Secret Profile Pipe! WHY DO WELDERS NOT SPEAK ABOUT IT!
ฝัง
- เผยแพร่เมื่อ 19 มี.ค. 2020
- A very useful idea for every man! To the garage or workshop !!
Friends, my name is Sergey! I am the author of the channel HandiCrafts.
On this channel I present everything that I have done with my own hands.
Creative ideas, useful tips !
We turn simple things into unique ones! Subscribe, it will be interesting! #craft #wood #diy - วิทยาศาสตร์และเทคโนโลยี
Fantastic ! Since watching this video I always cut my tube too short so that I can join it back again like a professional...
4 mins of my life I'll never get back.
Welders don’t tell you about that because they usually don’t plan on separating the material after they weld it Im guessing?
Gracias por compartir, saludos!
Franchement bravo et mille merciiiiii
Waaoooo súper genial..
Well this is very useful for people that do not know or have welfing equipment.
Thank you.
Hi! Sir Sergey your channel was great for all fabricators such as wonderful idea.
Thank s mike
👍👍
Excellent
gute Arbeit und danke für tolles Video 😎👏
Show,ainda não tinha visto desse jeito. Like
Very useful 👍
Bom trabalho amigo 👍
Super execele contenido,🎬📽️🎬 wuauuuu!!! 👌🚀Sigan así🚀 y saludos👍😃 desde zapopan jalisco México 😄🙋♂️
Wow!
How about to use smaller pipe and drill few holes in big pipe and weld it?
Just get some smaller tubing instead...way cleaner...
Vocês são demais!!!
i like your Smile and your idea show
I think it is a cool trick, and although I might never use it, it gives me ideas to store up, and use on future job that you need an alternative solution.
Smaller diameter section of tubing cut about 6 inches and stuffed into 2 larger pieces accomplishes the same thing and adds strength in a 1/4 of the time.
You draw a straight line mark on the street line corner.
Omg. What a talent. 👏👏👏👏
Its useless 🤣🤣🤣
I love the idea I will be using it
If you charged by the hour and the customer found out you were wasting their money doing this you would have no more business
Probably more of a handyman project, of course a fab shop wouldn't do this.
I feel like this would be used for welding pipes together. You could use his solution in case you didn't have access and were doing something DIY at home...
Muy buen travajo
I love it
Rất tuyệt vời...
Such friendly comments....It's great to see sarcasm is alive and well....If you can't weld, why not!...Sometimes, you do what you have to do or can....
Interesting, obviously for disassembly purposes good stuff man
Miguel Medina or extension.... Way to think outside the box
*SERGEY, esos guantes rotos con ese nudillo o dedo quemado me convenció para suscribirme y saber que estoy con alguien que sabe del trabajo.
saludos
Awesome trick
sehr gute idee. danke
Very nice brother. ....
Nice sir g
Super
In der Zeit hab ich schon das nächst kleinere Rohr zugeschnitten und in ein Ende eingeschweißt. Das hält dann auch was aus
Well theres 4 minutes of my life I won't get back.
merci
this is actually very useful if you want to connect a new one to an already vertically installed in high altitude , 2-3 meters. It will make it more secure.
You're very clever
👍👍👍
REAL welders don't feel the need to waste that time. Just weld it!
Real welders know the difference between SQUARE TUBING and pipe too.
@@bobjohnson7797 f1£×6/82
@@tomicask That's what I said.
No kidding !!
@@bobjohnson7797 yyyyyyhhýyyyhyyhyyyhhhhyyyhhyyhyyyhy
I had to check if this was an April fools video... It's not....
I think this guy just makes the guys in the welding world laugh
Just weld it. I don't think you need screws.
Damn it Carl! We're going to have to transfer to an outside position. Outside the company. You're fired.
رائع جدا جدا
What a waste of time. I'd be fired if I did that.
Me too. But I’m not a welder.
Get a better job.
good
☺👍
Gostaria de rever o vídeo da mesa dupla face e do equipamento de fazer barras.obrigado!
there are a lot of these stuff my welder does not talk to me about
😍
mantap
Mantap....tp klamaan...tu
Klw butuh yg kuat...OK 👏👍
This guy is hilarious. Imagine this dude on a construction site!
His nick name will be "double time"
Dotun Arowolo the fact that he’s using paint marker instead of soap stone shows his experiences
👌👌👌👌👍
:) oh God, give me my time back.
Holy Gloves 💥 Batman
It's stronger to put another tube inside....
Nice work.
What kind of camera do you use?
Make like him more solid because if you weld after cleaning the attachments for the two pipes, they are very precarious and risk to move.
Mantaap
Kating super sar
Thanks mate if you haven’t got a welder it’s good idea to join metal together
And that's why welders don't talk about it
Waste of time. Sleeve it, weld it. Why bolt it if you're going to weld it.
My thoughts exactly, I'm no professional welder far from it but the minute I seen him punch holes and drill I was like why bother 🤯
@@michealmcelchar2565 right. Just ridiculous
Well like this it wouldn't need a sleeve, kind of an inner sleeve that becomes welded through and over the gap. Source: 20 years of software development experience.
I figured he was gonna weld the seam. When he started drilling I assumed he was going to just drill through the outside and do spot welds. Pretty much slugging the tube, but then he went rogue.
😮😮😮👏👏👏👏👏👏...
Finally we see,.why welders don't put it on you tube... because it's of no use
Nice!
Bien
Maneiro
Ok this actually brought tears to my eyes.weird
Супер
Une usine à gaz et beaucoup de temps pour rabouter 2 tubes!!!
CARREMENT! Une cornière;2 serres joints >< Ca peut par contre être pratique si le poste à souder tombe en panne par contre : tout est bon à prendre,faut juste savoir faire le tri.Bien à vous.
Oh, fuck with the hell yeah!
What would you use this for?
I think for stands that require portability. Something you can quickly assemble for a job. You'd see this trick for painters or builders that can put together a large stand that would be good for a project then broken down for portability to the next project.
Whats the point? I didn't get it.
Toi bien parlerai le France !
Siap bosQu,,,,good,adakah orang Indonesia yang hadir di sini,mana suaranya,,,,😁😁😁🖐️🖐️🇮🇩🇮🇩👍👍👍
There are many ways of cracking an egg. An ideal joint for brazing. Thanks for posting
no idea why you think this is clever ................
bring him views
He's indian
Hello cuanto te dura la carga de la esmeriladora ??
Your gloves are in the same state as mine 😂😂😂
Its from flex xD 👊🏻🍻🍻
I feel you. I wish you'd see mine
Hãy cho tôi thấy cánh tay của các bạn đến từ Việt Nam với ạ.
We dont talk about it cos noone in there rite mind in my trade would do it ya gronk
‘Cause
No one
Right
Spelling errors. Make sure to check that!
@@__ok. im aussi i can get away with it 🤣🤣🤣🤣
Mitch Noyes it just adds character, I read it in an aussie accent in my head right away.
I'm a welder and dont want to be that guy, but the correct way to spell it in this situation is (their) not there.
I’ll get the boot if i didi this in the shop.
Hello everyone
I thought this was some new way to strengthen a weld the he went and drilled holes in it and didn't even weld it . I have no idea wtf is going on here.
Same same 😄😄
Porque você não PERGUNTAR sobre isso!
Ich dachte immer Schweisser reden nicht weil die ohne Stimmbänder geboren werden. Dank dir kenne ich nun die richtige Antwort!
Danke!
Why do welders not speak of it? Cause it takes a shiz load of time, welding it out and grinding it flush even would take less time and end up with a better looking result
Yeh but how you going to unbolt a weld? Clearly this is made to be something that gets taken on and off, its a ghetto slip joint.
Dale Neish Welders use welds to build things, not bolts. The title of the video makes it seem as if it’s some hidden trick that welders avoid. Welders make things permanent
@@spudatbattleaxe what you've never made something that bolts on, its fabrication.
@@spudatbattleaxe o
This whistelblower is wanted by FBI for sharing this secret.
I don't know, but that seems like a good idea for me. I have a grill that sits too low... Adding a few inches will work perfect for my height
bagus
Bem criativo parabens
splice connections?
Legal
Welders don't talk about it because it's a backyard back that doesn't provide strength.
Track to the studio!!!!!!
Não confia na solda,ou não tem aparelho de solda
To su cevi 40x40mm,u njih idealno ulazi cev od 35x35mm,lakse bi bilo da si ubacio cev u cev i zašrafio
Majstore, nastavlja se cijev istih dimenzija