Thank you so much! I just got a new carbon frame bike after riding my last bike for 20-years. I had a computer on it but it was wired. I appreciate your tutorial so much, because I could not get through my head how the sensor was attached on just one size; even though that's how the instructions looked. Thanks again, this was great and just what I needed. Ciao!
Hi, me and my Nan were stuck in this for over an hour, then we came to your video and it helped so much! Now everything works fine thanks!! ❤ Definitely earned a new sub! ❤
Thanks dude I got trouble with the transmitter and the magnet part but when you skimmed the magnet near the transmitter, that’s where I made a mistake so thank you so much man :)
How do you know where on the wheel to place the reader. The tire moves faster near the rim as opposed to near the hub (inner tire). Wouldn't there be different distances and speed based on where it is on the spoke/fork?
@@garydamiter7065 Does the diameter of the wheel affect the mileage though? One revolution of a 20" wheel doesn't cover as much distance as a 26". The 26" obviously has a larger circumference. Those +/- inches each revolution would make for different readings, yes?
Hi! I buy one, is not the same brand as yours but is almost identical but whit no green light. How do you turn it of?? O is like a clock thart always well be on?
Does the magnet and the sensor have to be up that high? I set my magnet closer to center, where the spokes start crossing. I aligned the sensor with it. Yours is up higher, should I move mine up?
Would these work on a motorbike? I have a 50cc Yamaha Jog R and don’t know how to wire an actual speedo, would I just need to figure out the circumference of my wheel, set it up, and then glue the magnet to the hub of my wheel?
When I got mine I installed it on a 26 inch bike but I just switched everything over to a new 29 inch bike but because I'm a guy I threw away the papers so if you have yours can you tell me what numbers to enter for 29x2.25
I am not able to put the sensor on the front wheel so I tried to put it on the back wheel, but it doesn’t work… I think it is because it is not horizontal?
I just got mine but it failed the reading test. I assume both the computer and the sensor are paired by default right? I can't find nothing in the instructions :/
If your fork width is too wide you'll have too much distance between the sensor and the magnet. The fix for me was to forget the zip ties and just tape the sensor to the inside of the fork with vinyl electrical tape.
I'm not sure if you're able to answer this question but I thought I would throw it at you anyway. About to buy computers and neither one of them are registering so I know there's something I'm doing wrong. Where are we replacing the original battery and why do they send a second battery? Either way, I replaced the battery and still no positive results. Thank you
If you want to know how to use and program it then look here: th-cam.com/video/G5GHyhu6-K4/w-d-xo.html
First one I bought came without instructions. Your videos on programing and installing it saved the day. Thank you
Thank you so much! I just got a new carbon frame bike after riding my last bike for 20-years. I had a computer on it but it was wired. I appreciate your tutorial so much, because I could not get through my head how the sensor was attached on just one size; even though that's how the instructions looked. Thanks again, this was great and just what I needed. Ciao!
Hi, me and my Nan were stuck in this for over an hour, then we came to your video and it helped so much! Now everything works fine thanks!! ❤ Definitely earned a new sub! ❤
Great Video! So helpful as the directions that came with the computer were not very clear. Thank you!
Hello from France 🇫🇷
Thanks for this video 😊
This video was super helpful! the instructions were difficult to understand. Thank you!
Just bought this. Gonna be a lot easier to install now after watching you install yours. Thanks for sharing 👍🏻.
Thanks dude I got trouble with the transmitter and the magnet part but when you skimmed the magnet near the transmitter, that’s where I made a mistake so thank you so much man :)
How do you know where on the wheel to place the reader. The tire moves faster near the rim as opposed to near the hub (inner tire). Wouldn't there be different distances and speed based on where it is on the spoke/fork?
Counts tire revolutions....1 revolution is 1 revolution. Placement won't have an impact
@@garydamiter7065 Does the diameter of the wheel affect the mileage though? One revolution of a 20" wheel doesn't cover as much distance as a 26". The 26" obviously has a larger circumference. Those +/- inches each revolution would make for different readings, yes?
@@cano21 You enter your wheel circumference when you set up the odometer.
Great info, thanks.
thx bro
i have a trainer .... can you use this computer for the rear wheel as well?
Hi! I buy one, is not the same brand as yours but is almost identical but whit no green light. How do you turn it of?? O is like a clock thart always well be on?
Does the magnet and the sensor have to be up that high? I set my magnet closer to center, where the spokes start crossing. I aligned the sensor with it. Yours is up higher, should I move mine up?
Excellent explanation. Thanks!
Would these work on a motorbike? I have a 50cc Yamaha Jog R and don’t know how to wire an actual speedo, would I just need to figure out the circumference of my wheel, set it up, and then glue the magnet to the hub of my wheel?
I appreciate your tutorial very much
Thanks 😊 you a lot
thank you so much couldent figure out how to put it on!
Nice gadget for a bike👍
THANKS!
Great content, was very helpful with my installation.
Nice info as always.👍
Thanks bro
Thanks !!
Brilliant, TY!
When I got mine I installed it on a 26 inch bike but I just switched everything over to a new 29 inch bike but because I'm a guy I threw away the papers so if you have yours can you tell me what numbers to enter for 29x2.25
Thank you, very helpful.
Great explanation. Thanks and Subscribed!
Hola desde Chile enque momento se apaga
5 minutos más o menos
THANK YOU
I would definitely slip some inner tube under thay sensor so it has 0 chance of slipping into the spokes
I am not able to put the sensor on the front wheel so I tried to put it on the back wheel, but it doesn’t work… I think it is because it is not horizontal?
Gadget information pls
Woww niceee
I just got mine but it failed the reading test. I assume both the computer and the sensor are paired by default right? I can't find nothing in the instructions :/
I'm having the same problem, were you able to figure out what the reason was for and not register the speedometer reading?
If your fork width is too wide you'll have too much distance between the sensor and the magnet. The fix for me was to forget the zip ties and just tape the sensor to the inside of the fork with vinyl electrical tape.
Ye, i have this problem and trying to find some solution that doesnt look bad
I have one to but the magnet doesn’t open like yours
"And I have it loose, cuz I don't have it tight yet". 🤔 wtf😆. That would be the definition of loose!🤣
Boom bastic!!
I saw this on your bike on insta
Great info
Yes a good video. However the one I have has zip ties that do not ZIP!
Your zip ties are backwards
I'm not sure if you're able to answer this question but I thought I would throw it at you anyway. About to buy computers and neither one of them are registering so I know there's something I'm doing wrong. Where are we replacing the original battery and why do they send a second battery? Either way, I replaced the battery and still no positive results. Thank you
There is a battery in the display unit AND in the transmitter you place on the spokes.
wat about when u jump lol
Not sure if anglosaxons know what 3mm is ?
Or kilometers lol.
Mine doesn't read, so it's completely useless.
Get what you pay for. This is for
Indoor bike trainer. So just may have to wing it. Don’t have time to waste.
I use it only for outdoors riding 20-80 miles a day. I have over 5000 miles since I got this.
My magnet does not work, when I put magnet near sensor. No reading on digital display.
Bro thanks these directions are trash
Thank you
Thank you.