really impressive - bet it was nerve racking to cut out for registers and doors...I'm just about to try your clips and wedges - on 6 x 36 tile installed diagonally - really glad I came across your invention!!
I can't believe you guys did that. that is a legendary. Would you be able to tell me the brand and name of tools used such as tile cutting blade, work bench, suction and steel bars etc. thanks
Super. Czy podłoga jest z playwoodu czy wylewka betonowa? Czy można odkleić wrazie czego taką dużą płytkę? A grzebień ma nieduży ząb czyli wszystko idealnie płaskie nie boicie się głuchych miejsc? Pozdrawiam
Thank you for your comment. Please watch that video similar installation cuts of the tiles 3'xx10' or 100x300cm is there th-cam.com/video/4I8u_DUYMX8/w-d-xo.html
بہت زبردست ۔مجھے آپ لوگوں کا کام کرنے کا طریقہ بہت اچھا لگا۔میں بھی ٹائل فکسر ہوں۔پاکستان سے۔اگر مجھے کوئی ٹولز چاہئے ہو تو۔انکے پرائس ضرور بتائے۔کیونکہ مجھے بھی 5'×10' کی ٹائل لگانی ھے۔شکریہ
so im confused ,,im guessing you have to pre level the floor before installation,,especially with such large slabs,but depending on how much you need to lift to make flush wont you have a void,,
Bill Hamilton interesting point, Bill. This is called GPT. or guaged porcelain tile. My union gives seminars on this type of tiling. These guys are actually installing it incorrectly. The wedge leveling system is actually just to lock the tile in place. You are supposed to comb the thinset the short ways on the floor and the tile. This tile can also be set on walls as well. I have done a few installs, but this tile is not cost effective. Not yet anyway.
There lies the rub Bill the skill level is in the floor preparation, ie the flattening of the floor slab, but they don’t go there because of the effort involved. Imagine the what problems a small bump would cause especially going from room to room🤔
Great job What is the size of the spacer? and what type of grout filler did you use for this job? and I heard that the porcelain must be installed without any space between the tiles is that true? and is it OK?
Tile spacer is 2 mm ~ 1/16" with epoxy grout. You have to have grout joint ...otherwise tiles were crack because expansion and shrinkage "due to temperature change (Summer/winter) " Believe it or not porcelain tiles shrink and expands to
Why is it when I kick out the plastics / wedges sometimes a tiny piece of the clear plastic remains stuck in the grout line? This proves then a nightmare to remove.
Yes you can... and is recommended on larger tiles please watch that video for more information th-cam.com/video/sMjZAYlHvks/w-d-xo.html by walking on the fresh tiles you can achieve 100% bonding. You could do that only with T-Lock Tile Leveling System
Fajny efekt i super wykonanie. Nie jestem jednak wielkim zwolennikiem tych plastikowych łączników. mam wrażenie, że one podnoszą nieco płytę, odrywając ją od kleju..
Martin te plastykowe łączniki "Klipy i Kliny" (clips - wedges) z firmy www.perfectlevelmaster.com są zaprojektowane po to aby tylko utrzymać dwie płyty/płytki na tej samej wysokości do momentu wyschnięcia kleju. Każdy klej ma swoją elastyczność do 45 minut i na tyle te kliny i klipy są potrzebne by stworzyć perfekcyjną powierzchnie.T-LOCK pod taką nazwą jest rozpoznawany w internecie i sprzedaży służy tylko do szybkiej poprawy od 1-3 mm różnicy w wysokości pomiędzy płytkami.Generalne zasady przygotowania powierzchni po płytki nadal obowiązują na długości 3m.... różnica na podłodze nie może być większa ja 6 mm tak jest w Kanadzie i USA i chyba wszędzie na świecie
Nie... nie wystaje tak jest zaprojektowany Klip by oderwal sie pod plytka. Jesli zrobesz subskrybcje kanalu Polmaster to zobaczysz wiecej informaci jak ukladac pltki zgodnie z najnowsza technika i materialami. Przyjemnago ogladania...dzieki
I will be installing 3000 m2 of tiles, that size, but it's walls outside a house, and it's neolith, touch and break, very difficult material to work with.
Grout joints is only 1mm or 1/32" very small ...in this kitchen there is only six tiles book much. Vein is going from one tile to the other 4 tiles as one Picture. Grout was chosen perfectly as the color of the tile and vein on the tile. They do come with the design from manufacture. We do have more videos installation with this kind of tile. Please subscribe to see more every week
Thank you ...purpose of this video and many more is to show new techniques/tools (tile leveling system) necessary for larger formant "Thin Porcelain Tile" installation 1/4" or 6mm thick.
WHY, because they can I guess,, largest area I ever installed was 500 sq ft of mixed 12 x 18 and 18 x 18 with 12 x 12 porc, tiles mixed to break up the grout lines,,, can't not imagine doing that myself alone again,, back butter and backer board
this handling system in nowadays obsolete. Yes, it works on polished tiles with when you have textured tiles it does't work at all. In addition it is too weak and it moves a lot putting the slab under a huge tension increasing the risk to break the tile. Since 2015 these kind of tools evolved a lot. Rubi, Raimondi and especially Montolit have developed advanced solutions that allows you to reduce almost to zero the risk to break the tiles. This video is part of the history now. good for museum guys.
Building Tools lots of criticism from your comment at the end... I decided not to delete your comment because you mention about the company's which they do have today (new frame). One thing you did not mention that video was made 2015 those frame for rough surfaces tiles was not available. I hope next comment from you will be more informative for all the viewers ...please watch what you're saying and do little bit more research before you make public come
I used the same handling system before and I experienced a lot of problems. For this reason I put a lot of criticism on my comment. Sorry for that :). As soon as you have a time you should help the trade posting a new technical video using advanced solutions that are now available. No matter which is the brand to me.
very good?, very good?, maladez. perche non ti fermi un po' con la telecamera sulla fuga per far capire ai clienti futuri del incomprensibile fuga mezzavuota? che è un vero problema
It is very beautiful but it is much more expensive, it needs 4 men to set a stone, it needs special equipment, it even needs a heavy machine to load the stones, I think, stones of a meter and a half are more than enough for one Only person settling why it is not only rich that covers poor floor give more profit.
PeterWCollier regarding combed.We could say "yes" and "no".Depends what you do afterwards.Please check next video and see what's happening when we walk on top of the tiles we have 100% bonding th-cam.com/video/sMjZAYlHvks/w-d-xo.html
Running the comb lengthwise is not the recommended method. "Troweling techniques are critical in creating an even setting bed to insure an adequate and uniform bond coat between gauged porcelain tiles or gauged porcelain tile panels-slabs and substrate.Therefore, it is recommended when troweling gauged porcelain tiles and gauged porcelain tile panels-slabs, with widths greater than 20 inches (0. 5 m), to comb the mortar on the tile from the centre line to the outside edge. Leaving this start/stop point at the centerline of the tile will insure a uniform setting bed of mortar under the tile body and that the edges of the tile are fully supported." BOTH the mortar application techniques along with a specific walking pattern shall be used to eliminate voids in the mortar while maximizing edge to edge coverage for tiles wider than 20 inches (0.5m).
Peter Collier thank you for your comment please watch that video th-cam.com/video/sMjZAYlHvks/w-d-xo.html that's what we do everyday...we walk on the tiles "gravity" is our friend more videos shows exactly what we/you talking about
I did watch the video... that's not what I am primarily concerned with, other than the fact that if you comb the mortar the length of the panel-slab, rather than the recommended width, you will trap air in the combs of the center of the panel-slab, as shown in the ABOVE video.
+Ann Ackerman Thank you for the suggestion This is only for your information that's tiles is special one means is flexible and very hard... definitely beer bottle would not damage this tile
Stupefyingly large tiles, and the lifting frame is marvelous!
A very fine piece of teamwork and craftsmanship.That looks amazing!
really impressive - bet it was nerve racking to cut out for registers and doors...I'm just about to try your clips and wedges - on 6 x 36 tile installed diagonally - really glad I came across your invention!!
+DXWXMX44 Thank you very much for your comment. I would recommend 1mm clips for that size of tiles. It will give you the perfect look.
Beautiful tiles. Good craftsmanship 👍🏼
Impressive, the marble gray veins running through look like it's seamless.
Awesome job guys just awesome. Great job on the layout.
Tim silo thank you for your comment
Great job guys 👏👏👏👏👏
I can't believe you guys did that. that is a legendary.
Would you be able to tell me the brand and name of tools used such as tile cutting blade, work bench, suction and steel bars etc. thanks
That is awesome. Beautiful job.
Comment like yours makes us happy and we would like to share/show even more. Thank you
Super. Czy podłoga jest z playwoodu czy wylewka betonowa? Czy można odkleić wrazie czego taką dużą płytkę? A grzebień ma nieduży ząb czyli wszystko idealnie płaskie nie boicie się głuchych miejsc? Pozdrawiam
Excellent work. Would be good to see the cutting process tho. Especially around the door frames.
Thank you for your comment. Please watch that
video similar installation cuts of the tiles 3'xx10' or 100x300cm is there th-cam.com/video/4I8u_DUYMX8/w-d-xo.html
Great job! I'll be installing similar tiles in my bathroom wall (32x72). What grout, brand and color, did you use? It's nearly impossible to see.
wow this is a very very excellent work and I really like your work very good hundred percent clear and clean work
Frr Frr Thank you for your comment
Hi, nice job. Did you make the aluminium lifting frame yourself?
بہت زبردست ۔مجھے آپ لوگوں کا کام کرنے کا طریقہ بہت اچھا لگا۔میں بھی ٹائل فکسر ہوں۔پاکستان سے۔اگر مجھے کوئی ٹولز چاہئے ہو تو۔انکے پرائس ضرور بتائے۔کیونکہ مجھے بھی 5'×10' کی ٹائل لگانی ھے۔شکریہ
LOVE THOSE TROWELS
Incredible.
so im confused ,,im guessing you have to pre level the floor before installation,,especially with such large slabs,but depending on how much you need to lift to make flush wont you have a void,,
Bill Hamilton interesting point, Bill. This is called GPT. or guaged porcelain tile. My union gives seminars on this type of tiling. These guys are actually installing it incorrectly. The wedge leveling system is actually just to lock the tile in place. You are supposed to comb the thinset the short ways on the floor and the tile. This tile can also be set on walls as well. I have done a few installs, but this tile is not cost effective. Not yet anyway.
There lies the rub Bill the skill level is in the floor preparation, ie the flattening of the floor slab, but they don’t go there because of the effort involved. Imagine the what problems a small bump would cause especially going from room to room🤔
Great job
What is the size of the spacer?
and what type of grout filler did you use for this job?
and I heard that the porcelain must be installed without any space between the tiles is that true? and is it OK?
Tile spacer is 2 mm ~ 1/16" with epoxy grout. You have to have grout joint ...otherwise tiles were crack because expansion and shrinkage "due to temperature change (Summer/winter) " Believe it or not porcelain tiles shrink and expands to
What grout did you use? the finish product no grout lines were seen.
wow!!! Nice job.
That looks so nice
Grant Atkins
Grant Atkins
Meraviglioso 👏👏👏👏namber 1
Why is it when I kick out the plastics / wedges sometimes a tiny piece of the clear plastic remains stuck in the grout line? This proves then a nightmare to remove.
fantastico. parabens aos profissionais
Hi where do i find the handling suction tool?
thank you sir.i already subscribed your channel.with best regards.azmat Hussain from kingdom of Saudi Arabia
Hello, can you find a work of art where I work in the same field
Where can I buy the suction cup device?
what brand is the lifter?
Can you stand on the tiles you just set without moving them? It seems that the leveling plastic holders keep the tile from moving up or down when set?
Yes you can... and is recommended on larger tiles please watch that video for more information th-cam.com/video/sMjZAYlHvks/w-d-xo.html by walking on the fresh tiles you can achieve 100% bonding. You could do that only with T-Lock Tile Leveling System
I am curious how much it costs to install 4 x 8 slabs per square meter?
nieźle sie bawicie SIOSTRY :)
Beautiful floor
where polmaster located ,, i want to hire them
looks like a nice easy beginner project
Beelzebob the innocent wwe
Beelzebob the innocent - contact your local Craigslist discount installer
Beelzebob the innocent grot or silicone
Where could I find the aluminum rail with suction cups or is it something you guys fabricated
What country are you ?
Dallas Texas we have a job coming up identical to this 10 ft by 5 ft luckily open area and that rail looks very helpful.
+Alberto Lira Go to www.europeantilemasters.com thin panel tools
Found it thanks. One last question how much did you guys charge for the installation
Thanks for this Video, will motifation others people......
Nice work lads.
Wow ... Perfect
Great job! 👍
Fajny efekt i super wykonanie. Nie jestem jednak wielkim zwolennikiem tych plastikowych łączników. mam wrażenie, że one podnoszą nieco płytę, odrywając ją od kleju..
Martin te plastykowe łączniki "Klipy i Kliny" (clips - wedges) z firmy www.perfectlevelmaster.com są zaprojektowane po to aby tylko utrzymać dwie płyty/płytki na tej samej wysokości do momentu wyschnięcia kleju. Każdy klej ma swoją elastyczność do 45 minut i na tyle te kliny i klipy są potrzebne by stworzyć perfekcyjną powierzchnie.T-LOCK pod taką nazwą jest rozpoznawany w internecie i sprzedaży służy tylko do szybkiej poprawy od 1-3 mm różnicy w wysokości pomiędzy płytkami.Generalne zasady przygotowania powierzchni po płytki nadal obowiązują na długości 3m.... różnica na podłodze nie może być większa ja 6 mm tak jest w Kanadzie i USA i chyba wszędzie na świecie
Dzięki za wyjaśnienie. A po wyschnięciu i odłamaniu tych klipów, plastik nie wystaje ponad powierzchnię fugi?
Nie... nie wystaje tak jest zaprojektowany Klip by oderwal sie pod plytka.
Jesli zrobesz subskrybcje kanalu Polmaster to zobaczysz wiecej informaci jak ukladac pltki zgodnie z najnowsza technika i materialami. Przyjemnago ogladania...dzieki
Zasubskrybuję, chociaż to kompletnie nie moja branża ;)
Amazing
Very good
nice look! who produce that big tiles? thanks
Granitifiandre
Domo Mark
Super
Ya bizde bu kadar olanak yok sizden daha pratik yapıyoruz ah şans ah kurdis selamlar
I will be installing 3000 m2 of tiles, that size, but it's walls outside a house, and it's neolith, touch and break, very difficult material to work with.
here are you guy's located? i want you guy's to do my floor. how do we get it done?
Bode Tech go to www.polmaster.com
or email info@polmaster.com
Polmaster Construction & Tile Ltd.
great work . Greetings to you from Iraq
Thank you from CANADA 🇨🇦 ابوكرم للسيراميك
Nice job.
HoustonTileWorks thank you
How the joints do not appear? The drawings were made later?
Grout joints is only 1mm or 1/32" very small ...in this kitchen there is only six tiles book much.
Vein is going from one tile to the other 4 tiles as one Picture.
Grout was chosen perfectly as the color of the tile and vein on the tile. They do come with the design from manufacture.
We do have more videos installation with this kind of tile. Please subscribe to see more every week
Hi,how much does this cost?
روعه فنانين تحياتي
kein schallschutz? poreststreifen vergessen?
what do you fill the joints with?
macaw lover epoxy grout
i could like to work with you guys
Nice job, you guys ....
Thank you ...purpose of this video and many more is to show new techniques/tools (tile leveling system) necessary for larger formant "Thin Porcelain Tile" installation 1/4" or 6mm thick.
5'x10'? That's not big enough, why isn't there just one tile for the whole house?
LOL Ikr
Haha. Pmsl 😂
Gracias muyinteresante
JAJAJAAJA HICISTE MI DIA JAJAJA
They will need to make the tile then build the house on it,
Once I have my tile factory I will think about it LOL
Merci
buen trabajo !!
Nice
We have those huge porcelain tiles/marbles they crack. They are expensive and no good because you've gotta replace the whole shit when they crack.
How much is this work?
Please Why is this which holds its tiles called?
Go to www.perfectlevelmaster.com for more information
Polmaster Construction & Tile Ltd I'm a ceramic tile installer and I've just quoted a 6000sf house with this product
Legacy Turbo good for you congrats
Roba da museo... comunque bravi
WHY, because they can I guess,, largest area I ever installed was 500 sq ft of mixed 12 x 18 and 18 x 18 with 12 x 12 porc, tiles
mixed to break up the grout lines,,, can't not imagine doing that myself alone again,, back butter and backer board
this handling system in nowadays obsolete. Yes, it works on polished tiles with when you have textured tiles it does't work at all. In addition it is too weak and it moves a lot putting the slab under a huge tension increasing the risk to break the tile. Since 2015 these kind of tools evolved a lot. Rubi, Raimondi and especially Montolit have developed advanced solutions that allows you to reduce almost to zero the risk to break the tiles. This video is part of the history now. good for museum guys.
Building Tools lots of criticism from your comment at the end... I decided not to delete your comment because you mention about the company's which they do have today (new frame). One thing you did not mention that video was made 2015 those frame for rough surfaces tiles was not available. I hope next comment from you will be more informative for all the viewers ...please watch what you're saying and do little bit more research before you make public come
I used the same handling system before and I experienced a lot of problems. For this reason I put a lot of criticism on my comment. Sorry for that :).
As soon as you have a time you should help the trade posting a new technical video using advanced solutions that are now available. No matter which is the brand to me.
لكن لم نرا التركيب الصحيح او قص الزوايا
Name
Of tile??
very good?, very good?, maladez. perche non ti fermi un po' con la telecamera sulla fuga per far capire ai clienti futuri del incomprensibile fuga mezzavuota? che è un vero problema
where do i get this level system at
+Alfred Martin Please contact the company at info@perfectlevelmaster.com. Thank you.
روووووووعه
What happens when you chip a tile??
it's called life :)
you have to fill the chip with an epoxy filler called tanex + a hardener
very good work.realy really wonderful. thanks you for uploading a good informative video. azmat Hussain
You're welcome... Thank you for your comments.
Please subscribe ..you can see every week more information
Polmaster Construction & Tile Ltd.
No setting in of tile, crushing the ridges down. I expect plenty of trapped air under tiles.
If you don't put a grand piano there, should be OK.
It's simple we are doing 12×6 type of granites and marble not like that ok
sebastian nj ...in india this size is a joke ..bro
Super 👍🏻🇦🇲
It is very beautiful but it is much more expensive, it needs 4 men to set a stone, it needs special equipment, it even needs a heavy machine to load the stones, I think, stones of a meter and a half are more than enough for one Only person settling why it is not only rich that covers poor floor give more profit.
when that bit cracks here i come with a 12x12 piece from home depot to try to make a seamless repair looool
fk this floor
good job......thanks
Thank you
Cutting floor tile
Good job! Kinda looks unfit with a sheetrock walls.
lazynut very good
👍👍👍
One dropped plate , or pot, get the extra out of the attic
And I thoughts I was good at tiling!!!! 😂😂
jeez, at this point you might as well just have a terrazzo floor. Might actually be less expensive than this install.
Мне нравится. Мне нравиться.
Holly shit.. This is a 70 grand flooring...
مرحبا
I m looking dream
They combed mortar wrongly, not to ANSI recommendations and weak coverage in center of slab positions.... may crack.
PeterWCollier regarding combed.We could say "yes" and "no".Depends what you do afterwards.Please check next video and see what's happening when we walk on top of the tiles we have 100% bonding th-cam.com/video/sMjZAYlHvks/w-d-xo.html
Running the comb lengthwise is not the recommended method. "Troweling techniques are critical in creating an even setting bed to insure an adequate and uniform bond coat between gauged porcelain tiles or gauged porcelain tile panels-slabs and substrate.Therefore, it is recommended when troweling gauged porcelain tiles and gauged porcelain tile panels-slabs, with widths greater than 20 inches (0. 5 m), to comb the mortar on the tile from the centre line to the outside edge.
Leaving this start/stop point at the centerline of the tile will insure a uniform setting bed of mortar under the tile body and that the edges of the tile are fully supported." BOTH the mortar application techniques along with a specific walking pattern shall be used to eliminate voids in the mortar while maximizing edge to edge coverage for tiles wider than 20 inches (0.5m).
Peter Collier thank you for your comment please watch that video th-cam.com/video/sMjZAYlHvks/w-d-xo.html that's what we do everyday...we walk on the tiles "gravity" is our friend more videos shows exactly what we/you talking about
I did watch the video... that's not what I am primarily concerned with, other than the fact that if you comb the mortar the length of the panel-slab, rather than the recommended width, you will trap air in the combs of the center of the panel-slab, as shown in the ABOVE video.
Peter Collier yes sir.
وآٹس آپ نمبر ضرور دیں۔لازمی
هايل
هذا الشغل لمضبوط
حسوني ياروحي Gc I have no clue what you want to say in that frase. But YES YOU ARE EXTREMELY CUTE.
Just think of all the work it would take to remove one chipped tile,arrrrrrrggg
To remove and reinstall 4.5 hours
And don't forget to order a few extra tiles to keep on hand in case you happen to drop a beer bottle.
+Ann Ackerman Thank you for the suggestion
This is only for your information that's tiles is special one means is flexible and very hard... definitely beer bottle would not damage this tile
गुड
Muito
Like
👍👍🇵🇸