Thank you very much for this vidéo and for the link that you give us, I bought and I try one my Ford Focus mk2 1.6tdci and it work ! A great video and good explanation in english with the subtitle, Thank you
Hvala ti za video. Imam Cmax 2008. Narucio s Aliexpressa. S dostavom: tipke 150kn + 80kn dijagnostika. Brzina citanja mi je morala biti najsporija, drugacije se nije htio povezati, ali uz malo duzi proces, svi koraci su ti tocni i tempomat radi! Bas sam se odusevio...iako nisam niti znao da ce se lampica tempomata upaliti samo zeleno, kada vec u voznji stisnem ON, a onda i SET. Ocekivao sam, kao kod nekih novijih auta da bude zuta lampica kada stisnem ON,...i tu sam se scimao da ne radi.
Hello, could you please tell me which ELM module you used? I have an ELM 327 version 1.5 with a switch from Aliexpress? Do it work? I also have a C-Max 2008 petrol 1.6. Thank you.
Hello man, thank you for the video really helpfull. I have a question as you can see at 18:24 the "read calibration data" check mark is grayed out for me so I can't check the mark. Do you know how to make it able to a check mark?
@@Workshop385Hi, thank you for the reply. I have a mk2.5 or the so called facelift 1.6 petrol engine. From some searches online I came to the conclusion that that check mark is only for diesel engines? correct me if I'm wrong. I did the "Read firmware from PCM to BIN file" part, but I didn't want to continue until I got your suggestion. So I can continue the steps shown in the video without the "calibration data only" checked then? Thanks again
Try it... I've never done this on petrol engines. Be sure to make a backup first and use ELS27. Here is some fun fact - Focus ST 2.5 doesn`t have cruise control map in engine ecu 😂
@@Workshop385 Yeah I was thinking of buying an ELS27 before writing to PCM just as a backup in case something goes wrong. Thank you again for the video, I wouldn't have done this if it wasn't for your video 😁
Prije svega, odličan video detaljno objašnjeno. Može li se na 1.6 tdci 2005 mk2 ovo odraditi, i možete li staviti nove linkove gdje kupiti sve što treba? Ovi eBay linkovi više ne vrijede😢. Hvala
Zdravo prije svega svaka cast na objasnenja ja imam ford fokus c-max ghia kad upalim prekidac za dugacko svetlo pozicija se ugasi bio je kod neki priuceni majstora menjali su mi tabla i je doslo do taj problem pa me interesuje dali i kako moze da se ukloni problem hvala unapred
Bar je na focusu to jednostavno. Treba provjeriti konektore u faru i izlaze sa comfort modula. On se nalazi ispred suvozačevih nogu. Vjerojatno je comfort modul mjenjan i ostala upaljena opcija dnevnih svijetala (pretpostavljam)
hi, could someone help me out : (18:00) I'm not sure what type of EDC I have but mine is a ford focus mk2.5 2010 1.6 109cv titanium. when I read the PCM it doesn't tell me anything like in the video it reads it directly, the problem is that it isn't indicated to me (integrated Speed Control) if I insert it and click "write in PCM" it tells me (File frw.dat is missing) by pressing okay it tells me (PCM doesn't match the chosen PCM type ) same thing happens when I want to read the "PCM to BIn-file) can someone help me I've been trying for a long time and I can't, thank you very much.
Pozz Ovo me Interesuje testiranje tipki. Kada držiš ovaj prekidač grijanja zadnje šajbe. Na mondeo mk4 to ne radi tako. Znas li drugi način za mondeo mk4 2007god
Hello and thank you for video. I have a FF MK2.5 comfort year 2010. My gem model is 7M5T-14A073-BE (does not start with 4M5T) Does this model support Cruise Control?
Hello! I have a FF 2010 1.6 tdci 90cp eu5. I have made the exact steps you made on all 3 modules. in the PCM made 1 page and then read calibraton data and then upload the bin but it still doesn't work. I have all the wires attached properly to the steering, the GEM modules is fine, the brake and clutch pedal have the same whire as yours. I have 9m51 12a650-ag file so it is Bosch. Do you have any idea where the problem is?
Hello man my GEM ends with -BD; how can i do it? do i connect red and black cable from gem module directly to steering wheel? how do i know which one is 10 and 18th pin?
Hi, I'm trying to install in my Focus ST mk2 but it doesn't work. I've activated all modules (PCM, GEM and HEC) and the car recognised the cruise control buttons, but nothing happens. I've tried to find if someone with a ST mk2 gets it to work but doesn't. Any idea or information why or any solution? TY.
You will need someone to modify your engine map. ST models don`t have a piece of code on the engine map dedicated to cruise control. No ST came out of the factory with cruise control.
@@Workshop385 Ok ty, but what module do you think that requiere to be modified (PCM, perhaps)? Do you know more or less if it is difficult to do for any ECU's programmer and find out the command/s line/s that works the CC? I have read that if you compare any other BIN archive the other focus mk2 that came out of the factory with CC, and introduce this/these same command's line/s in the BIN focus ST, it would work. What do you think? Ty so much man.
@@TRAXXAS4x4cars Do not waste your time, it is not possible excepting you find a programmer that is able to add this programming's lines that concern to CC. Some key are that the Ford Kuga mk1/and Mondeo mk3 or 4 with the same 2.5 turbo motor, they had the possibility to add the CC. Then, the idea is to scan and compare archive PCM module from Focus and Kuga or Mondeo and try to add the lines concern to CC. The idea is there but i need someone that knows as do it. I try to find someone to at least understood the procces and anyone wanted to do or been able to do it. Then, or you install an aftermarket kit (300-350 euros, with a difficult instalation), or you play with the pedal as always. Me, this last one :)))
Hello. I'm trying to do the same on Ecosport 1.6S 2016. I did conect the cruise control modelue, it gets on the backlight, and I did enable cruise control with forscan on the IPC module (it is the only one that it has cruise control options). But I'm getting two errors: P0581:13 on ODDTCs and P0581:13-48 CMDTCs Both are telling me that I have high voltage on channel A of the switch on the cruise control module. I don't know what to do. Could you help me?
Pozdrav, odlican video i jos bolje objasnjeno, dali si mozda istrazivao kako instalirat kameru za voznju u natrag, imam focusa 2017 MK3.5 sa sync3 narucio djelove itd, ali dali kod za aktivirat kameru na focusu ST, focusu karavan su isti, pitam iz razloga jer vecina video tutorijala je za focus ST, HVALA
Ako imaš sync 3 trebalo bi se to moći napraviti... nisam nikad to pokušavao jer inače čačkam samo po autima koji su moji, kodovi bi trebali biti isti. Uglavnom skineš Forscan i ako imaš ELM27 s njega bi trebao moći aktivirati bez prevelikog kopanja po kodu... samo dodaš kvačicu i to je sve
@@Workshop385 hvala, nasao rjesenje, nisam probao cekam djelove ali ako nekom treba ovako bi to trebalo ici 1- Go to the APIM As-Built 2- Do a backup of your original APIM (just in case) 3- Change block 7D0-01-01 x*xx-xxxx-xxxx *=3 With camera no PDC *=9 No camera with PDC *=B With camera and PDC
Poz druze kod mene na focus mk2.5 2010god kod mene na tablu sa osiguracima pise BF i kako sam broio zice 10 i 18 mena ih a lampicu za tempomat ima na saltabli jel se moze se povezat tempomat.
POZ! Imam mazdu 3 2006 1.6 dizel ,nabavio sam komande,ali u elm config nece da mi prikaze u GEM ,page 3 ,izbaci greska runtime error 13 type mismatch i izadje iz elm config.....??? Na jednom forumu sam procitao da su ljudi uspevali na taj auto da aktiviraju,ali ne mogu da ih kontaktiram....
Hi, does anyone knows a shop who would install the buttons (which i bought already) and activate the cruize control from the computer in Spain or Portugal? Thanks
Ford Focus mk2 Flexfuel 1.8 2008 , hor kan programera farthållare..? Jak zaprogramowac tempomat.... silnik 1.8 Flexfuel E-85 pozdrawiam i dziekuje za pomoc
Kod mene je modul sa oznakom B, i nema zice od volana do modula. Hoces da kazes, da iako provučem zicu koja je dosla uz prekidace do modula, da neću, uopste moci da aktiviram tempomat? Ne postoji šansa? Hvala unapred
Potrebno je zamjeniti Gem modul i povući kabel . To nije problem i nije skupo. Nađe se polovnih za 50€. Kod mene je bila oznaka A, ali je sve bilo provučeno. 2005 godina.
@@Workshop385 znaci B nikako nema mogucnost da se ukodira? Jedini način je da se zameni sa D oznakom i tada ce moci? I kod mene je 2005 godina. Sve prekidace imam na papučicama, i lampica na tabli radi, ali od volana do modula nemam.
Ne možeš ništa zeznuti ako pokušaš uključiti za probu. Kad kodiraš GEM modul, učitaš trenutne podatake, staviš kvačicu na cruise control i klikneš "Write to GEM". Ako je kodiranje bilo uspješno, kad ponovno učitaš podatke sa modula, ta kvačica će biti uključena. Ako nije bilo uspješno, kvačica će nestati. Uglavnom, ne možeš ništa zeznuti. Po internetu sam istraživao, svaki "D" modul se može kodirati, neki su uspjeli kodirati "C" modul... dok na "A" i "B" modulima nije nitko uspio. Ali kažem, nije problem ubaciti drugi modul i iskodirati ga... doslovno 10 minuta posla.
@@Workshop385 da da, odgledao sam klip, desetak puta 😀.... Pokušao sam danas ugradnju, ali kad sam video da nema zica, odustao sam trenutno, dok ne vidim gde treba zice da se dodaju kod volana. I ove zice koje su stigle uz prekidace, su crna i crvena, a u dzek modula idu bela i smedja boja. Hvala na pomoci svakako. Ovaj klip je bas pomogao dosta.
@@borisugljevar2670 Ako si zapeo oko provlačenja instalacije i treba ti pomoć, nije mi problem rastaviti kod mene pa da usporedimo. Boje žica nisu bitne, kao ni njihov redosljed jer prekidači na volanu zapravo samo daju otpor - ništa drugo. Svakako bi mi bilo drago ako budeš radio oko toga da se registriraš na workshop385.com/index.php i uploadaš koju fotografiju - možda pomogne drugim ljudima koji nemaju provučenu instalaciju od volana do GEM modula.
Pozdrav. Ja sam kupio ford focus c max 1,6 (115ks) i volio bi ugraditi tempomat. Provjerio sam i ima lampica za tempomat. Koliko košta programiranje kod vas i odakle ste da dodjem to uraditi kod vas? Ja sam iz Slovenije. Lp Nikica
To answer my own question, yes, it does work. Cruse control fully works now. I didn't even have to rewrite the PCM. Just tick all of the activation boxes and write and it worked perfectly
Is it possible to modify the speed where the cruise control starts? Mine is at 40 km/h. Every other car that I know starts at 30 km/h. I also once drove a car, that starts at 10 km/h. But I just want to be able to drive 30 km/h with my cruise control.
Hello, thank you for the video . Does anyone know the name and size of the pins that slot into the blue plug, on pins 10 and 18? I don't have those wires in my GEM, so will run them down from the steering wheel. I think they are called "IDE Molex 4.2mm 5556-PT Female Crimp Terminal Pins" but that is just a guess. The blue plug is called c103, I think. I need to know what pins to crimp on to the end of the wires, then I plan to insert them into the blue c103 plug, then plug that back into my GEM. Thanks for any help
Pozdrav, da li mozda znas da li je ista procedura i za focusa MK3 2011-2014? Mislio sam samo promijeniti volan koji vec ima tempomat tipke i ukljuciti ga softverski...puno hvala na odgovoru 👍🏻😀
Pozdrav.. Opet ja 😀... Zamenio sam auto sad ima restajling mk2 1.8 tdci 2009 god.... Ugradio sam tastere... I uradio programiranje, prihvatio je sve, ali u Pcm nece da zapamti tempomat... Na ovaj laksi nacin koji si objasnio. Mozda bi zapamtio na onaj tezi gde si zajebo stvar, ali mi frka to da probam 😀... Na koji nacin je tebi upamtio? Inace C je slovo modula 😪, ali, nadao sam se da ce moci... Hvala unapred
Kratak update... Operacija uspesno obavljena isprobano sve radi. Uradjeno na tezi nacin, onom tvojom prvom metodom je uspelo. Znaci aktivirano na C modulu...
Pozdrav, dali mozda znas jeli ista procedura za mondea mk3 2.0 tdci 130 ks, imao sam sve u auti osim tipki i stavio sam tipke pa sad treba softverski upaliti pa me zanima gdje se nalazis i dali bi znao to na mondeu napraviti. LP
Hi can someone help me to connect my elm327 with my car ? I buy an elm327 usb adapter from eBay I installed then I install elmconfig 0.2.17b I run the program but I couldn’t connect with car . I choice english then driver V(CP) Port: Com7 Baudrate I choice 38400 like in the com Port settings, conection: Focus 11/ CMax/Kuga then Open port then I get error : Link with adapter failed ! If someone’s can help me
Mogu slobodno ić gledat ruska videa i tražit po ruskim forumima kako se ovo ugrađuje. Ili gledat TH-cam videa gdje čovjek provlači, a ni "a" ne kaže. Sretno im bilo 😁
bravo! jasno, jednostavno i edukativno, odlican video !
Thank you very much for this vidéo and for the link that you give us, I bought and I try one my Ford Focus mk2 1.6tdci and it work !
A great video and good explanation in english with the subtitle, Thank you
Super objašnjeno 👍
Hvala ti za video. Imam Cmax 2008.
Narucio s Aliexpressa. S dostavom: tipke 150kn + 80kn dijagnostika. Brzina citanja mi je morala biti najsporija, drugacije se nije htio povezati, ali uz malo duzi proces, svi koraci su ti tocni i tempomat radi! Bas sam se odusevio...iako nisam niti znao da ce se lampica tempomata upaliti samo zeleno, kada vec u voznji stisnem ON, a onda i SET. Ocekivao sam, kao kod nekih novijih auta da bude zuta lampica kada stisnem ON,...i tu sam se scimao da ne radi.
Koji je motor u pitanju? 1.8 ili 1.6?
@@Workshop385 1.6 66kw
@@MrKornelKokiSmoki ok... da znam da vrijedi i za 1.6 motore. Hvala! :)
Hello, could you please tell me which ELM module you used? I have an ELM 327 version 1.5 with a switch from Aliexpress? Do it work? I also have a C-Max 2008 petrol 1.6. Thank you.
Great Video, I sucessfully enabled cruise control on my 07 Ford Focus wirh -BJ GEM Serial Number!
bro how did you do it? mine hsa -BD; did you have to connect red and black cable from gem module directly to steering wheel?
@@uvejssokoli4620 mine already had the wires connected
great video man thx for the tutorial
Hi, just followed everything you did worked well for me thank you so much, ❤
I`m happy to hear that ❤
Bro you are super,nice work and difficult though.....
It worked fine. Thank you very much for the info. Ford Focus 2007 flexifuel
What did You used? Elm or els?
I am going to try this, I will keep you updated to see if it works for me....
did it work?
@@Lushn25 I am wondering too
We’ve been waiting patiently for 6 months dude
I guess they are still enjoying the cruise 😂
Great video, thanks!
Hello man, thank you for the video really helpfull. I have a question as you can see at 18:24 the "read calibration data" check mark is grayed out for me so I can't check the mark. Do you know how to make it able to a check mark?
You don`t need to check that, but it will take longer to read. You have Focus Mk2 with 1.8TDCI engine?
@@Workshop385Hi, thank you for the reply. I have a mk2.5 or the so called facelift 1.6 petrol engine. From some searches online I came to the conclusion that that check mark is only for diesel engines? correct me if I'm wrong. I did the "Read firmware from PCM to BIN file" part, but I didn't want to continue until I got your suggestion. So I can continue the steps shown in the video without the "calibration data only" checked then? Thanks again
Try it... I've never done this on petrol engines. Be sure to make a backup first and use ELS27. Here is some fun fact - Focus ST 2.5 doesn`t have cruise control map in engine ecu 😂
@@Workshop385 Thank you I appreciate your help. And the fact that the ST is the more premium version of the car makes it even more ridiculous 😂😭😵
@@Workshop385 Yeah I was thinking of buying an ELS27 before writing to PCM just as a backup in case something goes wrong. Thank you again for the video, I wouldn't have done this if it wasn't for your video 😁
Prije svega, odličan video detaljno objašnjeno. Može li se na 1.6 tdci 2005 mk2 ovo odraditi, i možete li staviti nove linkove gdje kupiti sve što treba? Ovi eBay linkovi više ne vrijede😢. Hvala
Is this working on any type of engine, like 1.6 Ti-vct?
Zdravo prije svega svaka cast na objasnenja ja imam ford fokus c-max ghia kad upalim prekidac za dugacko svetlo pozicija se ugasi bio je kod neki priuceni majstora menjali su mi tabla i je doslo do taj problem pa me interesuje dali i kako moze da se ukloni problem hvala unapred
Bar je na focusu to jednostavno. Treba provjeriti konektore u faru i izlaze sa comfort modula. On se nalazi ispred suvozačevih nogu. Vjerojatno je comfort modul mjenjan i ostala upaljena opcija dnevnih svijetala (pretpostavljam)
hi, could someone help me out : (18:00) I'm not sure what type of EDC I have but mine is a ford focus mk2.5 2010 1.6 109cv titanium. when I read the PCM it doesn't tell me anything like in the video it reads it directly, the problem is that it isn't indicated to me (integrated Speed Control) if I insert it and click "write in PCM" it tells me (File frw.dat is missing) by pressing okay it tells me (PCM doesn't match the chosen PCM type ) same thing happens when I want to read the "PCM to BIn-file) can someone help me I've been trying for a long time and I can't, thank you very much.
Problem solved! Reinstalled program! Thanks bro
00:53 I have BB not D or C. Is it possible to add?
Me to. If someone know, please, don't be shy to answer. The installation is there but the code is BB.
Pozz
Ovo me Interesuje testiranje tipki.
Kada držiš ovaj prekidač grijanja zadnje šajbe.
Na mondeo mk4 to ne radi tako.
Znas li drugi način za mondeo mk4 2007god
Hello and thank you for video. I have a FF MK2.5 comfort year 2010.
My gem model is 7M5T-14A073-BE (does not start with 4M5T)
Does this model support Cruise Control?
Hello! I have a FF 2010 1.6 tdci 90cp eu5. I have made the exact steps you made on all 3 modules. in the PCM made 1 page and then read calibraton data and then upload the bin but it still doesn't work. I have all the wires attached properly to the steering, the GEM modules is fine, the brake and clutch pedal have the same whire as yours. I have 9m51 12a650-ag file so it is Bosch. Do you have any idea where the problem is?
GEM "CF" is compatible with cruise control?
Does this work for the Mk2 ST? I've heard that extra work is required
Any info that E GEM module will work? MK3 2011
Say if you want to swap engine from 1.8 Flexifuel to 2.0, can you just save the engine data from donor car ECU and load it to your ECU?
Hello man my GEM ends with -BD; how can i do it? do i connect red and black cable from gem module directly to steering wheel? how do i know which one is 10 and 18th pin?
Great video! Does GEM CE work? And also engine 2.0 gasoline+lpg works? On a c-max 2008. Thank You!
So I did everything until I tried to read from PCM, there is a problem, it shows error, and it wont read anything.
Hello, thank you for the video. I have a Focus ST 2007 (2.5T engine) and my module has "JB". Would it work with this module?
Did you ever try this and get it to work on your ST?
Hi, I'm trying to install in my Focus ST mk2 but it doesn't work. I've activated all modules (PCM, GEM and HEC) and the car recognised the cruise control buttons, but nothing happens. I've tried to find if someone with a ST mk2 gets it to work but doesn't. Any idea or information why or any solution? TY.
You will need someone to modify your engine map. ST models don`t have a piece of code on the engine map dedicated to cruise control. No ST came out of the factory with cruise control.
@@Workshop385 Ok ty, but what module do you think that requiere to be modified (PCM, perhaps)? Do you know more or less if it is difficult to do for any ECU's programmer and find out the command/s line/s that works the CC? I have read that if you compare any other BIN archive the other focus mk2 that came out of the factory with CC, and introduce this/these same command's line/s in the BIN focus ST, it would work. What do you think? Ty so much man.
@@Miorsp hey I have an ST as well and looking to do this, did it work for you?
@@TRAXXAS4x4cars Do not waste your time, it is not possible excepting you find a programmer that is able to add this programming's lines that concern to CC. Some key are that the Ford Kuga mk1/and Mondeo mk3 or 4 with the same 2.5 turbo motor, they had the possibility to add the CC. Then, the idea is to scan and compare archive PCM module from Focus and Kuga or Mondeo and try to add the lines concern to CC. The idea is there but i need someone that knows as do it. I try to find someone to at least understood the procces and anyone wanted to do or been able to do it. Then, or you install an aftermarket kit (300-350 euros, with a difficult instalation), or you play with the pedal as always. Me, this last one :)))
@@Miorsp damn I was pretty exited to do this install but it’s to much work, I’m just going to use the pedals and control on my own, thanks.
Hello. I'm trying to do the same on Ecosport 1.6S 2016. I did conect the cruise control modelue, it gets on the backlight, and I did enable cruise control with forscan on the IPC module (it is the only one that it has cruise control options).
But I'm getting two errors:
P0581:13 on ODDTCs and
P0581:13-48 CMDTCs
Both are telling me that I have high voltage on channel A of the switch on the cruise control module.
I don't know what to do. Could you help me?
Any confirmed information that at -JE GEM module it will work? I know you are talking about D GEM but maybe anyone?
I saw GEM with "JE" module in C-max. I enabled cruise control without any problems.
Pozdrav, odlican video i jos bolje objasnjeno, dali si mozda istrazivao kako instalirat kameru za voznju u natrag, imam focusa 2017 MK3.5 sa sync3 narucio djelove itd, ali dali kod za aktivirat kameru na focusu ST, focusu karavan su isti, pitam iz razloga jer vecina video tutorijala je za focus ST, HVALA
Ako imaš sync 3 trebalo bi se to moći napraviti... nisam nikad to pokušavao jer inače čačkam samo po autima koji su moji, kodovi bi trebali biti isti. Uglavnom skineš Forscan i ako imaš ELM27 s njega bi trebao moći aktivirati bez prevelikog kopanja po kodu... samo dodaš kvačicu i to je sve
@@Workshop385 hvala, nasao rjesenje, nisam probao cekam djelove ali ako nekom treba ovako bi to trebalo ici
1- Go to the APIM As-Built
2- Do a backup of your original APIM (just in case)
3- Change block 7D0-01-01 x*xx-xxxx-xxxx
*=3 With camera no PDC
*=9 No camera with PDC
*=B With camera and PDC
Poz druze kod mene na focus mk2.5 2010god kod mene na tablu sa osiguracima pise BF i kako sam broio zice 10 i 18 mena ih a lampicu za tempomat ima na saltabli jel se moze se povezat tempomat.
Ako nema navedene žice treba pogledati shemu i povezati ih sa zavojnicom volana tj. prekidačima na volanu.
Ola tenho um focus mk 2.5 glx 1.6 motor sigma consigo intalar o cruise control nele ? Nao sei si ele permite essa ativação sou do brasil 😅
which adaptor is the one that worked? That you end up using?
Can this be done with Forscan?. If so can you do a quick tutorial...
No option for ecu programming. use elm config
Može li programiranje da se odradi preko launch dijagnostike?
Nebih znao, ali vjerojatno ne...
@@Workshop385 Hvala za odgovor.
POZ! Imam mazdu 3 2006 1.6 dizel ,nabavio sam komande,ali u elm config nece da mi prikaze u GEM ,page 3 ,izbaci greska runtime error 13 type mismatch i izadje iz elm config.....??? Na jednom forumu sam procitao da su ljudi uspevali na taj auto da aktiviraju,ali ne mogu da ih kontaktiram....
Hi,
does anyone knows a shop who would install the buttons (which i bought already) and activate the cruize control from the computer in Spain or Portugal?
Thanks
Ford Focus mk2 Flexfuel 1.8 2008 , hor kan programera farthållare..?
Jak zaprogramowac tempomat.... silnik 1.8 Flexfuel E-85
pozdrawiam i dziekuje za pomoc
Da li si mozda na ovom Fordu imao problem da mu nestaje struje i auto se ugasi i upali?
Imao sam problem da su kleme od akumulatora korodirale, pa sam ih trebao očistiti. Ostao sam bez struje kad sam ga išao upalit.
Kod mene je modul sa oznakom B, i nema zice od volana do modula. Hoces da kazes, da iako provučem zicu koja je dosla uz prekidace do modula, da neću, uopste moci da aktiviram tempomat? Ne postoji šansa? Hvala unapred
Potrebno je zamjeniti Gem modul i povući kabel . To nije problem i nije skupo. Nađe se polovnih za 50€. Kod mene je bila oznaka A, ali je sve bilo provučeno. 2005 godina.
@@Workshop385 znaci B nikako nema mogucnost da se ukodira? Jedini način je da se zameni sa D oznakom i tada ce moci? I kod mene je 2005 godina. Sve prekidace imam na papučicama, i lampica na tabli radi, ali od volana do modula nemam.
Ne možeš ništa zeznuti ako pokušaš uključiti za probu. Kad kodiraš GEM modul, učitaš trenutne podatake, staviš kvačicu na cruise control i klikneš "Write to GEM". Ako je kodiranje bilo uspješno, kad ponovno učitaš podatke sa modula, ta kvačica će biti uključena. Ako nije bilo uspješno, kvačica će nestati. Uglavnom, ne možeš ništa zeznuti. Po internetu sam istraživao, svaki "D" modul se može kodirati, neki su uspjeli kodirati "C" modul... dok na "A" i "B" modulima nije nitko uspio. Ali kažem, nije problem ubaciti drugi modul i iskodirati ga... doslovno 10 minuta posla.
@@Workshop385 da da, odgledao sam klip, desetak puta 😀.... Pokušao sam danas ugradnju, ali kad sam video da nema zica, odustao sam trenutno, dok ne vidim gde treba zice da se dodaju kod volana. I ove zice koje su stigle uz prekidace, su crna i crvena, a u dzek modula idu bela i smedja boja. Hvala na pomoci svakako. Ovaj klip je bas pomogao dosta.
@@borisugljevar2670 Ako si zapeo oko provlačenja instalacije i treba ti pomoć, nije mi problem rastaviti kod mene pa da usporedimo. Boje žica nisu bitne, kao ni njihov redosljed jer prekidači na volanu zapravo samo daju otpor - ništa drugo. Svakako bi mi bilo drago ako budeš radio oko toga da se registriraš na workshop385.com/index.php i uploadaš koju fotografiju - možda pomogne drugim ljudima koji nemaju provučenu instalaciju od volana do GEM modula.
Hellot my gem module has a ce ending I added buttons and activated cruise control and error p0581 is displayed what went wrong?
Pozdrav imam ford focus mk2 2005 1.6tdci(109ks) titanium oprema,zeleo bih da zamenim tablu(kilometar sat) od restyle 2008,da li je to moguce?
Moguce je 🙂
@@Workshop385 odlicno,hvala vam
@@danijelstojimenovic7334 samo treba tablu kodirat...
@@Workshop385 kako to ide?
I get failed to connect with the elm327!! Any idea.
programmed my mk2fl 2007 1.8. nothing happened. drove car then it started working. I believe ecu sometimes needs to adapt to calibrations
Pozdrav. Ja sam kupio ford focus c max 1,6 (115ks) i volio bi ugraditi tempomat. Provjerio sam i ima lampica za tempomat. Koliko košta programiranje kod vas i odakle ste da dodjem to uraditi kod vas? Ja sam iz Slovenije.
Lp Nikica
My Gem module has the letter "B" but when I go into elm config. It shows it and I have all the switches on the pedals
To answer my own question, yes, it does work. Cruse control fully works now. I didn't even have to rewrite the PCM. Just tick all of the activation boxes and write and it worked perfectly
Mozes preporuciti dijagnostiku za taj posao link neki nesto
ELS27 je najbolja za Forscan / ELM Config
Pozdrav druze potrebna mi je pomoc pliz
Kad hocu da odradim u pcm pojavi mi se
File frw.dat is missing
Is it possible to modify the speed where the cruise control starts? Mine is at 40 km/h. Every other car that I know starts at 30 km/h. I also once drove a car, that starts at 10 km/h. But I just want to be able to drive 30 km/h with my cruise control.
Good question, but I don't know right answer. It can't be changed with Forscan as I know 😄
Hello, thank you for the video . Does anyone know the name and size of the pins that slot into the blue plug, on pins 10 and 18? I don't have those wires in my GEM, so will run them down from the steering wheel. I think they are called "IDE Molex 4.2mm 5556-PT Female Crimp Terminal Pins" but that is just a guess. The blue plug is called c103, I think. I need to know what pins to crimp on to the end of the wires, then I plan to insert them into the blue c103 plug, then plug that back into my GEM. Thanks for any help
Pozdrav, da li mozda znas da li je ista procedura i za focusa MK3 2011-2014? Mislio sam samo promijeniti volan koji vec ima tempomat tipke i ukljuciti ga softverski...puno hvala na odgovoru 👍🏻😀
Jesi li uspio spojiti tempomat na MK3 mene isto zanima...?
Pozz, gdje Vas mogu kontaktirati u vezi jednog pitanja?
Pozz Luka, kao što sam rekao u chatu, mžeš na instagram : workshop385_ ili na W385 Forumu : workshop385.com
@@Workshop385 Hvala Puno, Javim se sjutra😀
@@Luka-ov1hu okej ☺
Dali se moze ukljuciti ESP na ovakvog fokusa
Gledao sam oko toga, treba mjenjati centralu absa i možda još par stvari... uglavnom može se
@@Workshop385 hvala na odgovoru
Odlicno
Da li može ako imam Gem modul sa slovom B?
nop
Moze pomoc? Zeznuo sam nesto pri upisivanju i nemogu da upalim auto
Vrati backup i biti će ok. Ako nemaš backup možeš pokušati sa upisivanjem ključa u Pcm, no to nisam pokušavao 😳
@@Workshop385 rešeno, radi tempomat
@@autosportivo2422 uh, dobro je... 👍
Pozdrav.. Opet ja 😀... Zamenio sam auto sad ima restajling mk2 1.8 tdci 2009 god.... Ugradio sam tastere... I uradio programiranje, prihvatio je sve, ali u Pcm nece da zapamti tempomat... Na ovaj laksi nacin koji si objasnio. Mozda bi zapamtio na onaj tezi gde si zajebo stvar, ali mi frka to da probam 😀... Na koji nacin je tebi upamtio? Inace C je slovo modula 😪, ali, nadao sam se da ce moci... Hvala unapred
Da li mislis mozda da uopste ne moze na C ili mozda da se proba na ovaj prvi način zapisivanja.. Kolko sam gledao, tako uglavnom na benzincima rade..
Kratak update... Operacija uspesno obavljena isprobano sve radi. Uradjeno na tezi nacin, onom tvojom prvom metodom je uspelo. Znaci aktivirano na C modulu...
Jel isti princip i za mondeo mk3?
Ne znam, nisam proučavao... 😃
Mislim da na Mondeu treba 8 puta dat i isključit kontakt dok se ne čuje "beep" za kodiranje daljinskog otključavanja
Pozdrav, dali mozda znas jeli ista procedura za mondea mk3 2.0 tdci 130 ks, imao sam sve u auti osim tipki i stavio sam tipke pa sad treba softverski upaliti pa me zanima gdje se nalazis i dali bi znao to na mondeu napraviti. LP
Meni kad pritisnem tepomat restartuju mi kilometražu
svašta :D
Hi can someone help me to connect my elm327 with my car ? I buy an elm327 usb adapter from eBay I installed then I install elmconfig 0.2.17b I run the program but I couldn’t connect with car . I choice english then driver V(CP) Port: Com7 Baudrate I choice 38400 like in the com
Port settings, conection: Focus 11/ CMax/Kuga then Open port then I get error : Link with adapter failed ! If someone’s can help me
I've runned as admin, and after a couple of tries it worked
@@matheusmoraesm thanks for reply I found out the cable was faulty so I replace with another one and everything work spot on ! Thanks
Salut! Ai reușit să activezi pilotul cu elm?@@Marioboy19
Nem kell "D" karakter. Ez hülyeség! "B" elég!
Ahh that is very good news! I have a "B" GEM, I will try to reprogram it soon. Thanks for the information. :-)
@@thedeepsfix got you this ?
@@olehleo hi yes it's all working now on a B gem.
Wa4
Mogu mislit sta engezi govore
Roses are red violets are blue title is english why arent you.
Mogu slobodno ić gledat ruska videa i tražit po ruskim forumima kako se ovo ugrađuje. Ili gledat TH-cam videa gdje čovjek provlači, a ni "a" ne kaže. Sretno im bilo 😁
Haha točno😀
Great video! Thank you so mutch for sharing