Hi Dear 1.Switch off the machine and unplug it from the power source. 2. Gently pull out any fabric and threads from the machine. 3.Look for any blockages, such as tangled threads, fabric scraps, or debris, that might be causing the issue. 4.Use a small brush, tweezers, or a sewing machine cleaning brush to remove any debris, dust, or lint. 5.Ensure the bobbin is properly seated and not clogged with threads. 6. Ensure the tension dials are not too tight or too loose. 7.Rotate the handwheel manually to see if the machine will move. 8. Plug the machine back in and test it. If none of these steps resolve the issue, consider: - Consulting the user manual for specific troubleshooting guides - Contacting Brother's customer support - Visiting an authorized Brother service center for professional assistance. Thanks 😊
Good morning.Maam, tanong lang po. ang machine po pag mag start n ako for sawing hindi po siya mag running kung hindi mo hahatakin. Ano ang dapat gawin kc loosen stitch niya
Hi Dear When sewing, fabric doesn't run (or move smoothly) if you don't pull it because of the way sewing machines are designed. Here's why: 1. *Feed dogs*: Sewing machines have feed dogs, which are teeth-like mechanisms that grip and move the fabric forward as you sew. However, they only work effectively when the fabric is being pulled gently. 2. *Friction*: Fabric has natural friction, which can cause it to resist moving smoothly under the needle. If you don't pull the fabric, this friction can cause the fabric to bunch up or drag. 3. *Tension*: Sewing machines have tension discs that help control the thread's tension. If the fabric isn't being pulled, the tension can become uneven, causing the fabric to pucker or distort. By gently pulling the fabric as you sew, you: - Help the feed dogs grip the fabric more effectively - Reduce friction and prevent bunching - Maintain even tension for smooth stitching Remember to pull the fabric gently, as excessive force can cause distortion or damage to the fabric or machine. Thanks 😊
Hi There is a Presser foot kit for Brother GS3700. Which comes with Multiple Foot's. Yes a generic Ruffler foot can work on this machine. However you will have to make sure to find the correct one that fits on the shank. It is advised that the Brother ruffler foot are used by the F420 Machine. Thank you.
@ sarun baniya : Hi mujhe ye machine special price me mili South African R 2750.00 . Ye mid range machine hai, ye daily home use k liye best hai. Shop k liye industrial/heavy duty machine behtar hongi. GS3700 Denim bhi sew Kar Sakti h par Denim ya heavy duty k Liye industrial model behtar option hai. Thanks.
Can u plz tell me how i can fix the wire for threading ... The wire inside the machine where the number 2 is written ..my thread doesn't go freely inside the looped wire.. Plz tell me how to fix it..
Hi MOMINA KHAN, There can be a number of reasons . However here's some basic idea's of the common problems that can cause this. 1) Most common is a thread can be stuck inside . Please check and remove if this Is the issue. 2) There can be knots or small tangles in the thread. 3) Make sure the tension is correct. 4) Check the spool is moving freely. 5) Check needle is fine, it can also cause the thread not to move freely Hope this helps and your machine gets sorted.
Hi Dear *Stuck Stitch:* 1. Stop the machine immediately. 2. Remove the fabric. 3. Remove any tangled thread. 4. Re-thread the machine. 5. Adjust tension. *Machine Gets Stuck:* 1. Turn off and unplug the machine. 2. Check for blockages. 3. _Remove any blockages. 4. Consult the user manual. 6. _Contact Brother support. Additional tips: - Regularly clean and maintain your machine to prevent issues. - Use the correct needle and thread for your fabric type. - Avoid sewing over pins or thick seams. - Keep the machine's bobbin area clean and free of debris. Thanks 😊
The G.W (with the box and accessories) is 7.4kg and the machine alone is 5.61kg (without accessories) according to my personal scale.I bought it instore. Please subscribe much appreciated Thanks.
Hi Dear _Needle Breaking:_ 1. Incorrect needle size. 2. Dull or damaged needle. 3. Incorrect thread tension. 4. Fabric thickness. _Feed Dog Not Moving:_ 1. Ensure the feed dog lever is in the "up" position. 2. Clean the feed dog teeth and surrounding area. 3. Contact Brother support or a professional for replacement. 4. Ensure you're using the correct presser foot for your fabric type. Thanks 😊
Effective tutorial. Easy to follow.
Brillant, my 1st ever sewing machine and managed to thread it in 10mns! Thank you!
Iam glad dear keep it up 😊
SAME.JUST GOT ONE
Woow dear congrats 👏
Thank you so much. This was so helpful.
It was helpful. Thank you😊😊😊😊😊😊😊😊😊
Pleasure my dear
Thanks for this, the user guide I just cannot understand 😂
Iam glad to get your feedback
This is like the best tutorial every thank you
Glad to hear. Thank you. Appreciate the feedback
Tif cara abras kk ditmpil dipola mna yg cocok
Piko karna bataiye
I have #gs2700 thanks for sharing
Thank you, Much appreciated.
very nice and detailed plus point is video is not in hurry.
Thank you so much for helping me
You are most welcome dear 😊
Thanks a lot for this
Best
Very nice n clear 👍
Silk cloth can be stitched on this gs 3700 brother
Hi Dear
Yes you can stitch silk too but choose the right needle, thread as well as length and width .
Thanks 😊
How long takes to thread cotton?
Hi It can take + - 30 seconds but depends on individual practice and or skill level.
Good evening sir how to fix brothers stock up
Hi Dear
1.Switch off the machine and unplug it from the power source.
2. Gently pull out any fabric and threads from the machine.
3.Look for any blockages, such as tangled threads, fabric scraps, or debris, that might be causing the issue.
4.Use a small brush, tweezers, or a sewing machine cleaning brush to remove any debris, dust, or lint.
5.Ensure the bobbin is properly seated and not clogged with threads.
6. Ensure the tension dials are not too tight or too loose.
7.Rotate the handwheel manually to see if the machine will move.
8. Plug the machine back in and test it.
If none of these steps resolve the issue, consider:
- Consulting the user manual for specific troubleshooting guides
- Contacting Brother's customer support
- Visiting an authorized Brother service center for professional assistance.
Thanks 😊
Good morning.Maam, tanong lang po. ang machine po pag mag start n ako for sawing hindi po siya mag running kung hindi mo hahatakin. Ano ang dapat gawin kc loosen stitch niya
Hi Dear
When sewing, fabric doesn't run (or move smoothly) if you don't pull it because of the way sewing machines are designed. Here's why:
1. *Feed dogs*: Sewing machines have feed dogs, which are teeth-like mechanisms that grip and move the fabric forward as you sew. However, they only work effectively when the fabric is being pulled gently.
2. *Friction*: Fabric has natural friction, which can cause it to resist moving smoothly under the needle. If you don't pull the fabric, this friction can cause the fabric to bunch up or drag.
3. *Tension*: Sewing machines have tension discs that help control the thread's tension. If the fabric isn't being pulled, the tension can become uneven, causing the fabric to pucker or distort.
By gently pulling the fabric as you sew, you:
- Help the feed dogs grip the fabric more effectively
- Reduce friction and prevent bunching
- Maintain even tension for smooth stitching
Remember to pull the fabric gently, as excessive force can cause distortion or damage to the fabric or machine.
Thanks 😊
Can we use ruffler foot in this model
Hi
There is a Presser foot kit for Brother GS3700. Which comes with Multiple Foot's.
Yes a generic Ruffler foot can work on this machine. However you will have to make sure to find the correct one that fits on the shank.
It is advised that the Brother ruffler foot are used by the F420 Machine.
Thank you.
what is the SPM SEWING speed of this machine
Hi there, Maximum sewing speed is up to 800 SPM. Thanks
@@bibastream6157 company says its 850 stich per minute ...? is it 800 😮 can you check with the manual
@@Baby_yarn Iam not sure where you got information from but the information I have is 800 SPM maximum.Thanks
Iska Kitna price hai aaur ye kita useful hai bataie Mai Kya Apne shop ke lie ye use kar sakte hoon ?
@ sarun baniya : Hi mujhe ye machine special price me mili South African R 2750.00 .
Ye mid range machine hai, ye daily home use k liye best hai.
Shop k liye industrial/heavy duty machine behtar hongi.
GS3700 Denim bhi sew Kar Sakti h par Denim ya heavy duty k Liye industrial model behtar option hai.
Thanks.
Can u plz tell me how i can fix the wire for threading ... The wire inside the machine where the number 2 is written ..my thread doesn't go freely inside the looped wire.. Plz tell me how to fix it..
Hi MOMINA KHAN,
There can be a number of reasons . However here's some basic idea's of the common problems that can cause this.
1) Most common is a thread can be stuck inside . Please check and remove if this Is the issue.
2) There can be knots or small tangles in the thread.
3) Make sure the tension is correct.
4) Check the spool is moving freely.
5) Check needle is fine, it can also cause the thread not to move freely
Hope this helps and your machine gets sorted.
खराब होने पर कैसे बनेगा स्टिच फस जाने पर मशीन को हम कैसे
Hi Dear
*Stuck Stitch:*
1. Stop the machine immediately.
2. Remove the fabric.
3. Remove any tangled thread.
4. Re-thread the machine.
5. Adjust tension.
*Machine Gets Stuck:*
1. Turn off and unplug the machine.
2. Check for blockages.
3. _Remove any blockages.
4. Consult the user manual.
6. _Contact Brother support.
Additional tips:
- Regularly clean and maintain your machine to prevent issues.
- Use the correct needle and thread for your fabric type.
- Avoid sewing over pins or thick seams.
- Keep the machine's bobbin area clean and free of debris.
Thanks 😊
Overlocking ke adjust mention malum karne he in this model
Hi Dear
Please watch this video the link is below...
th-cam.com/video/vIPit-ZHrjY/w-d-xo.html
Thanks 😊
what will the weight of this machine be and did you purchase online or offline
The G.W (with the box and accessories) is 7.4kg and the machine alone is 5.61kg (without accessories) according to my personal scale.I bought it instore.
Please subscribe much appreciated Thanks.
Needle ka jo tham hel Raha jis se needle toot jati eska dog foot cloth nahi chal Raha
Hi Dear
_Needle Breaking:_
1. Incorrect needle size.
2. Dull or damaged needle.
3. Incorrect thread tension.
4. Fabric thickness.
_Feed Dog Not Moving:_
1. Ensure the feed dog lever is in the "up" position.
2. Clean the feed dog teeth and surrounding area.
3. Contact Brother support or a professional for replacement.
4. Ensure you're using the correct presser foot for your fabric type.
Thanks 😊