Tool, there is a high need of explanation and a lot of shooters don't understand the use of it .
I plan on replacing my Rock chucker supreme to take advantage of the floating shell plate holder to get better consentricity when seating bullets.
I read in Glen Zedekers book the he recommends replacing the metal clip that is used on most press rams with a rubber o-ring.
Do you know if this will work just as well?
Thanks,
Steve
Steve- if you want the float, the MEC Marksman has it from the get-go- and you can add the Hornady lock-n-load bushing system as well ($15. upgrade, money well spent).
Good review, how did you do deer hunting with the 25-45?
I didn't see anything, just a bunch of sign. Hoping for better results next year! More .25-45 Sharps content coming here soon...
Good evening I saw the review of the press MEC Marksman, it would seem of good quality! What would you recommend between redding big boss, rcbs Rock Chucker and MEC marksman?
Was it just an odd camera thing, or was that ram polished? If so, that's awesome. I'd love to see how it performs, leverage-wise, with brass forming or resizing magnum cartridges. Thanks for the video!
Ram is turned, ground, and polished!
What is your opinion on the Mac Marksman press vs the Forster CoAx press
Both have their advantages- what is it you plan on doing?
I plan on replacing my Rock chucker supreme to take advantage of the floating shell plate holder to get better consentricity when seating bullets.
I read in Glen Zedekers book the he recommends replacing the metal clip that is used on most press rams with a rubber o-ring.
Do you know if this will work just as well?
Thanks,
Steve
is the shell holder wire easily removable? and will the rcbs primer pocket swage tool fit over the ram?
thanks
It looks like the 7/8x14 thread in the press is in a boss that might be removable. Is that the case? Can you also use this press with larger diameter dies?
Willy- I believe so- more on that shortly! (Lock-N-Load conversion kit is something I'm planning to test)
Looking forward to the review on the LNL conversion. Soon I hope
How would you compare this to the Forster? I'm in the market for a new single stage and the Forster was at the top of my list.
Forster is on my list! Don't have one yet.
Looks like I got one before you, lol. :) Grafs has them on sale for $289. :)
Gavin:
Do you think it is possible to use a LnL bushing system like you can with the RCBS and other presses? And index them so that they run at the same height as a LnL progressive? How would you compare the leverage to a Iron Press? Im in the market for a new single stage, and leverage is a big deal because I size alot of 7.62X51 LC brass for 308. Thanks!
Both presses have good leverage, the Iron press costs more, but does have on-press priming- decisions decisions!
Thanks for the info.
Thanks Gavin.
Will one of those work on the Präzipress 120mm Reloading Press?
with the redding resizing did you not have to lube the cases?
Always use lube when sizing bottleneck rifle cases! Else you will stick a case in the die. :)
where can i get the UL sub plate for mounting?
I bought this press because of your glowing review. Since purchasing and using it I'm finding 3 to 4 thousands of flex while resizing 6.5 Creedmoor. Is this normal or acceptable for a quality press.
That's strange- what sizing die, and how did you set it up? Are you checking with a headspace gauge like this one? www.amazon.com/Hornady-HK66-Lock-N-Load-Headspace-Gauge/dp/B000PD5VN8
How does this compare to the Hornady Iron Press? Which one do you prefer?
Which case lube do you use when doing brass like this. I made my own from lanolin oil and lab grade isopropyl alcohol. Just curious.
In so childish i laughed when you said you like the smooth balls lol but this look like an awesome press, im stuck between this and the co ax so i can do 6.5 creedmoor
is it possible to use the quick change bushing on the press
I'm going to try, and will let you know (Hornady Lock-N-Load bushing conversion kit)
thanks mate.
how does it compare to the other presses in the same price range? I have a rcbs summit but i am looking for a 2nd press to purchase.
I would think that they would perform fairly similarly with the exception of the floating shell holder. However, that is more for those who are working on grasping the last little bit of accuracy out of their reloads that they can and not for the standard reloader. For the vast majority of even precision shooters, your RCBS Summit is a fantastic press.
Personally, I have been putting up with the poor concentricity of my Lee Turret press and will probably be making the switch to this. I have been eyeballing the Forster Coax for a long time, but I think I like this design and price better.
Hey Gavin I think I'm going to purchase this press, as I am new to reloading and have yet to load a single case this seems to be fit what for me i.e. each step is done individually as this will help me with safety as well as overall precise loading during each step. Also being Made in America is very important to me. I was gifted a Dillion 450 jr by my father in law which is in as new condition in the box I am not going to use it until I am well versed in reloading... my new RPR ENHANCED IN 6.5 Creedmoor is in the box and unfired until I get all my reloading gear and bench in order then I will get busy here on the farm doing my load work - up and turret tracking etc... get ready for lots of questions .... thanks for all you're help Jack.
Awesome Jack- you're going to have a very fun and gratifying journey shooting your RPR and loading for it!
Where can you find a good price? It seemed that the price took a big jump.
You check run out on one round?
how much would you sell the ultimate reloader base setup you got there?? you said on another video you would sell them if ppl wanted them.. I do..
Your review failed to mention that the Marksman does not go past center when the ram is at the top of the stroke. It appears to stop on the linkeage before reaching the breakover point. I probably would not have bought one if I knew this.
Do you get similar run out results when using that die on a different press? Thanks.
Lots of variables- still need to do more scientific measurements- including neck runout (thinking to get Sinclair tool). But, the Marksman has produced some *great* results with bullet runout!
will lock n load quick change system fit this ?
I'm just about to test that, stay tuned!
So what press do you like better? The MEC or the Forster?
I'm so interested in reloading. Especially with a progressive. But all presses seem to have mixed reviews and quite frankly, it's turning me off from the idea. Am I missing something? or is it really that risky to spend such money and still have problems of stuff not working as advertised. Because all press Manufacturers seem to have their "it's a pos" reviews. Should I just disregard and chalk it up to that just being guys who didn't read the instructions? I've never reloaded, but am eyeing the Hornady LNL. I understand the issue of needing more parts than just the press, set up and fine tuning, but is that a good press to start off with?
I'm not one for "entry level" anything. If I get into something, I want the best, and do not want to spend money later to upgrade. Though I don't want to spend $1000 on just a press.
Your experience here is why I started Ultimate Reloader, literally. I spent countless hours online deciding on a press upgrade. What are your requirements? Rounds/month, # of calibers, etc. Lock-N-Load is a great press, and the "Get Loaded" (500 free bullets) sweetens the deal.
Thanks. Right now I'm shooting up to 200 9mm a week. But I shoot 223, 7.62 and in the near future 270.
What is that fore?
Is that a 7/8-14 insert in the press? Can it be removed so a Hornady LnL bushing can be inserted?
Funny you mention that. The answer is: Yes, and I already shot a video that shows the Lock-N-Load conversion kit install (stay tuned!)
very cool. MSRP?
It's in the write-up (see link at top of video description) - lots of info in that post!
I'm not going to pick this press apart and ask where is this or where is that. It seems to me that MEC is testing the waters to see what kind of interest there is is the metallic reloading market before they go and start with turret presses, primer tubes and the like with regards to accessories. I only say that because that is smart business and that's what I would do as a business, only makes sense. It's going to be a system to keep on your radar in the coming years IMHO. MEC don't mess!
will it work with Hornady Lock and Load bushings?
I'm going to try here soon!
Any progress press in their future?
I'm not sure!
push midsouth to get match monster in .224 69-77gr , and 6.5. those things would fly off the shelf
I just talked to them and shared your suggestions!
gavintoobe fantastic, I love midsouth ordered my last 300 75gr bullets from them to test for long-range competition. to be able to directly support them would be even better.
Does this press have a cam over?
No, it's a positive stop. I like the way it works with sizing dies, etc.
Thanks!
Great video, sub from me. Question.... Will the MEC Marksman accommodate 1 1/4 dies?
The threading is there- I installed the Lock-N-Load bushing conversion, but I'm not sure about clearance, etc for loading with 1 1/4 dies. :)
I am trying to fin the Height, Width and thickness of the metal of the mount, can anyone help me? Thanks.
Looks like a great press. I’m worried about how you measured runout though. In terms of run out, the case should be held by the body and case head. Then the bullet should be checked at ogive or just in front. This is due to the datum scheme of a rifle chamber.
I'm in the market for a new press. Do you get to keep all the gear you review or do you have to return it at some point? If this is all yours, would you mind doing a press shootout? I know you really couldn't go wrong with any of the presses you own, but it would be interesting to find out the idiosyncrasies between each of them to help buyers decide which would fit their needs best.
I have to keep all of the gear on hand for ongoing stories, that's a great idea, the shootout!
Awesome!! I hope you can make it happen. I'll even fly out to help test hahaha
would be nice if you could install a hornady lnl conversation
You can, and I have a video for that! (with tips/tricks): th-cam.com/video/V9QHI7_5xwg/w-d-xo.html
gavintoobe oh cool. looked like the threads were cast in
They have been 9.99 at midway for awhile. Bought 4 sets. Conversions cheaper then the 3pc bushing
How does this compare to the Forster press?
I don't have the Forster press, but it's on my list...
And the $ is ?
Today it's $179.99 at Midsouth: www.midsouthshooterssupply.com/item/000591311080/mec-marksman-single-stage-reloading-press
At 3:07, so you like the smooth balls, eh?
haha
The Redding die is the reason you had no runout!!!!!
Hanzhen harmonic drive gear , strain wave reducer,
robot arm joint , over 30 years experience
They changed the handle. It no longer has the nice glossy ball.
Hi Gavin. Love all your videos, just finished my take on the ultimate reloader bench system. I was considering purchasing the MEC Marksman press but I am concerned that it may not work on my table due to the location of the spent primer tray. I set a 2x4 apron at the front edge of my table so I'm worried the spent primer tray will hit that. I would like to mount the press without using the additional mounting stand. I am curious, how far down does the tray sit below where you mount the press, and how far back does it stick out? I've been trying desperately to find this information but no luck so far. I saw one video where the guy had to cut a spot out of his apron and I'd like to avoid that. Thanks! Keep the videos coming!
th-cam.com/video/YWmznm1PNac/w-d-xo.html
MSRP $225.0 for a single stage press? Holy wah!
Street price is about $180.
show brow
Nice video but you reloading bench is way too clean. lol
I will try and trash it up. :)
:-)
I just received my Marksman, and my first impressions of it are terrible. The entire front and back of the vertical supports have gouges where someone took an angle grinder and chewed up the surface prior to powder coating it. It's hard for me to have any kind of confidence that there is any kind of precision in this press, if they are willing to do this. I called to talk with them and got the too bad, so sad, but that is the way they are line. This is a crock.
rcbs, lee, rest junk
Where does the spent primers go and where do you pur the new primers in.