Part 2 Kalibrgun Cricket .22 Modification, Adjustments and Tuning
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Part 2 of Modification, Adjustments and Tuning
3. Magazines:
a. Marking the magazines for recognizing the last projectile
b. Magazine holders tightening
4. Striker:
a. Polishing the striker spring and the striker
b. Making guiding pin for the striker spring
5. Cylinder
a. Depinger: 30mm
b. Polishing the cutting edges of threads at both ends
6. Filling valve
a. Adjusting, untightening the countersunk screw holding the o-ring
c. Positioning of the manometer
7. Firing valve
a. Adjustment of the retainer of firing valve, and scaleing
b. Polishing the needle
c. Firing valve spring retainer adjustment for the lower pressure work
8. Regulator:
a. Polishing piston and spring washers of the regulator
b. Finding the appropriate working pressure for the regulator (95bar)
c. 4mm adapter of gauge for measuring the pressure after the regulator
d. Increasing the volume of pre-chamber through drilling the spacer
See all parts of KalibrGun, Cricket tuning videos:
Tuning part 1 - • Part 1 Kalibrgun Crick...
Tuning part 2 - • Part 2 Kalibrgun Crick...
Tuning part 3 - • Part 3 Kalibrgun Crick...
Tuning part 4 - • Part 4 Kalibrgun Crick...
My channel: / freemanshooting
![เปิดบ้าน พี่ตูน Bodyslam หลังใหม่คนแรก ที่ภูเก็ต l [Nickynachat]](http://i.ytimg.com/vi/flFwcmyDQSk/mqdefault.jpg)
Thanks for sharing your approach to tuning and cleaning. I don't have a cricket, but I do have 3 other air rifles, and I learned a lot, especially about how to work out what to polish!
The attention to detail is staggeringly good.I could watch this for hours,top work,Sir.
Nice 2 see someone actually fix/adjust/ fine tune a piece of equipment. Hope someone sends this vid to the company.
im seeing so many videos but you are taking special videos very nice sir
Thanks for your answer.
I just did the magazine modification.It's easy and great.
What you did we call it here in Greece ''pateda'' which means easy and clever solutions with tools and things you already have.GREAT!!!!!
Glad I helped with something :-)
Have a great time with your rifle.
Regards
I sold my cricket because of the mag selector setup. Good to see a mod, I now have an Edgun r3m. Nice video, I bet she's shooting well now. Look forward to the vids
Great video. Wish I was brave enough to open up my Cricket .25 like that.
well done man ! a pleasure to se your viedos
Thanks
Raptor-3 interesting and brought to mind.
love ur videos. attention to detail and ur tone is welcoming. im a subscriber for life
+Half Horacio Nelson
Thanks a lot!
please upload soon :)
Great Video. Thumbs UP
Thanks mate
kalibrgun needs to hire you....
+Bernard Reiter
:-)
Holy shit man...thank you for all of this. I still don't own one of these, but I am definitely going to follow your guide. I'm not going to get the model with the mag holders for sure though. Great write up.
you're not right. The holder is very usefull but you have to do this little modification.
When the holder is closed it doesn't open by itself cause it haw magnets. The ''problem'' is that when you open to take a magazine you may drop it.
I'lldo this modification as is very easy.
Kostas Daffy you dont have to do this modd to get the mag to hold if you go to www.biggo.co.uk they supply a bigger oring that replaces the 2 on the mag and it holds it firmly in the mag holder and holds pellets great aswell
a well thought out video bud, i dont have a cricket but will share it on a facebook page for crickets, they loved your last video..
Thanks, best regards.
FreeManShooting
a pleasure you have made great videos for a while now, and dont be put of by anti`s they push your viewing figures up hahahahaha..
great job
Good job there .. i've been watchin your videos and wanted to ask about what camera do u use for taking those close sniper videos and where can i find it !?
Now I am using Casio Exilim 1100... It have a High Speed mode. I am going to do a video about it.
Regards.
Could you make a video showing the accuracy before and after of these tunings? Cheers
Vinicius Rocha No, I have not recorded the accuracy beforehand.
Phew !! , your talent and know how on air guns is amazing. One question Mr Freeman (I'll call you) were only allowed 12 ft/lbs over here , what gun would you recommend to buy for hunting magpies & crows . One without to much in depth tuning.
Regards . Roy ,
Roy Mciver Hello Roy, the cheapest and accurate gun for me is AAS200. It is performing very well for the money in .177 cal.
Nice vid whats the bracket thing on barrel near the block ? An whats it for ? Cheers an keep up the great vids sv
This is for the camera - I will show in the next videos...
Regards.
Well done.Nice job. I aslo have the cricket(the short one) and i'm really happy with its performance.
How did you put the 4mm adapter of gauge for measuring the pressure after the regulator.Did you have to drill or something?
Thanks
There is a 4mm already. You need just to do the adapter of the manometer.
Regards.
hi I'm your fan from Indonesia I'd love to hunt and make a movie with you by using the rifle criket I dreamed for this but I can not have them if you can achieve this dream to hunt with you in an area full of veterinary Toraja.
How did you hook up the pressure gauge to read regulated pressure? I want to lower my regulator pressure to detune my .177 cal to about 15fpe for small backyard pests control.
Many thanks
I mede adaptor to hold the manometer and to go to the cylinder. In the cylinder is 4mm thread as far as I can remember...
How are you doing all this polishing ? Are you using different grits of emery paper ?
Yes and I am finishing with 2000
hey FreeMan
why U so long don't add new vid's on yt .
Broken Rifle not enought time ??
When We can see new " magpie hunt " ( i waiting on this vid )
Thanks From Poland
( I'm sorry about my english )
The only reason is lack of time.
I have a lot of material for videos - looking for time to make them.
Best regards.
FreeManShooting
so quick answer Thank You , now i wait (probably not only me )on new vid's :)
Lot of polish :) Is it now better accuracy?
Yes
Also the pill box where exactly did you put it?
Push it to the center of the cylinder. Should have a small hall for the air flow. Should be very tight, because will go to the fire valve from the pressure waves.
What are you using to polish the parts?
CMR airgunner 1000 grit wet and dry sandpaper and then 2000 for the mirror finish
the gun like this can not enter on vietnam
muốn mua khẩu súng này nhưng ko biết mua chỗ nào
+Sơn Vũ Thế Look at their web site. There is a list of distributers. Also you can write them and ship it to you. Regards.
+FreeManShooting there consignor was not in Vietnam. total value is how much
+Sơn Vũ Thế Mine with extra magazines, cheekpiece and shipping was little under 1000 Euros.
Vietnam is the country banned the use and sale of guns. Is it possible to transfer to me that does not involve the law does not
If you are bannet for air rifle - they will stopp everything at the border.
Well done! I see many hours of work with your bullpup. After this modifications it does a lot of pretty nice time by shooting. . :)
This mods was year ago. From then till now - a lot of shooting...
Videos are coming.
Regards.