ANSYS Fluent Tutorial | Analysis of Double Pipe Counterflow Heat Exchanger | ANSYS 19 R3 | Part 1/3

It is an analysis of a Counterflow Heat exchanger, to cool the engine oil for a large industrial gas turbine engine. The flow rate of cooling water through the outer annulus is 0.3 kg/s and the flow rate of engine oil through the inner tube is 0.01 kg/s. The water and oil enter the outer annulus and inner tube at temperatures of 293 K and 423K respectively. The wall thickness of the oil tube is 2 mm.
Part 1: Geometry: • ANSYS Fluent Tutorial ...
Part 2: Meshing: • ANSYS Fluent Tutorial ...
Part 3: Solver setup & Post Processing : • ANSYS Fluent Tutorial ...
What will you learn from this tutorial?
- Application of the linear pattern in ANSYS workbench.
- Use of sweep tool to create Curved profiles in ANSYS Workbench.
- Add frozen and Add material in ANSYS.
- The boolean operation to unite and subtract bodies in ANSYS.
More Tutorials On our Channel Page: / ansystutor
Please subscribe to our channel if you find these tutorials helpful.
Hit like , and comment below, share this video with your friends.
You can connect with us through Facebook, Telegram, Instagram, and Linkedin.
Visit our blog: ansys-tutor.blogspot.com/

[@mateussousa3639]

Your video series is amazing. Awesome work. Thank you for sharing.

[@AnsysTutor]

Thanks for your compliment.🥰🥰🥰

[@VMTDesign]

I love you!

[@AnsysTutor]

Thank you.

[@hvcxguhtui9531]

I have a report or a practical study for the Al-Ansas program, but I do not know if I can start working with the report
(Counter flow air heat exchanger)

[@pranithshetty6640]

Hi! Can you tell me how to enable turbomodeller on anys student version

[@abdelrahmanmohammad3554]

Very Nice,, Thanks a lot

[@AnsysTutor]

You are most welcome.

[@madhulatha65]

Thanks a lot

[@AnsysTutor]

You are welcome.

[@taranathsbhat1649]

Very Nice Video Sir. How Did you select The Dimensions Sir, Did You Review a Literature ?

[@AnsysTutor]

This is a request from one of our viewer , it is a University assignment.

[@aadithyakrishna3054]

Nice video

[@AnsysTutor]

Thank you.

[@Piyush2as]

Dear Sir is it possible for you to show the U-tube shell and tube heat exchanger analysis?
Thanking you in Advance

[@AnsysTutor]

It's similar to this, only geometry is different.

[@ianm1898]

Hi,if we do in 2D, should I define a wall or interface for the two fluid domain?

[@AnsysTutor]

You should define those as coupled wall for walll heat conduction.

[@ianm1898]

@@AnsysTutor thank you so much
by the way,if you have time
would you like to make a tutorial about compressible flow in 2d? something like steam ejector that suct an air
I often face difficulties to get convergence, it's been 25K of iterations but still only 0,01 in residual
thank you so much

[@pranithshetty6640]

Hi! Can you tell me how to enable turbomodeller on Anys student version

[@AnsysTutor]

It might not be there in student version.

[@nikheeljoshi3524]

Sir can u tell me plz, in coincident u select 2 points or u select only circle middle

[@AnsysTutor]

Coincidence of circle center with the default axis.

[@nikheeljoshi3524]

@@AnsysTutor accha tnk u sir

[@nikheeljoshi3524]

One more que. Sir this values r std. Or taken from somewhere

[@viethung5253]

very nice bro, please send me file STEP! thank you so much