Thanks! It really helped. I was already thinking of retiring my old man, but it's a pity. After all, my bro has been helping me out for 15 years. Now my children will soon be printing essays on it.
Thank you for posting this, it gave me some pointers to fixing the same fault on my HL-2150. The root cause of the problem is a little foam sound-deadening pad which gets pressed by the lever when the T1 solenoid is energised. Over time this pad becomes sticky and causes the lever to hang in the 'energised' position, initiating another paper feed before the previous sheet is printed and thus causing a jam. Tensioning the return spring, as you have done here, may help for a while but the real solution is to get rid of the sticky pad. You can either cover it with a bit of paper, remove it altogether or replace it with a small piece of felt as I have done with mine. This requires a bit more dismantling but should give a more lasting repair. I hope this helps. Thanks again for the video and your English is a lot better than my Arabic!
Thanks alot for this declaration. Always aim removing the old pad from the relay and just keep any glossy stickers. This is done in more than one video in the Chanel's. th-cam.com/video/yGlhHvkQTb8/w-d-xo.html
شــــــــــــــــاهد /\ /\ /\ /\ /\ /\ /\ المـــــــــــــــــزيد Playlists يمكنك الاطلاع على كافة قوائم التشغيل في القناة من هذا الرابط th-cam.com/channels/MQEb5XU2e0hKfPiH2QRnrQ.htmlplaylists?view_as=subscriber
طبعا هذه المشكله متكرره في اغلب الطابعات وخصوصا البراذر وكمان طابعات hp سبب المشكله ان magnetic relay فيه على السطح وساده وعند تلفها تكون هناك ماده لزجه وعند نزول السنسور يمسك على الوساده ولا يعود للاعلى وهنا تختل عمليه سحب الورق ونجد بان الطابعه تسحب اكثر من ورقه وتحدث كذلك عمليه الحشر..ولتفاذي هذه المشكله ام تغير الوساده التي فوق ال relay او تنظيفها او يمكن قطع ورق صغير من الورق التي تكون فيها لزوحه مثل ورق طابعه البركود gt420 لكي تمسك على relay(اقصد بعض الورق تكون فيه ماده عند قرشها تمسك على الحديد) وهنا تحل المشكله او نستخدم طريقتك كما تفضلت.......تحياتي لك لكل ماتقدمه من معلومات
Thanks! It really helped. I was already thinking of retiring my old man, but it's a pity. After all, my bro has been helping me out for 15 years. Now my children will soon be printing essays on it.
You are the best! Your instructions are so clear they didn't have to be in English. Can't thank yo enough!
You're welcome!
Thanks
Thank you for posting this, it gave me some pointers to fixing the same fault on my HL-2150. The root cause of the problem is a little foam sound-deadening pad which gets pressed by the lever when the T1 solenoid is energised. Over time this pad becomes sticky and causes the lever to hang in the 'energised' position, initiating another paper feed before the previous sheet is printed and thus causing a jam. Tensioning the return spring, as you have done here, may help for a while but the real solution is to get rid of the sticky pad. You can either cover it with a bit of paper, remove it altogether or replace it with a small piece of felt as I have done with mine. This requires a bit more dismantling but should give a more lasting repair. I hope this helps. Thanks again for the video and your English is a lot better than my Arabic!
Thanks alot for this declaration.
Always aim removing the old pad from the relay and just keep any glossy stickers.
This is done in more than one video in the Chanel's.
th-cam.com/video/yGlhHvkQTb8/w-d-xo.html
Thanks bro, didn't need the language to understand. Glad to keep something working.
Excellent video. To take the side panel off on a 2140w, there's a locking tab on the back edge towards the bottom.
Thanks
Great video, fixed the problem! Thanks heaps!
بارك الله فيك
و جزاك الله خيرا
احسنتم بارك الله فيك
This fix worked perfectly for me... thank you!
Thank you. Saved my 10 yo printer.
شــــــــــــــــاهد /\ /\ /\ /\ /\ /\ /\ المـــــــــــــــــزيد
Playlists يمكنك الاطلاع على كافة قوائم التشغيل في القناة من هذا الرابط
th-cam.com/channels/MQEb5XU2e0hKfPiH2QRnrQ.htmlplaylists?view_as=subscriber
Thanks a lot , you save my printer of a cruel death ;)
SUPER!!! SHOKRAN! THANK YOU!!!!!
Welcome
طبعا هذه المشكله متكرره في اغلب الطابعات وخصوصا البراذر وكمان طابعات hp سبب المشكله ان magnetic relay فيه على السطح وساده وعند تلفها تكون هناك ماده لزجه وعند نزول السنسور يمسك على الوساده ولا يعود للاعلى وهنا تختل عمليه سحب الورق ونجد بان الطابعه تسحب اكثر من ورقه وتحدث كذلك عمليه الحشر..ولتفاذي هذه المشكله ام تغير الوساده التي فوق ال relay او تنظيفها او يمكن قطع ورق صغير من الورق التي تكون فيها لزوحه مثل ورق طابعه البركود gt420 لكي تمسك على relay(اقصد بعض الورق تكون فيه ماده عند قرشها تمسك على الحديد) وهنا تحل المشكله او نستخدم طريقتك كما تفضلت.......تحياتي لك لكل ماتقدمه من معلومات
جزاكم الله خيرا على الوصف الدقيق للمشكلة والحل الغير مكلف
اضافة بسيطة ان الوسادة توضع من اجل عدم ظهور صوت
شكرا مفيد جدا
عاشت ايدك
muchisimas gracias arreglé mi impresora gracias a este tutorial, muchas gracias .
Alabado sea Allah, Señor de los Mundos الحمد لله رب العالمين
السلام عليك محتاج مساعتك وارشادك عندي نفس الطابعه اخرجت الكاترج وحقنة حبر وذلك بعد ان اشر عندي اللون الاصفر وبعده بقه الاصفر مشتغل وماتطبع ورق
Thank you for your help.
thank you bro
welcome friend
Looks goods..but need to explain in global language so all can understand
this is Arabic language
Yes, i know how to fix it but it keeps on happening.....:-(
Some times it depends on how much you stretch the spring metal
Or it needs changed