the only problem I have with Nick's idea is that it does basically the opposite of what the tik-tok idea is supposed to do- it makes the wine glasses more likely to be tipped over (and also I doubt I could get that flat enough so they don't wobble)
@@contra1124 the added weight might actually make it harder to tip over, even if it's the same sized base. Yeah, getting it level could be hard, but the resin would also self level
I actually prefer your version of the wine glasses. And with Christmas just around the corner I'm going to try to make a set too look like wreaths! Awesome video as always
I love the first one with the dried flowers and yes it would make a fine wall art. And the wine glasses are a great idea, I've never seen anything out there like that.
I can't tell you how happy I am to see you branching out and having more fun with resin and trying more funky ideas!!! Looking forward to you taking those ideas and mixing them in with your woodturing and creating your own NEW TREDNING RESIN ARTWORK PIECES!! BLESSINGS AND LOVE TO YOU AND YOUR FAMILY 🤗🙏🏻💜✨🕊️
Everything turned out amazing. I love how you took the ideas and made them yours. Plus you gave a big shout out to each of the makers that gave you inspiration. It's really cool that you branched out into new things. Crafters or makers should never be in competition with each other but should always inspire each other to try new things and encourage themselves and others to create. Thank you as always for sharing, inspiring, creating and mentoring all in crafting expression.
I think the point of the paw on the charger cable is to protect the area where the cable meets the connector, since that is usually where these things break. If you cover this up in a big chunk of resin, your charger cable might last longer. The way you did it, it's purely decorative, which is obviously still fine.
I was thinking the same thing, if he would have known to do so all he would've had to do to correct that would've been to pull the charger back through that hole to where at least half the housing of the contact part is sticking out of the mold and then it would be both functional and decorative
@@hefoxed to be 100% honest I don't know that, but my guess would be no, just for the fact that the wires are compressed pretty well along the length of the cord itself, but the main part that fails in question would be where the housing of the port contact and wire meet can be a weak point simply because it's 2 different pieces being joined together and tend to want to separate over time due wear and tear as it's being used, as for the wire it self is rather flexible and is one continuous molded rubber piece way less prone to wear and tear.
It would definitely just introduce a new stress point so I think this might be an accessibility thing! Make it easier for people with diminished dexterity to handle the cord! So still a great idea
Hi Nick, the lightning cable needed to be further back to stiffen it so as to prevent the flexible part from pulling out of the connector. It's a common fault with them. By using the paw, you pull on the connector and not the cable so it will last longer.
That flower and wood one is absolutely beautiful! And love the photo one! What fun! 😃 it was so fun to watch you try new things 😃
ปีที่แล้ว +3
I enjoyed your version of the pyramid. The bubbles on the rose could be interpreted as some sort of underwater geyser with a flower in the middle of it. Actually that might be a good idea to explore and I think that might turn funky!
I'm going thru my kitchen cupboards looking for stuff I can resin - I have lots of charms and trinkets and small shells and small starfish, ribbons, buttons....all kinds of inspirational stuff. Thanks Nick. Can't wait till morning.
Thanks for the cute project you just did. I was hoping you would use enough resin to completely cover the flowers to make either a cutting board or serving tray. All the Tic Tok projects were cool! Thank you Lord Zammeti!
Actually the right resin properly cured is food safe since once hardened it is essentially chemically dormant probably safer Actually then many plastics
@@KaivalaJenva I don't know if that's the case for cutting boards though. It might be fine, but I would be worried about little pieces of it getting in the food from the knife work. For a serving tray, a table, or kitchen counters, it's absolutely fine in my opinion.
This was fun. I'd like to see more episodes like this (even if they fail spectacularly). It's a good time watching you try new stuff. Thanks for the upload!
Lord Nick with all of the tricks... Excellent specimen of the human species... Warmest regards kick back relax and smoke a cigar... Love your silly humor and your dashing good looks... Thanks for your endeavors... I could watch you forever...🙃🌟💛🌟
The first one would make a brilliant chopping board it the resin covered everything and would become a piece of art in your kitchen when not in use. Endless possibilities for design. I like your take on the glasses more and I am in fact going to make some, so thanks for that idea.
I definitely love the wine glass idea, especially your concept. I wish I would've seen this before I got married because I think it would be a cool idea to do with your wedding colors for your wedding party(bridesmaids and groomsmen during the dinner) and stuff.
The wine glass one is cool. I think it would have been cool in the original version to have the bottom of the glass filled in too. But the picture one and the flower ones were so AMAZING... My favorites for sure. Love watching your videos because you make me smile and laugh. Much love from Tampa Florida
Hey Nick! Loved this series, it can bring out so many new ideas and inspirations. Keep the creativity coming with more awesome "funkadelic" projects. Big ((Hugs)) from Texas!🤗😜
Lord Zammeti, I absolutely love the three glasses set you did with the resin on the underside of the glass base in this resin tiktok re-creation test, I would definitely love to see a set of 4 with red and gold glitter ones . All of the tested ones turned out great, keep up exploring new variations to add to your skill set.❤🧡👍
My daughter and I watch your videos. We really enjoyed this one and hope to see you do more review videos. Thank you for the content and entertainment.
Watching this today proves how much we still need you to create videos on TH-cam! Loved this and hope to see more like it. P. S. I preferred your version for the glasses!
You did a great job on most of those. Flowers in resin can be hard. After a year of trial-and-error, I think I've caught on. I liked this video a lot! You should do more! I like that you've named the artists so others can check them out.
After a night of work ,to watching you doing this funky mini projects ... just makes my morning. I love the first one the most. A great wall decoration. Keep going doing these recreated arts . So awesome !
Love the flowers! The pyramid was still cool! You didn't quite have the charger cord far enough in the resin, it's to keep it from bending and breaking... LOVED your version of the wine glass! The picture stand 👍
This was a really fun video. I love that you put your own spin on each project. Can we look forward to some of your own viral TikTok videos? I love your sense of humour and willingness to experiment. Thank you for the greta video. Cheers
@@Gingin7321 straight. Water will mess up your resin. That why I use the 99% or 100% I spray a little first on the mold, then a little after pouring the resin.
Fun video Nick! I like the flower w/wood, the wine glasses and the picture of you in resin! I might even try to wine glasses...but resin is one craft I haven't thrown myself into because I dabble in so many I don't have room for any more! Thanks for the joy and pretty stuff!
This has been a super fun video to watch! I think they all turned out well. I really like the picture you did. The wine glasses you did turned out fabulous! I like them better than the others. && the wood and flower 'picture' is amazing! I'd buy it in a heart beat. It's beautiful! Great job, Nick!!! ♥️♥️
Personally I like your wine glasses better. The mold used looked like it was spillage, but when you did your picture the shape looked great. Nice job Nick! Hope you get 10.2 mil on this.
I just love your silly, creative content! The Simpsons that you throw in there sneakily at the "buts" just Crack me up! Great work lord Zammetti, keep it comin!
You do amazing work. Love your art and your quips!!! I agree, your potpourri bowl should have millions of hits . Ive shared your videos and your youtube site on my facebook! Keep up the good program you have.
Your version of the wine glasses is so much better! More subtle and easier to hold. Love to see more viral remakes!
Honestly I prefer your idea for wine glasses. The bigger base would be a mess to try and clean, but your idea would be so much easier!
the only problem I have with Nick's idea is that it does basically the opposite of what the tik-tok idea is supposed to do- it makes the wine glasses more likely to be tipped over (and also I doubt I could get that flat enough so they don't wobble)
@@contra1124 the added weight might actually make it harder to tip over, even if it's the same sized base. Yeah, getting it level could be hard, but the resin would also self level
I actually prefer your wine glass design bc the others feel like they'd be hard to store
I actually prefer your version of the wine glasses. And with Christmas just around the corner I'm going to try to make a set too look like wreaths! Awesome video as always
Ditto, his version of wine glass looks better and looks less awkward to use and not accident knock into things
I was just going to say the same thing. Totally better
I agree with you all. The glasses don't take up extra space and they look good. Theming would be easy. The wreath theme sounds great.
I agree, I like both but I prefer the cleaner lines of Nick's, especially if you want to use them at tables with meals...and then there is storage.
I love the glasses too, very individual.
I love the first one with the dried flowers and yes it would make a fine wall art. And the wine glasses are a great idea, I've never seen anything out there like that.
I can't tell you how happy I am to see you branching out and having more fun with resin and trying more funky ideas!!!
Looking forward to you taking those ideas and mixing them in with your woodturing and creating your own NEW TREDNING RESIN ARTWORK PIECES!!
BLESSINGS AND LOVE TO YOU AND YOUR FAMILY 🤗🙏🏻💜✨🕊️
Thanks so much!
Everything turned out amazing. I love how you took the ideas and made them yours. Plus you gave a big shout out to each of the makers that gave you inspiration. It's really cool that you branched out into new things. Crafters or makers should never be in competition with each other but should always inspire each other to try new things and encourage themselves and others to create. Thank you as always for sharing, inspiring, creating and mentoring all in crafting expression.
You're such a joy to watch. Loved all your takes, and the championing of the original artists as well.
Keep Calm and Waffle On.
I absolutely love your version of the stemware resin bottom. Its less in your face a bit more subtle and way easier to clean. Great job.
I think the point of the paw on the charger cable is to protect the area where the cable meets the connector, since that is usually where these things break. If you cover this up in a big chunk of resin, your charger cable might last longer. The way you did it, it's purely decorative, which is obviously still fine.
I was thinking the same thing, if he would have known to do so all he would've had to do to correct that would've been to pull the charger back through that hole to where at least half the housing of the contact part is sticking out of the mold and then it would be both functional and decorative
Doesn't it just introduce more a new place to break, but just lower down?
@@hefoxed to be 100% honest I don't know that, but my guess would be no, just for the fact that the wires are compressed pretty well along the length of the cord itself, but the main part that fails in question would be where the housing of the port contact and wire meet can be a weak point simply because it's 2 different pieces being joined together and tend to want to separate over time due wear and tear as it's being used, as for the wire it self is rather flexible and is one continuous molded rubber piece way less prone to wear and tear.
I think it's just for apple users. We, the Samsung gang, don't have that issue! Lol 😆
It would definitely just introduce a new stress point so I think this might be an accessibility thing! Make it easier for people with diminished dexterity to handle the cord! So still a great idea
I love that you tried these TicToc's and put your own spin on them.
Hi Nick, the lightning cable needed to be further back to stiffen it so as to prevent the flexible part from pulling out of the connector. It's a common fault with them. By using the paw, you pull on the connector and not the cable so it will last longer.
That flower and wood one is absolutely beautiful! And love the photo one! What fun! 😃 it was so fun to watch you try new things 😃
I enjoyed your version of the pyramid. The bubbles on the rose could be interpreted as some sort of underwater geyser with a flower in the middle of it. Actually that might be a good idea to explore and I think that might turn funky!
I’m glad you’ve done this Nick as I’ll watch you do them.
As for TikTok I’ve never had it, nor will ever have it.
The first project is great! Instead of so much dried flowers, less is more. Love the wine glass ideas.
I'm going thru my kitchen cupboards looking for stuff I can resin - I have lots of charms and trinkets and small shells and small starfish, ribbons, buttons....all kinds of inspirational stuff. Thanks Nick. Can't wait till morning.
Thanks for the cute project you just did. I was hoping you would use enough resin to completely cover the flowers to make either a cutting board or serving tray.
All the Tic Tok projects were cool!
Thank you Lord Zammeti!
Resin isn't food safe!
Actually the right resin properly cured is food safe since once hardened it is essentially chemically dormant probably safer Actually then many plastics
@@KaivalaJenva I don't know if that's the case for cutting boards though. It might be fine, but I would be worried about little pieces of it getting in the food from the knife work. For a serving tray, a table, or kitchen counters, it's absolutely fine in my opinion.
This was fun. I'd like to see more episodes like this (even if they fail spectacularly). It's a good time watching you try new stuff. Thanks for the upload!
Loved it, take the concepts and put your best spin on it. 😂😂😂
You should drill out bottom of pyramid and make led lamp out of it. I think it would look really good with the bubbles almost like water
Another great video for me and my 7yr old daughter to watch before bedtime! We're big fans! Thanks Nick!
Brilliance just Brilliance. Love that pyramid best...
Lord Nick with all of the tricks... Excellent specimen of the human species... Warmest regards kick back relax and smoke a cigar...
Love your silly humor and your dashing good looks... Thanks for your endeavors...
I could watch you forever...🙃🌟💛🌟
Yes, miLord! I enjoid it! That was fun! Lets do it again
Great idea for personal coasters, and party glasses, for any theme you can come up with 🎉
I absolutely NEED the self portrait one!!
All great ideas. To remove air bubbles is the best idea, but each project is so neat. Easy to follow & duplicate.
The last one would make great table numbers for weddings 😃
That flower one you did first would make an awesome little side table 💞
The first one would make a brilliant chopping board it the resin covered everything and would become a piece of art in your kitchen when not in use. Endless possibilities for design.
I like your take on the glasses more and I am in fact going to make some, so thanks for that idea.
I definitely love the wine glass idea, especially your concept. I wish I would've seen this before I got married because I think it would be a cool idea to do with your wedding colors for your wedding party(bridesmaids and groomsmen during the dinner) and stuff.
Yum the first piece is beautifully lush, well done👏🏻👏🏻 love that
Of all the ones you did, I liked your wine glasses the best! Great concept
The wine glass one is cool. I think it would have been cool in the original version to have the bottom of the glass filled in too. But the picture one and the flower ones were so AMAZING... My favorites for sure. Love watching your videos because you make me smile and laugh. Much love from Tampa Florida
Hey Nick! Loved this series, it can bring out so many new ideas and inspirations. Keep the creativity coming with more awesome "funkadelic" projects. Big ((Hugs)) from Texas!🤗😜
Do more Nick!! I love when you put your spin on it.
The last project was my favorite! Love the picture!! 💙
Love how inspired you are and making a concept your own!
I really like all of your versions, especially the Wine Glasses!
The wine glass ones were so pretty! I really liked your take on them too! Kinda like islands in a tropical paradise!
The glasses are amazing, and the portrait is even better that the original, imo.
Yes yours are much better concept. Rewatching your videos in support!
Lord Zammeti, I absolutely love the three glasses set you did with the resin on the underside of the glass base in this resin tiktok re-creation test, I would definitely love to see a set of 4 with red and gold glitter ones . All of the tested ones turned out great, keep up exploring new variations to add to your skill set.❤🧡👍
My daughter and I watch your videos. We really enjoyed this one and hope to see you do more review videos. Thank you for the content and entertainment.
Watching this today proves how much we still need you to create videos on TH-cam! Loved this and hope to see more like it. P. S. I preferred your version for the glasses!
fun video! My favorite was the wood with dried flowers- so beautiful
You did a great job on most of those. Flowers in resin can be hard. After a year of trial-and-error, I think I've caught on. I liked this video a lot! You should do more! I like that you've named the artists so others can check them out.
I love your version of the wineglass decoration. Really pretty.
Love the wine glasses the way you did them!
The first and last projects are my favorite. I was amazed at how much of a difference the pieces of wood made with the flowers.
After a night of work ,to watching you doing this funky mini projects ... just makes my morning. I love the first one the most. A great wall decoration. Keep going doing these recreated arts . So awesome !
I love adding photos to wood projects with resin. I have done it quite a few times.
Love the flowers!
The pyramid was still cool!
You didn't quite have the charger cord far enough in the resin, it's to keep it from bending and breaking...
LOVED your version of the wine glass!
The picture stand 👍
These are some good ideas, the wine glass one would have to be my favourite 🍷 your version looks great, and more practical too I think
Thanks so much! 😊
I love the concept behind this vidio. It's so cool that you are showing some of the creators out there.
I loved this little shake up!
This was a really fun video. I love that you put your own spin on each project. Can we look forward to some of your own viral TikTok videos? I love your sense of humour and willingness to experiment. Thank you for the greta video. Cheers
The first one and your wine glasses are my favorite!!
I love it when a channel I know (Nick's) references another channel I know (John's). Great community!
some great projects. i love how youre not afraid to try new things.
I've been using 99% Isopropyl Alcohol to remove bubbles in my resin. Bit cheaper than Denature Alcohol. Also, I like your picture more.
Do you mix it with water or just use it straight?
@@Gingin7321 straight. Water will mess up your resin. That why I use the 99% or 100% I spray a little first on the mold, then a little after pouring the resin.
@@tomclevenger5668 thanks 😊
I much prefer to use the Iso as well
Fun video Nick! I like the flower w/wood, the wine glasses and the picture of you in resin! I might even try to wine glasses...but resin is one craft I haven't thrown myself into because I dabble in so many I don't have room for any more! Thanks for the joy and pretty stuff!
I love this concept for a video! The wine glasses look great!
I like the fact that your display in the background is all filled out compared to when I started watching your videos several years ago.
Wow! Good job Nick. Thanks for what you do and for sharing it with us.
This has been a super fun video to watch! I think they all turned out well. I really like the picture you did. The wine glasses you did turned out fabulous! I like them better than the others. && the wood and flower 'picture' is amazing! I'd buy it in a heart beat. It's beautiful! Great job, Nick!!! ♥️♥️
I love the wine glasses, heck everything was really cool.
awesome job, I especially like the dried flowers with the wood one.
I want emerald green and gold wine glass from your design! Love it!!
They all turned out great!!
Great episode Nick!! Keep em coming 🥳
That last one would make a great Christmas tree ornament!!! 😀
Woke up too late to watch this morning, but can’t wait to watch tonight. Loving the increase in content lately!
This was a fun video. Thanks, Nick, for offsetting the impending winter blues.
I like your idea with the wine glasses better than the other one!
The misty look of the pyramid with a spikey piece of wood would of looked like mountains would of been cool
That was a brilliant video nick. Loved it. Thank you. Some good ideas.
Fun video! I like the picture frame idea at the end. That would be a good mass Xmas gift idea!
I like the glasses you made, but my favorite was the 1st one.
a joy to watch as all ways Nick. x
Love the way you did these.
I love that you did something a little bit differently. I love your picture idea!
Definitely do more of these!
Personally I like your wine glasses better. The mold used looked like it was spillage, but when you did your picture the shape looked great. Nice job Nick! Hope you get 10.2 mil on this.
That first project, with another later of clear resin over it all to provide a flat surface, would make a great top for a bedstand table.
Your creations are pretty cool Nick, the pictures you could give away a prizes, most followers would love one, well I would for sure
Cool ideas! Have fun doing your resin, wood and other mediums!
Love all of them.
Awesome series 👍🏾👍🏾
You sir…… have made my dreary morning a little bit brighter….. thanks for posting today, I needed it lol…. Always Awesome
Glad you enjoyed it🎉
I liked your wine glasses better Nick.
Much love to all ❤️
Stay safe everyone 🤘😎
Nick, you are extremely talented!
Love the video as always. Cool ideas to try.
I just love your silly, creative content! The Simpsons that you throw in there sneakily at the "buts" just Crack me up! Great work lord Zammetti, keep it comin!
The rose needed that first resin cover you skipped, to prevent those bubbles Nick.
Loved your version of all these art pieces!
You do amazing work. Love your art and your quips!!! I agree, your potpourri bowl should have millions of hits . Ive shared your videos and your youtube site on my facebook! Keep up the good program you have.
This was such a fun video, mostly because I love your spin on each one.
Wow! Thanks for expanding my horizons!!
Thanks to the people who suggested this idea. Love Nick's funkadelic versions