The small detail here that's missing is with how the NIKE logo falls onto the cloth. It would never fall flat and remain flat unless it was made out of a super dense material, and that would still need to be really thick. This looks like it's cut from plastic sheet, so the cloth weight would move the logo around when it falls. Just a small detail that would suspend the disbelief a little more. Otherwise - great tut!
Oh I should have mentioned this! Of course, it was a huge inspiration and some pieces are recreations of it! I love the designs and wanted to play with them
Nice One! Thanks! What do you think about using marvelous designer + new cloth system? Your marvelous stuff was awesome and Im courius if you will back to that?
Right now I dont use marvelous so much sadly, because I´m having to much fun in c4d. But I hope that I can combine them in the future at some point again...
@@3DBONFIRE Thanks for answer. Do you think that specific mesh from marvelous can work nice in tandem with c4d? With all wrinkles from marvelous etc? Need to test it.
Very cool tutorial, but I have a very laggy simulation (4fps). My computer is a PC 3060ti(8gb) I5 11400F. 32gb of RAM. Why is this happening? (Cinema4D R25.117)
@@sezerturan4371 no. The simulation of cloth in blender is much worse than in Cinema. The simulation is very slow, it takes a long time to set it up to get the desired result. In cinema it's all quicker from setup to cloth simulation. I have experience with it, it's a terrible simulation. Especially when you compare it to Cinema 4D.
Hello! I'm facing a problem, I added cloth to my plane, then added turbulence but the plane just doesn't wave or have turbulence at all regardless of changing the strength and scale. It's just a flat rectangle. I can't seem to find any solutions on the internet either.
I'm pretty sure, there is a project breakdown +lighting, and some shader lessons. But hey, just write me on patreon if you are not satisfied and you get your money back of course👍
Vanishes...?! I think, I had this issue also! It suddenly appeared for no reason and I have a strong workmashine. Maybe try to delete the cloth tag and apply a new one? I'm not sure when this 'bug' appears...
Hi Ahad, of course I try to sell my patreon, but at the same time you get also knowledge for free on youtube. I think there is nothing wrong with that. Have a nice day, Best Markus
Sometimes more value comes with a pricetag. But I share a lot of knowledge for free on my channel, and sometimes its a bit hard to understand that people think every knowledge is for free... Think about it like this: I need to invest lots of time to learn that stuff and I dont keep it as a secret. I share a lot for free and whoever wants more, can pay for it.
![[Live สด] การออกรางวัลสลากกินแบ่งรัฐบาล งวดวันที่ 16 พฤศจิกายน 2567](http://i.ytimg.com/vi/wPd7VFfWHIA/mqdefault.jpg)
The small detail here that's missing is with how the NIKE logo falls onto the cloth. It would never fall flat and remain flat unless it was made out of a super dense material, and that would still need to be really thick. This looks like it's cut from plastic sheet, so the cloth weight would move the logo around when it falls. Just a small detail that would suspend the disbelief a little more.
Otherwise - great tut!
Good point! I'll do better next time
great share more tips 2023 best 1 video
Looks better than real
awesome easy tutor!!!
Thank you
welcome to another AMAZING TUTORIAAALLL..... im addicted to it. Congrats on the solutions and observations while creating this... very helpful
Haha, thank you😉. I just...love to say this sentence in the beginning of tutorials🌠
thanks for explaining! Ich mag das!
Haha, some perfect german here👌
also my logo is going straight thru the cloth, even tho i have both collider and cloth tags on
My gt710 after this : 💣
The modular kit reminds me alot of the Frevkens accessories by Teenage Engineering!
Oh I should have mentioned this! Of course, it was a huge inspiration and some pieces are recreations of it! I love the designs and wanted to play with them
Bro it's so rare I see a tutorial and think damn I wish I got to that first. This is amazing stuff!
Thank you, Bro💪
muy bien
gut jemacht maggus
Danngge, nexxta👌🔥
cool
Nice work ! What is the software to see all the images at the beginning? it's super smooth
Pureref👌
Can u say about first steps ? i dont understand how i can do it...
tell me please how to make such a smooth viewport window
Nice One! Thanks! What do you think about using marvelous designer + new cloth system? Your marvelous stuff was awesome and Im courius if you will back to that?
Right now I dont use marvelous so much sadly, because I´m having to much fun in c4d. But I hope that I can combine them in the future at some point again...
@@3DBONFIRE Thanks for answer. Do you think that specific mesh from marvelous can work nice in tandem with c4d? With all wrinkles from marvelous etc? Need to test it.
Can you do this with more text?
Very cool tutorial, but I have a very laggy simulation (4fps). My computer is a PC 3060ti(8gb) I5 11400F. 32gb of RAM. Why is this happening? (Cinema4D R25.117)
Yes, I think it can be just slow even on good systems...in that case you could work with a lower poly cloth plane...
I hope there is tutorial like this using blender software. ❤
I don't know if Blender has a good cloth-engine...
of course they have. I've already made one and i can say cloth sim in Blender is very very good
@@sezerturan4371 good to know👍
@@sezerturan4371 no. The simulation of cloth in blender is much worse than in Cinema. The simulation is very slow, it takes a long time to set it up to get the desired result. In cinema it's all quicker from setup to cloth simulation. I have experience with it, it's a terrible simulation. Especially when you compare it to Cinema 4D.
it would be possible to see the materials you used to have the same rendering in terms of quality ? Cordially
I have a tutorial for that on my patreon
Hola
But I can't do it, something it's wrong but I don't know what wrong. Could you saw me the Parameter settings? Thank
I need to call her
Sure, you will do the right thing 👍🌠
ı need this video for my brand
Well, just contact me if you want to book me👍
Hello! I'm facing a problem, I added cloth to my plane, then added turbulence but the plane just doesn't wave or have turbulence at all regardless of changing the strength and scale. It's just a flat rectangle. I can't seem to find any solutions on the internet either.
I had the same problem! I solved it by clicking play on the animation timeline at the bottom haha!
Hey ! Did you find a solution ? I have the same problem, sadly ...
@@vincentlprt unfortunately i did not bro...
@@svsandoval ah man, this didnt work for me
@@Kreyzen Alright, we might found that on another tutorial
Hello, when I simulate the animation my fabric disappears when the logo touches it. How to fix this ? Cordially
Hard to say...cloth is a bit unpredictale sadly...
I wanted to know how a scene identical to this one in blender
Me No Blender sadly
how u get that cool vector logo pack
I just searched for 'sports brand logo' and it was...I think the first search entry to pinterest
What render engine?
you said you'd have an in depth version on patreon, I paid $20 for it and all i see are shader tutorials? whats up ?
I'm pretty sure, there is a project breakdown +lighting, and some shader lessons. But hey, just write me on patreon if you are not satisfied and you get your money back of course👍
what are the specs of your pc?
it is to compare it with my toaster :')
oh hey, these simulations still take some time sadly. I have 2 3090 cards and a Ryzen 5950X and 256RAM
@@3DBONFIRE thanks bro
and with blender?
I know nothing about blender sadly
i tried this on a mac. latest c4d. I think there is a bug because after like frames 30 the cloth just vanishes.
very interesting. switched from GPU to CPU and it no longer vanishes. Working on a mac m1 air. So not the most powerful machine
Vanishes...?! I think, I had this issue also! It suddenly appeared for no reason and I have a strong workmashine.
Maybe try to delete the cloth tag and apply a new one?
I'm not sure when this 'bug' appears...
I only had this once and I think it helped to just add a new cloth tag...
@@3DBONFIRE Can you tell me the specifications of your machine? that moves the simulations fast, the one I have takes about 10 min a frame
why dont you just tilt the plane and logo 90deg and add a collider body and a rigid body?
I can´t remember. Maybe I made it accidentally complicated without intention...
@@3DBONFIRE yeah and you could also have done a sort of bounce to it as well, try giving that a go if you get some time
1
he just wanna sell his patreon page here :(
Hi Ahad, of course I try to sell my patreon, but at the same time you get also knowledge for free on youtube. I think there is nothing wrong with that. Have a nice day, Best Markus
Würde mit dir gerne was besprechen, wo kann man mit dir schreiben?
Am einfachsten auf insta markusgonser3d
could've been a good tutorial. too bad it's been locked by paid subscription for the more "professional" "next level" look
Sometimes more value comes with a pricetag. But I share a lot of knowledge for free on my channel, and sometimes its a bit hard to understand that people think every knowledge is for free...
Think about it like this: I need to invest lots of time to learn that stuff and I dont keep it as a secret. I share a lot for free and whoever wants more, can pay for it.
I'm sorry but this is a total spincter
Haha, oh no...now I can't unsee it🤣
@@3DBONFIRELITERALMENTE
th-cam.com/video/n4yW-As8vXU/w-d-xo.html
I would like to join Patreon
Done I purchased Knight
Thats awesome👍 thanks for your support
@@3DBONFIRE I have sent message on patreon with request please help me to solve
surprised no one else commented about it looking like a butthole.
I'm also pretty surprised.